Technician Module 2 Unit 5 Slide 1 MODULE 2 UNIT 5 Incident Command/ Unified Command
Technician Module 2 Unit 5 Slide 2 Unit 5 Learning Objective At the completion of this unit the student will have a comprehensive understanding of ICS and Unified Command. The students will be able to fill out a complete report of an in class scenario using all of the standard ICS forms provided in this unit and being able to act in any area of ICS specifically the Safety Officer and Operations Commander.
Technician Module 2 Unit 5 Slide 3 Student Performance Objectives Know and follow Incident Command System and Unified Command System procedures and steps required for implementation of each system. Understand how the two systems are to work together. Know the Incident Command System and be able to follow Unified Command System procedures for integration and implementation of each system. Know how the systems integrate and support the incident. Be familiar with the overall operation of the two command systems and be able to assist in implementation of the Unified Command System if needed. Know how to implement the Incident Command System that the department has in its emergency response plan. Have the skill and knowledge to serve as the emergency operations officer for on-scene activities.
Technician Module 2 Unit 5 Slide 4 Student Performance Objectives Be able to implement the department’s emergency response plan as well as the local and regional emergency response plan. Know how to access local assets to help with on-scene emergency medical assistance. Coordinate these activities with the operations officer and on-scene incident commander. Coordinate implementation of the necessary medical monitoring protocols with the emergency medical manager and the incident commander for those responders entering and leaving the hot and warm zones. Be able to assist in implementation of rehabilitation assistance to those emergency responders that suffer from heat stress or other problems that can be controlled or reduced on the scene. Be aware of assets available from the department and from local and regional emergency response organizations, especially regarding handling specialized hazards or threats that may occur on the scene of a potential WMD event. Know how to obtain desired assets for on-the-scene support, if needed.
Technician Module 2 Unit 5 Slide 5 Student Performance Objectives Be aware of assets available from regional, State, and Federal sources pertaining to handling EMS response and public health needs on the scene of a potential WMD event. Know how to coordinate with the operations officer and the incident commander requests for desired assets for on-the- scene support, if needed. Be able to identify department, local, regional, and State assets that are relevant to the HazMat response team. Know and follow protocols for working and coordinating with other agencies under the Unified Command System to handle specialized hazards and threats on the scene of a potential WMD event. Know and follow protocols, procedures, and practices for working with and coordinating assignments with other agencies under the Unified Command System.
Technician Module 2 Unit 5 Slide 6 Student Performance Objectives Understand and know how to implement termination procedures at the close of an emergency response incident. Be able to assist the incident commander in completing required documentation related to the termination procedures, including appropriate measures for cost recovery. Know how to conduct or assist in conducting a critique of the actions taken during the complete response to the WMD and/or hazardous materials event. Be able to assist the incident commander or designee in conducting the incident critique and in identifying lessons learned. Assist in determining what improvements need to be made before the next emergency response to a potential WMD event, especially improvements specific to law enforcement and special operations.
Technician Module 2 Unit 5 Slide 7 Student Performance Objectives Be able to conduct or assist in conducting a critique of the actions taken during the complete response to a WMD event. Assist in documenting lessons learned from the critique as they pertain to HazMat response activities. Assist in identifying what improvements need to be made by the HazMat response team before the next HazMat or WMD event. Coordinate with the on-scene incident commander strategies to mitigate on-scene hazards that could endanger emergency responders or the public. Understand the importance of and know how to implement termination procedures at the close of an emergency response to a WMD or hazardous materials event. Be able to assist the incident commander in completing required documentation related to the termination procedures, including measures for cost recovery. Know and follow departmental guidelines in dealing with the local media during a potential WMD event.
Technician Module 2 Unit 5 Slide 8 Incident Command System Incident Command System (ICS) is a management system used to organize emergency response. ICS offers a scalable response to an emergency (incident) of any magnitude, and provides a common framework within which people can work together.
Technician Module 2 Unit 5 Slide 9 Examples of where to use ICS Fire, both structural and wild land. Medical, when there are multiple patients Inter-agency, where different agencies must work together Natural disasters, such as tornadoes, floods, ice storms or earthquakes. Human, animal and plant disease / pest outbreaks. Search and rescue missions. Hazardous materials incidents. Criminal acts and crime scene investigations. Terrorist incidents, including the use of weapons of mass destruction. National Special Security Events, such as Presidential visits or the Super Bowl. Other planned events, such as parades or demonstrations.
Technician Module 2 Unit 5 Slide 10 How ICS Helps Meets the needs of incidents of any kind Allows personnel from various agencies to mold into a common management structure Provides logistical and administrative support to operational staff Is cost effective by avoiding duplication of efforts
Technician Module 2 Unit 5 Slide 11 History of ICS The Incident Command System (ICS) was developed in the 1970s following a series of catastrophic fires in California's urban interface. Property damage ran into the millions, and many people died or were injured.
Technician Module 2 Unit 5 Slide 12 Organization of ICS Command Finance / Admin Logistics Operations Planning Public Information Officer Safety Officer Liaison Officer
Technician Module 2 Unit 5 Slide 13 Levels of Incident Command The following are descriptions and responsibilities of all the levels of incident Command. These are standard descriptions and can be used as they are listed here in your own Field Operations Guide (FOG).
Technician Module 2 Unit 5 Slide 14 Command Element On most incidents, a single Incident Commander carries out the Command activity. The Incident Commander is selected through pre-designation, qualifications, or experience.
Technician Module 2 Unit 5 Slide 15 Unified Command While a single Incident Commander normally handles the command function, an ICS organization may be expanded into a Unified Command for complex responses which cross jurisdictional boundaries or involve multiple agencies with geographic or functional jurisdiction.
Technician Module 2 Unit 5 Slide 16 ICS Command Staff Incident Commander Information Officer Safety Officer Liaison Officer Agency Representative National Resource Damage Assessment (NRDA) Representative Incident Investigation
Technician Module 2 Unit 5 Slide 17 Operations Staff Operations Section Chief Staging Area Manager Branch Director Division / Group Supervisor Strike Team / Task Force Leader Single Resource
Technician Module 2 Unit 5 Slide 18 Operations Continued Recovery & Protection Branch Director Protection Group Supervisor On Water Recovery Group Supervisor Dispersants Operations Group Supervisor Shore Side Recovery Group Supervisor Disposal Group Supervisor
Technician Module 2 Unit 5 Slide 19 Operations Continued Emergency Response Branch Director Search & Rescue (SAR) Group Supervisor Salvage / Source Control Group Supervisor Fire Suppression Group Supervisor Hazardous Materials Group Supervisor Medical (EMS) Group Supervisor Law Enforcement Group Supervisor
Technician Module 2 Unit 5 Slide 20 Operations Continued Wildlife Branch Director Wildlife Recovery Group Supervisor Wildlife Rehabilitation Center Manager
Technician Module 2 Unit 5 Slide 21 Planning Section Planning Section Chief Situation Unit Leader Display Processor Field Observer Geographic Information System Specialist Resource Unit Leader
Technician Module 2 Unit 5 Slide 22 Planning Continued Check-In / Status Recorder Volunteer Coordinator Documentation Unit Leader Demobilization Unit Leader Environmental Unit Leader
Technician Module 2 Unit 5 Slide 23 Planning Continued Technical Specialist Scientific Support Coordinator Sampling Specialist Response Technologies Specialist Trajectory Analysis Specialist Weather Forecast Specialist
Technician Module 2 Unit 5 Slide 24 Planning Continued Resources at Risk (RAR) Specialist Shoreline Cleanup Assessment Specialist Historical / Cultural Resource Specialist Disposal (Waste Management) Specialist Legal Specialist Human Resources Specialist
Technician Module 2 Unit 5 Slide 25 Logistics Section Logistics Section Chief Service Branch Director Communications Unit Leader Medical Unit Leader Food Unit Leader Support Branch Director
Technician Module 2 Unit 5 Slide 26 Logistics Section Continued Supply Unit Leader Ordering Manager Receiving 7 Distribution Manager Facilities Unit Leader Security Manager Ground Support Unit Leader Vessel Support Unit Leader
Technician Module 2 Unit 5 Slide 27 Finance Section Finance / Administration Section Chief Cost Unit Leader Time Unit Leader Equipment Time Recorder Personal Time Recorder Procurement Unit Leader Compensation / Claims Unit Leader
Technician Module 2 Unit 5 Slide 28 Standard ICS Forms Appendix A of your manual has all of the standard forms for classroom discussion and real world use.
Technician Module 2 Unit 5 Slide 29 ICS at WMD Scene The WMD Tech with the increased knowledge about the Incident Command System, should know how to implement the ICS that the department has in it’s emergency Response Plan. WMD Techs should also have the skill and knowledge to serve not only as the Safety Officer but also be able to serve as the emergency operations officer for on-scene activities.
Technician Module 2 Unit 5 Slide 30 Emergency Response Plans The State of Ohio has an ERP. This plan coordinates state assets when they are needed to supplement local responders. Ohio’s Homeland Security and Emergency Management Agency is responsible for maintaining and coordinating this plan. Technicians should be aware that if local HazMat resources are exhausted additional resources can be obtained through mutual aid agencies, by agreements already in place throughout the state.
Technician Module 2 Unit 5 Slide 31 Medical Monitoring The Incident Commander should ensure that there is an appointed person for coordination of the necessary medical monitoring protocols. This most likely would be conducted with and appointment of an emergency medical manager by the incident commander for those responders entering and leaving the hot and warm zones.
Technician Module 2 Unit 5 Slide 32 Asset Acquisition WMD Techs should be aware of the resources that are available around them locally, regionally, statewide and Federally.
Technician Module 2 Unit 5 Slide 33 Termination Procedures Debriefing Critique After Action Lessons Learned Documentation
Technician Module 2 Unit 5 Slide 34 Public Information Each agency will have differences with how they handle the releases of public information. It is important for the Incident Commander to appoint a dedicated person to speak on behalf of the incident so that the same message is being transmitted to the media and the public with reference to the incident and how it is being handled and any special instructions that may be needed.
Technician Module 2 Unit 5 Slide 35 Risk Reduction As a part of the on going evaluation processes of the incident, there is a constant need to weigh the evaluations looking for any risks that arise. If a particular risk is observed or noted, it is the responsibility of the appointed risk manager to assess the extent to which the risk exists and give the incident command reduction recommendations for a safer operation.
Technician Module 2 Unit 5 Slide 36 Unit 5 Quiz
Technician Module 2 Unit 5 Slide 37 Questions