New ranges System proM compact® and Compact Home ABB BA ATAP – BU 3118 Enclosures & DIN-rail Products

New MCB and RCD product ranges To improve and modernize the well proven proM range, a new range, proM compact has been introduced end of last year in some selected markets. We are now introducing this range into all our markets - step by step, together with the economic Compact Home range, in markets where this is useful

The right range for any application To differentiate between economical ranges for domestic / residential installations and high performance ranges for commercial / industrial applications and to offer the customers the best possible solution, 2 distinctive different, but yet similar and combinable ranges, have been created System proM compact, the modular installation system for all applications, but specifically for high performance demand in industries Compact Home with limited features for easy and simple use in building installation

System proM compact

System proM compact range The new complete range at a glance: Miniature circuit breakers (MCB's) Residual current devices (RCD's) Surge protection devices MDRC's Protection devices Command devices Load management devices Measuring devices Other devices Busbars and accessories

System pro M compact range A PLUS in all areas of application System proM compact, the modular installation system for DIN rails Launched successfully and greeted enthusiastically by experts and users A full range is now available, covering all applications for electrical building installation System proM compact is the logical next step of development after System proM

System proM compact range: plus Better access Due to the new design: Upper and lower shoulders reduced 50% more working space between the rows Outgoing and incoming connection points are easily accessible Comfortable, precise installation of devices, even where only very limited space in the consumer unit is available MCB's and RCD's have an optimized design, providing for an even safer connection technology

System proM compact range: plus A clear view, instead of feeling the way Now rear-mounted busbars Wire connection point in front Result: an unobstructed view on all connection points never fumble for the right connection point again improved safety tangible time-savings

System proM compact range: plus No possibility of mistakes New ABB terminal technology: Bi-directional cylinder-lift terminals, foolproof and failsafe Inaccurate - or even incorrect – fixing of wires or cross wiring is impossible, due to the new design of the terminal This also excludes the risk of a subsequent electrical accident, e.g. risk of fire caused by creepage current.

System proM compact range: plus Easier to replace DIN-rail mounting system makes it easy to replace devices (MCB's, RCD's) from the assembly No time-consuming extra work: Busbar remains with the assembly. To remove the device, just loosen the screw, lift the device and pull it out. If necessary, all devices of the series connected to the new proM compact busbars may be exchanged easily and quickly, e.g. to implement the adaptation to the standard VDE 0100, part 410

System proM compact range: plus Individual, efficient labeling of devices From now on, you will be able to use the self-adhesive labels that can be applied directly on the devices. For a transitory period, you may just as well use for some devices the self-adhesive system in combination with the still commonly used plug-on technique.

System proM compact range: plus New product line name The new type code system indicates the category to which a device is allocated This facilitates your product selection

System proM compact range: plus Outstanding, uniform design From MCB's and RCCB's to modular installation devices, all components of the system are distinguished by a clear, functional appearance Homogenous design that makes the technology's perfection and the precision with which the electrician made the installation visible also for the customer

System proM compact range Protection Devices MCB's (Miniature circuit breakers) RCCB's (Residual current circuit breakers) Main RCCB’s RCBO's (Residual current operated circuit breakers with overcurrent release) RCD-blocks (Residual-current unit to be fitted on MCB's)

New ABB MCB range Type code system for the new MCB's S 200 L „L“ stands for 4,5 kA rupturing capacity S 200 6 kA rupturing capacity S 200 M „M“ stands for 10 kA rupturing capacity S200 P „P“ stands for up to 25 kA rupturing capacity

S202 M C10 Type code system for new proM compact MCB's Rated currents: 0.2…63A Tripping characteristics: B, C, D, K, Z Breaking cap.: 4,5 - 6 - 10 up to 25 kA N° of poles: 1 - 1+N - 2 - 3 - 3+N - 4 Family: S200 = MCB's

Compatibility old series vs. new series Overlapping and mixing of old and new series is possible without problems, thanks to: Same terminal height on DIN-rail of old and new series for both MCB's and RCD's on the bottom side Same profile and same dimensions – same frontal looks New MCB Old MCB New RCCB/RCBO busbar

Provides protection against: New RCD's: 3 families RCCB’s RCBO’s Blocks Provides protection against: (with MCB’s) Overload Short circuit Earth leakage Indirect contact Earth leakage Indirect contact Overload Short circuit Earth leakage Indirect contact

Actual ABB RCD offer ABB SACE ABB STOTZ DS652 / DS672 F364 / F374 / F394 F362 / F372 / F392 DS951 / DS651 DS654 / DS674 DDA F364 / F374 / F394 F272 / F282 F362 / F372 / F392 F271 F274 / F284 ABB STOTZ

New ABB RCD’s – one common range RCCB’s F 200 AC / F 200 A RCCBs type AC/A (ex F360/F370) RCBO's DS 200 AC / DS 200 A RCBO's type AC/A 6kA (ex DS650/DS750) DS 200 M AC / DS 200 M A RCBO's type AC/A 10kA (ex DS670/F270) RCD-blocks DDA 200 AC / DDA 200 A RCD blocks type AC/A (ex DDA60/DDA70)

Tripping time: S for selective New proM compact RCCB's type code system F204 A S - 63/0,03 Sensitivity: 10 - 30 - 100 - 300 - 500 mA Current: 16 - 25 – 40 – 63 – 80 – 100 A Tripping time: S for selective Types: AC - A N° of poles: 2 - 4 Family: F200 = RCCB's

Tripping time: S for selective New proM compact RCBO's type code system Breaking cap.: 4,5 - 6 -10 - 25 kA Tripping characteristics: B - C - D - K - Z DS202 L A S - C10/0,03 Sensitivity: 10 - 30 - 100 - 300 - 500 mA Rated currents: 6A…63A Tripping time: S for selective Types: AC - A N° of poles: 1+N - 2 - 3 - 4 Family: DS200 = RCBO's

Tripping time: S for selective Family: DDA200 = RCD blocks New proM compact RCD block type codes DDA202 A S - 25/0,03 Sensitivity: 30 – 100 – 300 – 500 mA Current: 25 - 40 - 63 A Tripping time: S for selective Type: AC - A N° of poles: 2 - 3 - 4 Family: DDA200 = RCD blocks

RCCB's: improved performance… RCCB's: improved short circuit performance - Short circuit performances combination Im = short-circuit breaking capacity Inc= conditional short-circuit breaking capacity Actual F3 Im = 1500 A Inc= 6000 A with 63 A gL fuse SCPD New F200 Im = 1000 A Inc= 10000 A with 100A gL fuse SCPD 6000 63 10000 100

MCB's: auxiliary element innovation The Product Range Accessories Universal signal / auxiliary contact Retrofittable to the right hand side of MCB's and RCCB's Can be switched with a setscrew to either function "signal contact“ or "auxiliary contact" Up to 3 units could be mounted to 1 base device Busbar facility Separate positions for outgoing / incoming terminals. Terminals can be re-tightened Test and reset functions No parts can be lost

MCB's: auxiliary elements Accessories Auxiliary switch S2C-H 6R only as add-on to circuit-breaker without test function Shunt trip: 2 models for different voltage levels Undervoltage trip: 6 models for different voltage levels

Same auxiliary devices for MCB's and RCD’s DDA200 blocks are fitted on the left side of S200 MCB's, by that allowing a complete accessoriability for the MCB – the same auxiliary devices can now also be fitted to RCCB’s MOD UR + H + H MCB’s 1 to 4P RCCB’s 2P or 4P S/H + H + H RCD-block 2P, 3P or 4P ST + H + H

RCCB's: auxiliary elements Actual F3 New F200 AR UR + H + H S/H + H + H RCCB 2P or 4P H RCCB 2P or 4P H = Auxiliary contact S/H = Auxiliary/signal contact UR = Undervoltage release ST = Shunt trip AR = Automatic resclosing unit ST + H + H

RCD-blocks: an auxiliary release for MCB's DDA200 blocks will be fitted on the left side of the S200 MCB's, by that allowing a complete accessoriability for the MCB MOD UR + H + H MCB 2P, 3P or 4P S/H + H + H RCD-block 2P, 3P or 4P ST + H + H

RCD-blocks: easier installation Housing with holes in the upper side… ...assure an easy wiring of MCB's fitted with RCD-blocks with standard busbars …allow the possibility to fit MCB's fitted with RCD-blocks on the ways of Type B distribution boards

System proM compact range Surge protection devices class B arrester class C arrester class D arrester MDRC's: protection devices Residual current relays Toroidal transformer for RCD’s Fuse holders Fuse switches

System proM compact range MDRC's: command devices Universal signal / auxiliary contact Auxiliary contact for MCB's Shunt trips Undervoltage trips Installation contactors Alarm indicators Pushbuttons, switches, indicator lights Isolators Remote switches Latching relays Latching relays electronic Installation relays New isolator range E200, similar range as E 270 / E 240

System proM compact range MDRC's: load management devices Time-delay relays (TDR) Time switches Timers Staircase timers Dimmers / high-performance dimmers Light level switches Twilight switches Electronic potentiometers

System proM compact range MDRC's: measuring devices Elapsed time meters Energy consumption meters Analog and digital ammeters and voltmeters

System proM compact range MDRC's: Other devices Bells Bell transformers Emergency lights for consumer units Undervoltage monitoring relays Mains disconnection relays Socket-outlet (SCHUKO® /UNEL type) Various accessories Special busbars Self-adhesive labeling system

Compact Home The perfect supplement to cover all requirements Compact Home the simple range for basic requirements which can be combined with the proM compact range Compact home with a basic range of products: MCB’s and RCCB’s and limited features for easy and simple use in building installation Add last version of photo!!!

Compact Home… … in addition to the standard range… …only one range all over the world, identified by the black toggle for both RCCB’s and MCB's …in order to cover all market’s requirements: Compact Home range dedicated to low-end market, standard range for tertiary and industrial applications …compatible both with old System pro M series and new System pro M compact series Add last version of photo!!! …mainly for residential and commercial applications …all required functions are available

Compact Home A range dedicated to buildings applications, for both residential and commercial Compact Home range offers the two essential types of protection for building applications: one against overcurrent and short-circuit with the SH 200 and one against earth-leakage with the FH 200 Compatibility with System proM compact and System proM range permits to complete the Compact Home range with many other functions from the proM compact range RCCB FH 200 MCB SH 200

Compact Home SH 200 range Compact Home offers a wide range of MCB's, suitable for all applications and installation habits in buildings Available in: Amp ratings: 6 - 40 A Tripping characteristics: B and C Poles: 1-, 2-, 3-, 4-pole, 1 + NA and 3 + NA Breaking capacities: 3 kA, 4.5 kA and 6 kA

SH 201 L – C 8 Compact Home SH 200 designation Rating in A (6…40 A) Breaking capacity in kA: 3 - T 4,5 - L 6 - no suffix Rating in A (6…40 A) Tripping characteristic (B, C) Number of poles (1-2-3) H = Compact Home range Family S = MCB

Compact Home SH 200’s main technical features are marked in front of product: Marking with a clear indication of family, number of poles, breaking capacity, tripping characteristic, rated current and rated voltage Wiring diagram to prevent from a wrong connection SH 200 is available in 3 different versions: 3 - 4.5 - 6 kA to suit the individual market requirements. SH 200 complies to IEC/EN 60898 and carries all the relevant approval marks for the foreseen markets

Compact Home SH 200 terminals SH 200 shows a 25 mm2 cage terminal suitable for busbar and cable connection The terminal position offers full compatibility to other Compact Home components, all standard components of System proM compact as well as System proM.

Compact Home FH 200 range Compact Home offers a wide range of RCCB's, suitable for all applications and installation habits in buildings Available in: Sizes: 25, 40 and 63 A Sensitivity thresholds: 0.03, 0.1 and 0.3 A Poles: 2 and 4 poles Types/classes: AC and A

FH 202 AC - 25/0.03 Compact Home SH 200 designation Sensitivity threshold  0.03, 0.1 or 0.3 Type Number of poles (2 & 4) Current  25, 40 or 63 A H = Compact Home range Family F = RCCB

Compact Home FH 200 is easy recognizable, thanks to: Laser-printed home in front of product Test button – which must be tested monthly – with “TEST” indication in English in order to be international Black toggle (the same colour of SH 200’s one) Yellow snap on device

Compact Home FH 200’s main technical features are marked in front of product: Marking with a clear indication of family, range, number of poles, type, rated current, sensitivity threshold and rated voltage (see also slide 8) FH 200 reaches a Inc value of 6000A in coordination with a fuse of 63A; Im=IDm=1000A Part number in order to allow a quick identification of the device Wiring diagram to prevent from a wrong connection

Compact Home FH 200 terminals FH 200 has the same terminals as the proM compact (failsafe bi-directional cylinder lift terminals The front slot of the terminal can be wired with cables up to 25 mm2, while the back one is suitable for wiring with busbars or cables up to 10 mm2.

Compact Home More information about the FH 200 FH 200 complies to IEC/EN 61008 and the range has all the international marks and approvals of the countries in which it will be offered FH 200 devices are also conforming to the EU standards 2002/95/CE regarding the restriction of dangerous substances used in electrical equipment. On the back of the product the corresponding symbol is shown and it means that the RCCB must be disposed off separately from general litter Installation instructions are laser-printed on the side of the product

Compact Home range vs proM compact range Name of the range clearly indicates also in the commercial designation H means “Home range” On the RCCB, a little home will be marked in the front, too Black switching toggle for both FH 200 and SH 200 Wiring diagrams marked in front of both SH 200 and FH 200 (in all pole versions), same as for MCB's and RCCB’s of the standard range Add original photo for RCCB!!!!

Compact Home range vs proM compact range Compact Home range cannot be coupled with auxiliary devices versus System proM compact range can be coupled with a wide range of auxiliary devices

SH 200 versus S 200 S 200 has got a black plastic fixing device with 3 positions, which allows the withdrawal without any tools in presence of a busbar versus Metal fixing device with standard functionality only for SH 200 (withdrawal of the MCB without tools in presence of a busbar is not possible) SH 200 S 200 Possibility to withdraw S 200 in presence of a busbar without tools as indicated in the instruction sheet

SH 200 versus S 200 SH 200 has 25 mm2 wide cage terminals and can be wired with FH 200 with compact busbars both from upper and lower side versus S 200 shows failsafe bidirectional cylinder-lift terminals which permits a faster and safer connection Busbar connection between MCB‘s of the ranges proM, proM compact and Compact Home possible

FH 200 versus F 200 No contact position indication (CPI) for RCCB FH 200 versus Presence of CPI to signal position of RCCB F 200’s contact Black switching toggle versus Blue switching toggle

Yellow snap on device with only 2 positions for RCCB FH 200 FH 200 versus F 200 Yellow snap on device with only 2 positions for RCCB FH 200 versus Black snap on device with 3 positions for RCCB F 200 (withdrawal without tools in presence of busbar is possible) Possibility to withdraw FH 200 only in absence of a busbar, is also indicated on the side of the product

FH 200 versus F 200 “TEST” marked on the side of the test button for FH 200, same as for standard F 200 (English marking is considered international) In front of the FH 200 a Inc value of 6000 A, reached in coordination with a 63A fuse (and this is sufficient for residential applications), is marked versus F 200’s level of coordination is higher: Inc = 10000 A with a 100A back up fuse

Compatibility old series vs. new series Overlapping and mixing of old and new series up to 63 A is possible without problems, thanks to: Same terminal height from DIN-rail of all series, for both MCB's and RCD's on the bottom side Same profile and same dimensions – same frontal looks proM compact MCB RCCB Compact Home MCB RCCB proM MCB RCCB busbar

Availability of the new series