Ge-0/1/1 GE-0/0/23 GE-0/0/ / /29 lo0: /32lo0: / /29 GE-0/0/7 lo0: /32 lo0: /32 GE-0/0/ MPLS/ldp/ibgp/isis Dest: /32 NH: Dest: /32 NH: BBOM_VRF PE1PE2 CE1CE2

PE1# run show configuration | display set set interfaces ge-0/0/7 media-type copper set interfaces ge-0/0/7 encapsulation flexible-ethernet-services set interfaces ge-0/0/7 unit 100 vlan-id 100 set interfaces ge-0/0/7 unit 100 family inet address /29 set interfaces ge-0/1/1 unit 0 family inet address /29 set interfaces ge-0/1/1 unit 0 family iso set interfaces ge-0/1/1 unit 0 family mpls set interfaces lo0 unit 0 family inet address /32 set interfaces lo0 unit 0 family iso address set routing-options autonomous-system set routing-options forwarding-table export BBOM_select_LSP set protocols mpls static-label-switched-path PE1-PE2 transit next-hop set protocols mpls static-label-switched-path PE1-PE2 transit pop set protocols mpls interface ge-0/1/1.0 set protocols bgp group bgp_internal type internal set protocols bgp group bgp_internal local-address set protocols bgp group bgp_internal family inet unicast set protocols bgp group bgp_internal family inet-vpn unicast set protocols bgp group bgp_internal neighbor set protocols isis interface ge-0/1/1.0 ldp-synchronization set protocols isis interface ge-0/1/1.0 point-to-point set protocols isis interface ge-0/1/1.0 level 1 disable set protocols isis interface lo0.0 passive set protocols ldp interface ge-0/1/1.0 set protocols ldp interface lo0.0 set policy-options policy-statement BBOM_export term a from protocol static set policy-options policy-statement BBOM_export term a from protocol direct set policy-options policy-statement BBOM_export term a then community add BBOM_VRF set policy-options policy-statement BBOM_export term a then accept set policy-options policy-statement BBOM_export term b then reject set policy-options policy-statement BBOM_import term a from protocol bgp set policy-options policy-statement BBOM_import term a from community BBOM_VRF set policy-options policy-statement BBOM_import term a then accept set policy-options policy-statement BBOM_import term b then reject set policy-options policy-statement BBOM_select_LSP term a from protocol bgp set policy-options policy-statement BBOM_select_LSP term a from protocol static set policy-options policy-statement BBOM_select_LSP term a from protocol direct set policy-options policy-statement BBOM_select_LSP term a from community BBOM_VRF set policy-options policy-statement BBOM_select_LSP term a then install-nexthop lsp PE1-PE2 set policy-options policy-statement BBOM_select_LSP term a then accept set policy-options community BBOM_VRF members target:65000:10 set routing-instances BBOM_VRF instance-type vrf set routing-instances BBOM_VRF interface ge-0/0/7.100 set routing-instances BBOM_VRF route-distinguisher 65000:10 set routing-instances BBOM_VRF vrf-import BBOM_import set routing-instances BBOM_VRF vrf-export BBOM_export set routing-instances BBOM_VRF vrf-table-label set routing-instances BBOM_VRF routing-options static route /32 next-hop run show route inet.0: /32 *[Direct/0] 4w5d 16:46:13 > via lo /32 *[IS-IS/18] 00:07:37, metric 10 > to via ge-0/1/ /29 *[Direct/0] 2w6d 22:50:22 > via ge-0/1/ /32 *[Local/0] 2w6d 22:50:22 Local via ge-0/1/1.0 inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both /32 *[LDP/9] 00:07:47, metric 1 > to via ge-0/1/1.0 BBOM_VRF.inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both /32 *[Static/5] 02:01:50 > to via ge-0/0/ /32 *[BGP/170] 00:07:12, localpref 100, from AS path: I, validation-state: unverified > to via ge-0/1/1.0, Push /29 *[Direct/0] 02:01:50 > via ge-0/0/ /32 *[Local/0] 02:01:50 Local via ge-0/0/ /29 *[BGP/170] 00:07:12, localpref 100, from AS path: I, validation-state: unverified > to via ge-0/1/1.0, Push 16 iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both /72 *[Direct/0] 4w5d 16:44:56 > via lo0.0 mpls.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 4w5d 16:43:04, metric 1 Receive 1 *[MPLS/0] 4w5d 16:43:04, metric 1 Receive 2 *[MPLS/0] 4w5d 16:43:04, metric 1 Receive 13 *[MPLS/0] 4w5d 16:43:04, metric 1 Receive 16 *[VPN/0] 02:01:51 to table BBOM_VRF.inet.0, Pop *[LDP/9] 00:07:47, metric 1 > to via ge-0/1/1.0, Pop (S=0) *[LDP/9] 00:07:47, metric 1 > to via ge-0/1/1.0, Pop *[MPLS/6] 00:28:00, metric 1 > to via ge-0/1/1.0, Pop (S=0) *[MPLS/6] 00:28:00, metric 1 > to via ge-0/1/1.0, Pop bgp.l3vpn.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 65000:10: /32 *[BGP/170] 00:07:12, localpref 100, from AS path: I, validation-state: unverified > to via ge-0/1/1.0, Push :10: /29 *[BGP/170] 00:07:12, localpref 100, from AS path: I, validation-state: unverified > to via ge-0/1/1.0, Push 16

CE1# run ping PING ( ): 56 data bytes 64 bytes from : icmp_seq=0 ttl=64 time=0.916 ms 64 bytes from : icmp_seq=1 ttl=64 time=0.805 ms 64 bytes from : icmp_seq=2 ttl=64 time=0.691 ms ^C ping statistics packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.691/0.804/0.916/0.092 ms CE2# run ping PING ( ): 56 data bytes 64 bytes from : icmp_seq=0 ttl=62 time=1.662 ms 64 bytes from : icmp_seq=1 ttl=62 time=1.634 ms ^C ping statistics packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 1.634/1.648/1.662/0.014 ms Ping Successful….but I think this is follow the ldp signaled lsp….because when I deactivate ldp…ping was unsuccessful….. But I want to follow the mentioned static lsp path PE1-PE2