Visit us:

Visit us: Table of Contents About Katt Industries n.v. Katt Fusion Colors – Introduction – Features – Applications – Properties Projects Working with Katt Industries

Visit us: About Katt Industries n.v. Katt Industries was established in 1992, in Brussels, Belgium. Initially specialized in Wood Finishes, the company was mainly active in the Gulf Area of the Middle East. After positive feedback from wood finishes in the Industrial sector, Katt Industries launched a new range of decorative finishes based on metallic powders dedicated to professional end-users. Recently, Katt Industries n.v. developed a unique Architectural range for mineral surfaces and developed a specific range of products dedicated to contractors, architects, project managers, construction material resellers, etc.

Visit us: Fusion Coloring The market requirement to uniformly color exposed aggregate concrete, led to years of research and on-site trials. Katt Industries created a unique, environmentally-friendly suite of coloring products and systems. Further developments addressed various technical difficulties encountered in coloring concrete in a cost-effective, practical and industrial way; thereby allowing the usage of new, bold and natural decorative effects.

Visit us: Katt Concrete Fusion colors react and penetrate through the surface keeping sharp details Common paints form a film on the surface and erode details Katt Fusion Colors « Change color without altering surface texture »

Visit us: Katt Fusion Colors - Features  Suitable coloring technique for commonly-used construction materials (precast and exposed aggregate concrete, GRC, etc.)  Enlarged design possibilities. Katt Fusion Colors go beyond the usual beige and grey concrete colors, and enable the addition of decorative shadows, additional hues, special effects, etc.  Economically cheaper than integrating pigment additives into the production process.  Highly resistant to harsh climatic conditions as opposed to common organic paints. This is mainly due to the unique pigments and reactive properties of Katt Fusion Colors.

Visit us: Katt Fusion Colors can be applied to any mineral surface such as: precast, exposed aggregate, GRC, artificial stones, GRG, etc. However, it is important to note that the optical properties of a surface’s texture affects color perception. Katt Fusion Colors - Applications

Visit us: Katt Fusion Colors - Application Methods Katt Fusion Colors can be applied by spray, paint roller or brush. The material needs to be applied at temperatures above 5°C, and during hot conditions, it should be applied at cooler times during the day. Application should be avoided when the surface is hot or exposed to direct sunlight or during intense wind conditions.

Visit us: Katt Fusion Colors - Special Properties Katt Fusion Colors are unique products designed to alter the color of mineral surfaces and cured concrete, through chemical fusion. This provides a protection that lasts for decades. Katt Fusion Colors are environmentally-friendly, sustainable, green products, with zero emission VOC, containing no organic solvents, using reactive penetrant colors and are non-off gassing. Their exclusive formulation changes colors of substrates without altering surface texture. Katt Fusion Colors “Petrify” fuse by binding to any silicates within the substrate, forming a micro-crystalline structure and a breathable finish. This forms a permanent chemical bond, fused insoluble compound of color, becoming an integral part of concrete - mineral surfaces (natural stone, marble, GRC, brick, etc.). Unlike a coating, Katt Fusion Colors do not form a film on the substrate, hence the colors will not chip, crack, fade, or peel, as with traditional paints or other surface application products.

Visit us: Projects

Visit us: Working with Katt Industries n.v. From its very early stages, Katt Industries has used its R&D capabilities and know-how to improve its existing product range and reinforce its market share. With the same motivation and willingness to penetrate new markets, Katt Industries recently decided to shift to construction support industries, such as precast, decorative panels, GRC etc. and enter the market with its exclusive and unique architectural finish products. In order to effectively penetrate into new markets, Katt Industries believes in close-collaboration with local partners, with strong market knowledge.