УПРАВЛЯЮЩАЯ КОМПАНИЯ Moscow 2010

УПРАВЛЯЮЩАЯ КОМПАНИЯ All gas turbine engines for pipelines made and installed from 1991 until 2008 CompanyType Specifications Basic air engineAmount Power, MWEfficiency, % «Perm Motors» JSC GTU-4PG4,0824,2D-301 GTU-6PG6,2927,37D-302 GTU-10P10,2631,9PS-90A40 GTU-12P12,433,8PS-90A74 GTU-16P16,4435,8PS-90A169 GTU-25P25,5638,5PS-90A3 Total 289 «Saturn – Gas Turbines» JSC GPA-4RM4,132,5no24 GPA-6,3RM6,4632,58no1 GPA-10RM10,1635,5no4 AL-31ST16,836,0AL-31F Total 29 «Ufa Engine Industrial Association» JSC, «Motor» SPE AL-31STN16,837,0AL-31F31 Total 31 «Kuznetsov» JSC, N.D.Kuznetsov STC NK-12ST6,326,3NK-12MV459 NK-14ST-88,5432,0NK-12MP181 NK-14ST-1010,634,0NK-12MP7 NK-36ST26,536,0NK-3215 Total 662 «Klimov» JSC GTP-1,251,27626,0TVЗ-1173 GTP-2,52,5526,0TVЗ-117 Total 3 Total

УПРАВЛЯЮЩАЯ КОМПАНИЯ Main world energy market sectors for gas turbines Oil and gas extraction Oil and gas extraction – extraction from depth, pumping of water and gas into stratums. Oil and gas processing Oil and gas processing – petroleum refining, gas cleaning. Oil and gas transport Oil and gas transport – gas liquation, oil and gas pumping to storages and pipelines.

УПРАВЛЯЮЩАЯ КОМПАНИЯ Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC GTU-4PG Industrial Gas Turbine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 4,0 Efficiency at power turbine shaft, % 24,0 Exhaust gas temperature, °С 419 Power turbine / step-up gear rotation speed, rpm / Exhaust gas flow, kg/s 28,7 Service life: - overhaul interval, h assigned, h GTU-4PG gas turbine with M-45PHG step-up gear is used as a mechanical drive of centrifugal natural gas compressors in "Ural" GPA-4PHG gas turbine pumping packages of underground gas storages. The gas turbine is suitable for operation under moderate and cold climate conditions. The core of the gas turbine is the D-30EU-2 gas turbine engine developed on the basis of the D-30 III Series aero-engine. M-45PHG step-up gear matches the power turbine speed (7014 rpm) and mechanical drive shaft nominal speed (14000 rpm).M-45PHG step-up gear makes it possible to optimize the parameters of a gas turbine pumping package. The first gas turbine has been installed at Kasimovskaya compressor station of Mostransgaz. It is currently in experimental commercial operation in "Ural" GPA-4PHG gas pumping package.

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTU-6PG Industrial Gas Turbine Engine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 6,17 Efficiency at power turbine shaft, % 26,82 Exhaust gas temperature, °С 472 Power turbine / step-up gear rotation speed, rpm / 9000 Exhaust gas flow, kg/s 33,3 Service life: - overhaul interval, h assigned, h The updated GTU-6PG gas turbine with M-60 step-up gear was developed as a mechanical drive for centrifugal compressors used in gas turbine pumping packages. M-60 step-up gear makes it possible to optimize the parameters of a gas turbine pumping package. In 2006 the first gas turbine was installed at Myldzhinskoe gas- compressor field of Tomskgazprom. The gas turbine is currently in pilot operation in "Ural" GPA-6DKS gas pumping packaged unit. The gas turbine is also used as part of "Ural-6000"gas turbine pumping package, which was delivered to the Booster Station- 2 within the Sakhalin-2 Project. Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTU-10P Industrial Gas Turbine Engine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 10,3 Efficiency at power turbine shaft, % 33,1 Exhaust gas temperature, °С 454 Output speed, rpm Exhaust gas flow, kg/s 42,9 Service life: - overhaul interval, h assigned, h GTU-10P industrial gas turbine is based on GTU-12P gas turbines and is used in the packaged modular gas pumping units, in gas boost compressor stations (BCS), and stations of underground gas storage (UGS), and in particular in GPA-10 BCS "Ural" and GPA-10 UGS "Ural" manufactured by Iskra, and also, for retrofitting the existing GPA-C-6,3 packages and others. The distinctive feature of the design are a high-speed power turbine that contributes to high efficiency of a gas compressor and a gas generator unified with GTU-12P gas turbine. The gas turbine inherited all advantages of GTU-12P. Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTU-12P Industrial Gas Turbine Engine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 12,37 Efficiency at power turbine shaft, % 34,6 Exhaust gas temperature, °С 470 Output speed, rpm 6500 Exhaust gas flow, kg/s 46,1 Service life: - overhaul interval, h assigned, h GTU-12P gas turbine is used as a mechanical drive of a centrifugal natural gas compressor in gas turbine pumping packages. GTU-12P has been successfully proven in service at Russian gas pumping stations. It is operated as part of "Ural" GPA-12 packaged modular gas pumping unite manufactured by Iskra and is used to retrofit the existing gas pumping packages such as GTK-10, GPA-C-16 and some others. GTU-12P core is the PS-90GP-1 gas turbine engine based on the PS- 90А aircraft engine, the only one Russian fourth generation civil aviation engine with International Type Certificate. Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTU-16P Industrial Gas Turbine Engine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 16,47 Efficiency at power turbine shaft, % 37,0 Exhaust gas temperature, °С 466 Output speed, rpm 5300 Exhaust gas flow, kg/s 57,2 Service life: - overhaul interval, h assigned, h GTU-16P gas turbine has been designed on the basis of the gas generator of the high performance PS-90 aircraft engine and GTU-12P gas turbine. The gas turbine has higher cycle parameters (utilization of 14- stage compressor) and has a power turbine adapted to the existing gas turbine pumping packages. The gas turbine is used in the GPA-16 "Ural" packaged modular-type gas pumping units manufactured by Iskra, and for the reconstruction of the existing gas turbine pumping sets, such as GTK-10, GPA-C-16, GPU-16, GPU-10 and others. GTU-16P gas turbines have perfectly promoted themselves while running at gas compressor stations of Russia. It is unified and completely interchangeable with GTU-12P gas turbine, and inherits all the advantages and merits of the latter. Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTU-25P Industrial Gas Turbine Engine Specification (ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg) Power turbine shaft output, MW 25,6 Efficiency at power turbine shaft, % 40,0 Exhaust gas temperature, °С 451 Output speed, rpm 5000 Exhaust gas flow, kg/s 80,7 Service life: - overhaul interval, h assigned, h Among Perm gas turbines GTU-25P has got the highest power rated at 25 MW. It is intended to drive gas compressors in new- generation gas compressor packages, and to pump gas into underground gas storage. GTU-25P is based on the PS-90GP-25 gas turbine engine, which is an industrial derivative of the high efficiency PS-90A aero engine incorporating as well GTU-12P and GTU-16P gas turbine components. The engine consists of: two-shaft gas turbine gas generator module; power turbine module. The engine and power turbine located on the common engine mount are installed on the gas compressor package skid. Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list CustomerLocationAmountOperation start Gazprom transgaz MoscowKasimovskoe UGS1Operation testing Total1 Operating time, h7 498 CustomerLocationAmountOperation start Tomskgazprom Myldzhinskoe NGF22007 Total2 Operating time, h MW 6 MW Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Gazprom transgaz TchaikovskyKarashurskoe UGS22003 Gazprom dobycha Urengoy GBS-2V/ GBS -2V1 balancing and commissioning Gazprom dobycha Orenburg Sovhoznoe UGS6shipment GBS Gazprom dobycha YamburgGBS -1V62004 Gazprom transgaz UfaKanchurinskoe UGS62007 Gazprom transgaz SaratovElshanskoe UGS4 balancing and commissioning 10 MW Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) NOVATEK - TarkosaleneftegazHancheiskoe NGF2assembling NORTGAZS-Urengoiskoe NGF2 balancing and commissioning Lukoil – Zapadnaya SibirS-Gubkinskoe NGF2 balancing and commissioning RosneftPriobskoe NGF3shipment Total44 Operating time, h Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Gazprom transgaz Tchaikovsky GBS-2 Permskaya11994 GBS-2 Permskaya11996 GBS-2 Permskaya12001 GBS-2 Permskaya12005 GBS-18 Ordinskaya51995 Gazprom transgaz SamaraGBS -11 Pavlovskaya31997 Gazprom transgaz EkaterinburgGBS -12 Shatrovskaya31999 Gazprom transgaz UfaGBS -6 Sharan42000 Gazprom transgaz Moscow GBS Tuma41998 GBS Belousovo22002 GBS Volokolamskaya22006 GBS Voskresenskaya32008 Gazprom transgaz Yugorsk GBS Novourengoiskaya GBS Novourengoiskaya MW Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Surgutneftegaz GBS-42 Fedorovskaya32001 GBS -44 Fedorovskaya42003 Gazprom transgaz KubanGBS Kracnodarskaya52003 Gazprom transgaz StavropolGBS Stavropolskaya52003 Gazprom transgaz Uhta Mikun2shipment Gryazovets2shipment Myshkino1shipment YuganskneftegasPriobskoe NGF32007 Total72 Operating time, h Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Gazprom transgaz Tchaikovsky GBS-18 Ordinskaya11995 GBS -2 Permskaya21995 GBS -1 Gornozavodskaya42001 GBS -19 Tchaikovskaya42002 Gazprom transgaz SamaraGBS Sokovka22004 Gazprom transgaz Ekaterinburg GBS -12 Shatrovskaya92000 GBS Dolgoderevenskaya1shipment Gazprom transgaz UfaGBS -6 Sharan22001 Gazprom transgaz KubanGBS Kamensk Shahtinskaya42007 Gazprom transgaz Yugorsk GBS Purovskaya GBS Purovskaya GBS Novokomsomolskaya12005 Gazprom dobycha Noyabrsk GBS Zapadnotarkosalinskaya42003 GBS Zapadnotarkosalinskaya4 balancing and commissioning Gazprom transgaz StavropolGBS Salskaya MW Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Gazprom transgaz VolgogradGBS Volgogradskaya52003 Gazprom transgaz Uhta GBS Urdoma42006 GBS Vuktyl22005 Gazprom dobycha Yamburg GBS GBS Gazprom transgaz Surgut GBS Purtazovskaya GBS Purtazovskaya GBS Purtazovskaya GBS Purtazovskaya Gazprom dobycha Nadym GBS Yamsoveiskaya52003 GBС Yamsoveiskaya-26 balancing and commissioning GBS Yubileinaya62003 Yubileinaya GBS Gazprom transgaz Saint-Petersburg GBS Smolenskaya62004 GBS Torzhokskaya62004 BeltransgazGBS Krupskaya72005 TurkeyGBS Sivas3 balancing and commissioning Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start SeverneftegazYuzhnorusskaya4shipment TarkosaleneftegazVostochnotarkosalinskaya GBS62006 Total160 Operating time, h Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) CustomerLocationAmountOperation start Gazprom transgaz TchaikovskyGBS Igrinskaya12004 Total1 Operating time, h MW Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list (continue) IndexGTU-4PGGTU-6PGGTU-10PGTU-12PGTU-16PGTU-25P Availability ratio10,99 Technical operation ratio 0,990,980,960,980,970,98 Starting safety factor10,9710,99 0,94 Total units Total power, MW Overall operating time, h Leading unit operating time, h Operating performance Gas turbines for gas pipelines by «Perm Motors» JSC Gas turbines for gas pipelines by «Perm Motors» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Gas-Pumping Unit GPA-4RM GPA-4RM - automated gas-pumping unit of container version with rated power about 4 MW. It is intended for use at stations of underground storage of gas and gas pipelines. Gas turbine GTD-4RM by capacity 4 MW is used as a drive of compressor, it was developed on base of ship engine М-75Р. Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Specification Power turbine shaft output, MW 3,5 - 3,8 Exhaust gas flow, m 3 /s 27,4 – 91,1

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list GPA-4RM ManufacturerCustomerLocationAmount Operation start Saturn – Gas Turbines LentransgazGBS Izborskaya52007 MostransgazUGS Kaluzhskoe22006 MostransgazUGS Kasimovskoe LentransgazGBS Krasnoznamenskaya22005 Total 15 Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GPA-6,3RM - automated gas-pumping unit of container version with rated power 6,3 MW. It was developed according to modern requirements of the gas industry for use at reconstruction of existing compressor stations (with replacement of drives D T and NK-12ST which have developed the resource) and building of new compressor stations for GAZPROM. GTD-6,3RM is the drive of this unit, it was created on base GTD-4RM. GTD-4RM are successfully maintained at compressor stations of GAZPROM now. Gas-Pumping Unit GPA-6,3RM Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Specification Power turbine shaft output, MW 5,7 – 9,6 Output speed, rpm Exhaust gas flow, m 3 /s 127,3 – 167,8

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list GPA-6,3RM ManufacturerCustomerLocationAmountOperation start Saturn – Gas Turbines Mostransgaz GBS Gavrilov Yam12007 Total 1 Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ Gas-Pumping Unit GPA-10RM According to the program of long-term cooperation with Gazprom, Saturn has developed and serially makes gas-pumping units GPA-10RM (on a basis of GTD-10RM drive). It is used for reconstruction of existing and buildings of new compressor stations. Units are completely correspond to the technical and operational requirements of GAZPROM, have the developed system of remote control with high degree of protection. Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Specification Power turbine shaft output, MW 9,3 – 10,0 Output speed, rpm 4800 Exhaust gas flow, m 3 /s 227,4 – 347,2

УПРАВЛЯЮЩАЯ КОМПАНИЯ Reference list GPA-10RM ManufacturerCustomerLocationAmountOperation start Saturn – Gas Turbines SevergazpromGBS Nuksenitsa22007 Total 2 Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC Gas turbines for gas pipelines by «Saturn – Gas Turbines» JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ AL-31ST-based GPA-16-AL URAL Modular Gas-Pumping Unit Specification Power turbine rated shaft output, MW 16 Efficiency, % 36 Fuel gas characteristics at gas-turbine engine inlet: -fuel gas pressure, MPa (kgf/cm 2 ): 2,74+0,2(28+2) -fuel gas temperature, °С Fuel gas flow at rated conditions, kg/s (max), 0,902 Air mass flow through compressor, kg/s (max) 64,5 Gas turbines for gas pipelines by «UEIA» JSC, «Motor» SPE Gas turbines for gas pipelines by «UEIA» JSC, «Motor» SPE

УПРАВЛЯЮЩАЯ КОМПАНИЯ NK-12ST Industrial Gas Turbine Engine The engine NK-12 ST is the first gas- turbine engine of the aviation type created in 1974 for the gas industry on the base of the aircraft turboprop engine NK-12 MV, which was installed on the aircrafts TU-95, TU-114, AN-22 and other. The engine NK-12ST has a high degree of the reliability and economy in the operation. The output of the gas-pumping units with this engine is 11 million m3 of the gas in twenty-four hours. About 2000 engines were manufactured during the series production. Their total operating time made up about hours. The engines are operated at more than 100 compressor stations as part of the more 800 gas-pumping units. These engines showed they-selves to the best advantage during their operation. At present time the plant prepared the substitution for the engine NK-12ST and began the production of more perfect engine NK- 14ST. Specification Output shaft power, KW 6300 Rotational speed of the turbine rotor, rpm 8200 Exhaust gas temperature, K 843 Fuel gas consumption, kg/h 1820 Air consumption, kg/s 39 Drive efficiency, % 26,1 Mass, kg 3500 Overall dimensions: Length, mm 4742 Diameter, mm 1520 Life, h Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC

УПРАВЛЯЮЩАЯ КОМПАНИЯ NK-14ST Industrial Gas Turbine Engine The engine NK-14ST is designed by order of GAZPROM as a modification of the engine NK-12ST. This engine is created on the base of the engine NK-12ST and is completely interchangeable with it. The engine has improved general performance data. The change of the combustion chamber, turbo-compressor turbine, main and free turbines resulted in engine power and efficiency increase. The engine NK-14ST combines the great experience of NK-14ST engine operation and new achievements in the field of the aircraft engine manufacturing. It is distinguished by high reliability, simplicity in the maintenance, improved technical and ecological data, high efficiency. To date, we can manufacture an modified engine NK-14ST with regenerative cycle, increasing the engine efficiency up to 41.5%. Specification Output shaft power, KW 8600 Rotational speed of the turbine rotor, rpm 8200 Exhaust gas temperature, K 750 Fuel gas consumption, kg/h 1930 Drive efficiency, % 32 Mass, kg 3600 Overall dimensions: Length, mm 4742 Diameter, mm 1520 Life, h Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC

УПРАВЛЯЮЩАЯ КОМПАНИЯ NK-14ST-10 Industrial Gas Turbine Engine The main kinds of the drive in the range of GPU of gas transportation system of Russia are gas turbine sets. The analysis of the operating indices of GPU with gas turbine drive at the compressor stations shows that the most part of them has worked their motor life ( hours), physically weared out and morally became obsolete. The efficiency of the units range is on the level of 20… 21% at power from the nominal value. In this connection during the reconstruction of the operating compressor stations there is question about the installation of the modern gas turbine engines with efficiency more 33%. With the great overhaul life and high reliability. The variant of GTK-10-4, GPU- TS- 10B, GPS -10 serial engine substitution as worked out the life for NK-14ST-10 engine was considered. The leading development engineer of NK-14ST-10 engine is JSC Samara Design bureau of machine building (Samara). The leading supplier of the Gas turbine complex is JSC Motorostroitel (Samara). Specification Output shaft power, KW Rotational speed of the turbine rotor, rpm 8200 Exhaust gas temperature, K 507 Fuel gas consumption, kg/h 1820 Air consumption, kg/s 39 Drive efficiency, % 26,1 Mass, kg 3500 Overall dimensions: Length, mm 4742 Diameter, mm 1520 Life, h Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC

УПРАВЛЯЮЩАЯ КОМПАНИЯ NK-36ST Industrial Gas Turbine Engine The engine NK-36ST is created on the base of the production aircraft engine NK-32. It combines the last achievements in the field of the aircraft engine manufacturing and the great experience in the operation of the engines NK-12ST, NK-14ST on the cross-country gas pipelines. The engine NK-36ST id distinguished by the high reliability in the operation, high efficiency, the improved technical data. The level of the emission NOx is reduced up to 120 mg/m 3 on the engine NK-36ST. This is less than the norm (150 mg/m 3 ). The systems of the tolerance, of the control, of the protection and of the alarm, which secure the automatic starting, detection of the faults and parameters deviations at the operating engine are provided for the this engine. In addition, the anti-icing system, which permits to operate at the non- favorable atmospheric conditions is also provided for it. The modular construction of the engine permits to carry it by any kind of the transport, to make the replacement of the modules in the conditions of the compressor station. The gas-pumping unit with the engines NK-36 operates successfully at Tolyatti gas compressor station and has good operation data at the high degree of the reliability. Specification Output shaft power, KW Rotational speed of the turbine rotor, rpm 5000 Exhaust gas temperature, K 698 Fuel gas consumption, kg/h 5163 Drive efficiency, % 26,1 Mass, kg 8690 Overall dimensions: Length, mm 6000 Diameter, mm 2300 Life, h Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC Gas turbines for gas pipelines by « Kuznetsov » JSC, N.D.Kuznetsov STC

УПРАВЛЯЮЩАЯ КОМПАНИЯ GTP-1,25 and GTP-2,5 Industrial Gas Turbine Engines GTP industrial power units (power class from 1,25 to 2,5 MW) are developed and produced on the basis of TV2- 117, TV3-117, GTD-1250 and other Klimov’s engines. These units are designed to operate as power station modules (electrical and thermal electrical stations, pump stations, compressor stations etc.). The GTP power units are highly reliable, whether running on natural gas, associated gas, diesel fuel, gasoline, kerosene or their mixtures in any proportion. Depending on the required power output, the unit consists of one or two engines and a gearbox mounted on a common frame together with the necessary auxiliary equipment. These industrial power units may also be installed on a variety of means of transportation (heavy dump trucks, locomotives, marine and river speed boats, hovercraft). Specification Brand GTP-1,25 GTP-2,5 Type of gas turbine TV3-117 TV3-117 Power, MW 1,25 2,5 Gas turbines for gas pipelines by « Klimov » JSC Gas turbines for gas pipelines by « Klimov » JSC

УПРАВЛЯЮЩАЯ КОМПАНИЯ All types of engines for pipelines in Russian gas-transport system Gas turbines Electric motors Gasmotocompressors

УПРАВЛЯЮЩАЯ КОМПАНИЯ Perm Motors Saturn – gas turbines Ufa Engine Industrial Association, Motor Kuznetsov, N.D.Kusnetsov STC Klimov Market diagram of all United Engine Corporation’s gas turbine engines made from 1991 until 2008 Market diagram of all United Engine Corporation’s gas turbine engines made from 1991 until MW (459) 8 MW (181) 10 MW (7) 25 MW (15) 4 MW (1) 6 MW (2) 10 MW (40) 12 MW (74) 16 MW (169) 25 MW (3) 4 MW (24) 6 MW (1) 1,25 MW (3) 16 MW (31) 10 MW (4) Total – 1014 units

УПРАВЛЯЮЩАЯ КОМПАНИЯ Power class, MW ManufacturerTypePower, MWAmount 3,51 – 5,0UECSaturn – Gas TurbinesGPA-4RM4,15 5,1 – 7,5UEC Perm MotorsGTU-6PG6,292 Saturn – Gas TurbinesGPA-6,3RM6,461 10,01 – 15,0UEC Perm Motors GTU-10P10,263 Saturn – Gas Turbines GPA-10RM10,162 Perm Motors GTU-12P12,414 15,01 – 20,0UEC Perm Motors GTU-16P16,4410 Ufa Engine Industrial Association, MotorAL-31STN16,87 All United Engine Corporation’s gas turbine engines made in 2007 for CIS Total44

УПРАВЛЯЮЩАЯ КОМПАНИЯ All United Engine Corporation’s gas turbine engines All United Engine Corporation’s gas turbine engines at global market  The amount of United Engine Corporation’s engines for pipelines in other countries is 252*  The global market share of United Engine Corporation’s engines for pipelines is ~ 17,5%  The amount of United Engine Corporation’s engines for pipelines in other countries is 252*  The global market share of United Engine Corporation’s engines for pipelines is ~ 17,5% * Diesel & Gas Turbine WorldWide

УПРАВЛЯЮЩАЯ КОМПАНИЯ Main gas pipelines: «South Stream»