“Move & leave” lens zoom and focus adjustment method. “Move & leave” lens zoom and focus adjustment method. Patent no.: Patent no.: Best sensitivity in the world. ( Lux F# IRE) Best sensitivity in the world. ( Lux F# IRE) Over than 1000 TV line Over than 1000 TV line All the function is controlled through OSD. All the function is controlled through OSD. 100pcs of IR LEDs with no dark corners at night 100pcs of IR LEDs with no dark corners at night WDR WDR

Ceiling mount available This big size camera is usually available on wall mount only. But this P200 can be installed not only on the ceiling but also wall. And very fine calibration of bracket makes the camera direction very accurate as you want.

Patent no.: “Move and leave” Patent no.: It is difficult to make focusing sometimes as it is distorted when you fix it by screwing. So we made this “Move and leave” lens fixing method by rubber tension, you don’t need to screw it to fix it.

Easy installation First attach the junction box on the wall and insert hinge and then your hands will be free. You can connect all the cables easily by free hands and close the door and screw.

All the setting can be done through one door including lens adjustment You can adjust all the setting by opening one door on the bottom. After adjusting the lens, you don’t need to open another cap or door to do other settings.

Ventilation holes working Ventilation holes prevent water from being condensed on the window by reducing the temperature difference between inside and outside of camera, and the lowered temperature will prolong the life time of camera.

Various controls You can turn off IR LEDs when you don’t need sometimes by its excellent sensitivity. You can increase or decrease the power of IR LEDs. You can choose the day/night exchange time by volume switch.

Separated power input We made the power inputs for 12V DC and 24V AC and circuits inside separated to make it stable with high current. Power board has enough tolerance not only for 12V DC but also 24V AC.

Combination of IR LED angles IR LEDs of the camera should cover both wide and narrow angle according to the zoom of vari-focal lens. We used combination of IR LED angles, 10, 30, 45 to remove the dark corners when the lens wide. 100pcs of IR LEDs can reach 100m at night also.

Fan and Heater available Fan and Heater is available as an option to use it in a very harsh condition. When you use a heater, it will be working at -40 °C.

1000 TV line in color The higher resolution is important, but it is meaningless if sensitivity is poor at night. We are focusing not only on resolution but also sensitivity at night.

You can select Low, Middle, High DNR level. SNR 2D+3D will reduce the noise remarkably. SNR 3D is working on moving objects efficiently.