Serie de transmisores de TV Rohde & Schwarz NEW! R&S® NM/NW8500(VHF) R&S® THU9 (UHF) R&S® NH/NV8600(UHF) R&S® NH/NV8300(UHF), R&S® NM/NW8200(VHF) R&S®SCx8000(UHF/VHF) High power R&S®SV8000(UHF) Medium power R&S®SLx/XLx8000(UHF/VHF) Low power

R&S®SCx8000 SCx8000 – UHF and VHF Multistandard platform Digital standards: DVB-T/H ATSC ATSC Mobile DTV DAB, DAB+,T-DMB MediaFLO ISDB-T(B) Analog standards B/G, D/K, M, M1, N, I, I1 SCx8000 transmitters: SCV8000 - UHF TV transmitters SCW8000- VHF TV transmitters SCA8000 - VHF DAB transmitters Transmitter R&S®SCx8000, configured as SCV8302E, 600W DVB-T Efficiency of up to 22% for UHF and up to 24% for VHF, saves energy costs Broadband pre-corrected for quick commissioning

R&S®SCx8000 transmitter series Components 600W COFDM configuration SCV8302E in seven 19’’ HUs (UHF) 1 HU for R&S®SX801 3 HU for R&S®VH8301C1, basis amplifier 3 HU for R&S®VH8301C2 extension amplifier 600W COFDM configuration R&S®SCW8601E in only four 19’’ HUs (VHF) ! 1 HU for R&S®SX801 3 HU for R&S®VM8601C1

R&S®SX801 Backup exciter - Block diagram Comparison Backup Exciter and Dual Drive with NETCCU800 Remote R&S®SX801 (Control) Control Exciter A Remote R&S®SX801(Program) Exciter B RF Control CAN Amplifier stage R&S®NetCCU800 Remote Rack controller Amplifier stage CAN Backup exciter “Standard” dual drive with R&S®NETCCU800 for Nx8000 systems

R&S®SCx8000 transmitter series SCV8000 UHF output power classes Amplifiers Output power * COFDM ATSC / ATSC Mobile DTV ATV SCV8201x 1x VH8201C1 200 W 300 W 500 W SCV8301x 1xVH8301C1 450 W 700 W SCV8202x + 1x VH8201C2 400 W 600 W 1000 W SCV8302x 1x VH8301C1 1x VH8301C2 900 W 1400 W * output power depends on frequency, the given numbers are average powers

R&S®SCx8000 transmitter series SCW/SCA8000 VHF output power classes Amplifier Output power * COFDM (SCW) ATSC / ATSC Mobile DTV (SCW) ATV DAB (SCA) SCW/SCA8201 1x VM8201C1 200 W 350 W SCW/SCA8301x 1xVM8301C1 300 W 550 W SCW/SCA8401x 1x VM8401C1 400 W 700 W SCWSCA8601x 1x VM8601C1 600 W 1100 W * output power depends on frequency, the given numbers are average powers before filter

R&S®VH8000Cx UHF base amplifier - Block diagram Block diagram of R&S®VH8000C1, 200W/300W Dual Power Adaptor Board Power Supply 1 Power Supply 3 (optional) Power Supply 2 Fan 2 Amplifier Control Final Stage Control (CAN) Fan 1 Rf in Splitter / exciter switch Rf in Ext. amp out RF Monitor Driver Stage RF out (N) Amplifier Board

R&S®VH8000Cx UHF expansion amplifier - Block diagram Block diagram of R&S®VH8000C2, 200W/300W Dual Power Adaptor Board Power Supply 1 Power Supply 3 (optional) Power Supply 2 Fan 2 Amplifier Control Final Stage Control (CAN) Fan 1 Combiner RF in (N) RF out (7/16) Rf in RF monitor Driver Stage Amplifier Board RF out (N)

R&S®SCx8000 transmitter series R&S®VM8x01C1 VHF Amplifier Two power supplies ensure transmission with maximal 6dB power loss in case one power supply fails In case one of the three power supply fails, output power is reduced by 1 dB In case one fails one blower is able to cool the system without power loss (up to 80°C Air flow

R&S®SCx8000 transmitter series Head End Proposal HD/SD ONE SEG HD/SD/ ONE SEG BTS RF Mask Filter HD/SD ONE SEG

Muchas gracias por su tiempo!