“ Where SERVICE is everything, but SAFETY is first ” “All our equipment is manufactured with ENVIRONMENTALLY FRIENDLY PRODUCTS”

Double Body Seal Penetrator DBS-6000 w/ JB-20 Double Body Seal Penetrator

Introduction The DBS-6000, is a mechanical seal that offers the versatility to connect the power cable of the pump from the downhole to the surface, quickly and safely, minimizing rig time and total operation cost. Produced by:

Norma API 11S3 11S3 NORM The is fabricated under the Recommended Practice for Electrical Submersible Pump Installations Produced by:

API 11S3 Norm Recommendations Service Disconnected and Motor Control Panel VENTED JUNCTION BOX (OPTIONAL) SEE 4.3.4 & 4.3.5 ELECTRICAL SEAL FITTING AND VENT Transformer Bank Electric Assembly Wellhead Ground Rod Prodcution String GROUND CONDUCTOR Casing Splice Bands Produced by: American Petroleum Institute Surface Power Cable Downhole Pump Cable Pumping Assembly

THE SURFACE CONNECTION SYSTEM MAKES THE VENTING BOX IS OPTIONAL. SECURITY ALL PENETRATORS HAVE AN INTERN GROUND WIRE THAT CONNECTS THE WELLHEAD AND ALL ITS COMPONENTS. ALL PENETRATORS HAVE CERTIFY SEALS OF SECURITY AND VENTILATION AS A STANDAR PARAMETER OF MANUFACTURING. Produced by: THE SURFACE CONNECTION SYSTEM MAKES THE VENTING BOX IS OPTIONAL.

Class I, Divisions I & II Group D Manufacturing Standars The Seal Penetrator System is fabricated under the following standars: Explosion Proof NEMA 7 & 9 Class I, Divisions I & II Group D Produced by:

Double Body Seal Penetrator System 6000 Complete Assembly Junction Box Hanger Double Body Seal Penetrator System 6000 Produced by:

Reducer Bushing (Dummy Mandrel) Versatility The DBS-6000 replaces other models of the market without requiring any modification in the hanger. SPS JB-20 The figure shows a completation with a “BIW” Penetrator, this can be replaced by the SPS DBS- 6000 using a Reducer Bushing (Dummy Mandrel) BIW Penetrator Reducer Bushing (Dummy Mandrel) SPS DBS-6000 Produced by:

SPS DBS-6000 Outside the well Versatility The design makes it unique in its style, because the sealed system can be installed outside the hole. SPS DBS-6000 Outside the well Produced by:

Advantages The threaded coupling system, is designed so that once adjusted the upper with the lower mandrel, the piston ensures sealing elements on its seat, which gives a stamp of quality to each driver individually. Significantly minimizes the use of tools and equipment installation. Increases safety and reliability with the implementation of the Guide Pre-seal, used for cable alignment and primary seal. Complete Installation of equipment is between 30 to 40 minutes. Produced by:

Installed with Dummy Mandrel DBS-6000 on the Hanger DBS-6000 Installed with Dummy Mandrel DBS-6000 (Open View) Produced by:

DBS-6000 Parts O’ring (Viton) Upper Mandrel O 'ring (Viton) Bearing Piston Main Seals Lower Mandrel Pre-Seal Guide Produced by: Neck Transition

Wellhead Completation Caja de Empalme Cables de Potencia Colgador Penetrador DBS 6000 Produced by:

Installation of Connections SPS Surface Conduit J-Box (Open View) Conductor Ground Wire Produced by:

Installation of Connections SPS Surface Conduit J-Box (Open View) Splice Connector Produced by:

Installation of Connections SPS Surface Conduit J-Box (Open View) Produced by: Splice Boots

Surface Connection Drain and Vent Produced by:

Wellheads and Christmas Trees Commercial Information Other Products: Manufacturer Wellheads and Christmas Trees

Contact information Manufacturer & Sales Hector G. Ahow President Cra. 31 # 16-258 – Medellín Tel.: 57 (4) 583 8764 (57) 315 871 9278 Fax: 57 (4) 583 87 64 E-mail: hector@ahow.com.ve Web Page: www.ahow.com.ve