Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Startup/Shutdown Procedures

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 2 Startup 1.Turn on the computer monitor and verify that the TJ application is running.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 3 Startup (Cont.) 2.From the TJ application, check the drum temperature; it should be between 30°C - 32°C. 3.Verify that the application computer does not indicate any error messages.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 4 Startup (Cont.) Using solvent, printing heads gently from right to left Remove the night cover Order the bridge to maintenance position via the RTRun software Maintenance position 4.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 5 Startup (Cont.) 5.Make sure that the bridge is at the center or on the right side. 6.Select the On button in order to initialize the Machine.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 6 Shutdown: Preparing the Foam Night Cover Perform the first time only: The foam night cover has two distinct sides:  The side that covers the inkjet heads is made of foam.  The other side (facing the drum) is made of hard plastic. 1.Cut the polyethylene sleeve to length. 2.Insert the entire length of the foam night cover into the sleeve so as to completely cover it with the polythene. 3.Fold the ends of the polyethylene sleeve towards the back of the night cover and stick it together with adhesive tape.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 7 Shutdown 1.Set the drum to IDLE. 2.Shut off the 48V (from the RT Software main screen). 48V Maintenance position

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 8 Shutdown (Cont.) Place the bottom of the night cover into the ink drain at the bottom of the bridge. Using the solvent, clean the heads and cover them with polyethylene stretch film. 3.

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 9 4.From the RTRun application (Main window) click Off. 5.Wait for the bridge to complete its forward movement. 6.Push the bridge, manually, all the way towards the drum. Shutdown (Cont.)

Engineer Training Startup/Shutdown Procedures TJ8300 / TJ8500 Confidential 10 Shutdown (Cont.) 7.Turn off the printer via the TJ application. 8.Check that the actual temperature is OK. 9.Turn off the computer monitor. 10.Go home.