Satellites and Sensors Lecture 2 Satellites and Sensors IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics All Earth-orbiting satellites have elliptical orbit, or the special case of a circular orbit. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

a is the semi-major axis of the ellipse; The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics a is the semi-major axis of the ellipse; e is the eccentricity of the ellipse; a*e  is the displacement of the ellipse center from the center of the Earth; θ is the angle between the satellite's present radius vector and that at perigee (the orbit's closest point to the Earth). For the elliptical orbit the distance r of the satellite from the center of the Earth is given by the equation: IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

d θ / dt = [G * M * a ( 1 - e2 ) ]1/2 * r-2. The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics From Newtonian dynamics, the period T for the satellite to travel round the orbit is T = 2π (a3 /GM)1/2 where G is the constant of gravitation and M the mass of the Earth, and G * M = 3.98603 * 1014 m3 s-2 . The instantaneous rate at which the satellite describes its orbit is d θ / dt = [G * M * a ( 1 - e2 ) ]1/2 * r-2. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics When e is small, a = a * (1-e) and the orbit is called “circular orbit”. In this case the horizontal speed of the satellite is V0 = ( G * M / a) 1/2. Taking into account: R = 6378 km - Earth's mean equatorial radius; g = G * M / R2 - the acceleration due to gravity. Hence, V0 = R * [ g / (R+ h)]1/2. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics For Earth observation, three types of orbit are most useful: 1. Geostationary orbit The satellite orbits in the same direction as the Earth with a period of one day. It is positioned in a circular orbit above the equator. Therefore, it becomes stationary relative to the Earth and always views the same area of the Earth's surface. From equation T = 2π (a3 /GM)1/2 : T = 1 day = 86400 seconds => a = 42,290 km => h = a - R = 35,910 km. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics For Earth observation, three types of orbit are most useful: 2. Polar orbit i (inclination) ~ 90o. Usually these satellites have height between 500 and 2,000 km and a period of about1 to 2 hours. As the Earth rotates under this orbit the satellite effectively scans from north to south over one face and south to north across other face of the Earth, several times each day, achieving much greater surface coverage than if it were in a non-polar orbit.  IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

3. Nearly polar sun-synchronous orbit The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics For Earth observation, three types of orbit are most useful: 3. Nearly polar sun-synchronous orbit From equation for d Ω /dt it is possible for a given orbit height by a suitable selection of the inclination i to achieve d Ω /dt = 0.986 per day, which is equivalent to one rotation of the orbit plane per year. In this way the orbit plane is not fixed relative to stars, but fixed relative to the sun. The result is sun-synchronous orbit, in which the satellite crosses the equator at the same local solar time on each pass throughout the year. In practice  i is about 100, i. e., the orbit is not polar, but nearly polar.  IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits - Satellite orbital dynamics Orbit characteristics of oceanographic near-polar sun-synchronous satellites Satellite TIROS-N NOAA-6 NOAA-7 NIMBUS-7 Semi-major axis a (km) 7244 7202 7250 7335  Semi-minor axis (km) 7229 7185  7232  7174   Nominal height h (km) 855 815 860 950 Orbit inclination i () 98.9 98.7  98.9 99.3 Period (min) 102.2 101 102.3 104.9 Local equator crossing time 07.30 south-bound 15.00 north-bound 12.00 north-bound Orbits per day 14.1 14.2 13.7 IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic elements and sampling characteristics of satellite orbits Spatial and temporal sampling characteristics of orbits From the orbital period of sun-synchronous satellite we can estimate the distance between successive ground tracks. For example, for Landsat 1 the period is 103.2 min, and the distance is 25.8 degrees, which corresponds to a spacing at the equator of about 2,865 km. The distance between tracks decreases with latitude. Another important characteristic of remotely sensed data is the swath-width of the sensor. Typical swath-width is 1,500-2,000 km. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites All sensors employed on ocean-observing satellites use electromagnetic radiation to view the sea. This radiation travels through free space at the speed of light c ~ 3*108m s-1 . The frequency f and wave length λ are related by f  λ = c. So, the electromagnetic spectrum used in the sensor can be characterized by wavelength λ and/or frequency f. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites The electromagnetic spectrum, showing some bands definitions and typical remote-sensing applications. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Emission spectra at different temperatures. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Approximate transmittance of electromagnetic waves through the atmosphere. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites The choice of bands for remote-sensing application is governed by both the application and the atmospheric transmission spectrum. Hence, if features of the land and sea are to be observed by the reflection of incident solar radiation in the same way as the human eye observes, then the frequency range 100 nm - 100 m should be used. Alternatively, if the self-emission of radiation by the sea is to be means of remote sensing, sensors should be used for the 3 to 40 m wavelength range. However, not all the parts of these ranges are useful, since the atmosphere will not transmit them, as illustrated by the typical transmission spectrum of the atmosphere. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Usually the range 400 nm - 1 m is used to measure visible waves and about 10 m for infrared measurements. Above 10 mm there is very little absorption. These radar bands are exploited by active microwave sensors which create their own radiation with which to illuminate the target, and then observe the nature of the reflected signal, in contrast to passive IR and visible wavelength sensors which rely on naturally occurring radiation. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Active devices Altimeters 3 - 30 GHz Passive sensors Wavelength Information Visible wavelength radiometers 400 nm - 1 m Solar radiation reflected by Earth surface Infrared (IR) radiometers about 10 m Thermal emission of the Earth Microwave radiometers 1.5 - 300 mm Thermal emission of the Earth in the microwave Active devices Altimeters 3 - 30 GHz Earth surface topography Scatterometers Sea surface roughness Synthetic aperture radars Sea surface roughness and movement IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Passive sensors measure incoherent electromagnetic radiation. Active sensors illuminate the target (the sea) with their own pulse of electromagnetic radiation; hence, they measure not only the amplitude but also the phase of the reflected signal and the travel time of the pulse. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Sampling capabilities of sensors 2. Sensors on satellites Sampling capabilities of sensors The basic sensor is a radiometer, which measures the flux of electromagnetic energy reaching the sensor from a given small cone of directions (analogy with the human eye). As in the human eye, the sensors measure not only intensity but "color" of radiation (analogy with the human eye measuring the relative magnitude of radiation in three overlapping wavebands). IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Sampling capabilities of sensors 2. Sensors on satellites Sampling capabilities of sensors One way to measure different wavelengths is to split the electromagnetic signal using a prism. Another way is to use optical filters, which are transparent for some wavelengths and opaque for others. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Spatial resolution IFOV (Instantaneous Field of View or Instrument Field of View) is the angle of view from which a signal is received by the sensor at any one instant. This angle ΔΩ = ΔA/r2, where ΔA is the surface area observed at nadir and r is the distance between the instrument and the surface. Typical IFOV of optical and IR sensors is about 1 km. It is limited by the size of telescope a satellite can afford. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

2. Sensors on satellites Spectral resolution A multispectral sensor collects data at select wavebands or channels (e.g., AVHRR – 5; SeaWiFS – 8; MODIS – 36). When a sensor provides a continuous spectral coverage, it is called hyperspectral. In practice, it means that its spectral resolution is better than 10 nm or 0.01 µm and the number of channels >100. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Swath-filling geometry of scanner ground track 2. Sensors on satellites To produce areal coverage greater than a single swath of 1 IFOV width, the sensors are made to scan across the satellite tracking directions. Swath-filling geometry of scanner ground track IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Swath-filling geometry of scanner ground track 2. Sensors on satellites The scan timing is arranged so, that subsequent scans occur after the satellite has traveled a distance approximately equal to the IFOV projection on the satellite subtrack. Typically there are 2,000 - 4,000 samples along a scan line. The scanning is usually performed in one direction only because it is achieved by a rotating mirror. Swath-filling geometry of scanner ground track IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Variations of IFOV (spatial resolution) with view angle 2. Sensors on satellites The metric ground resolution varies with the distance from the satellite and the look angle relative to the total vertical. Variations of IFOV (spatial resolution) with view angle IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Spatial vs. spectral vs. temporal resolution 2. Sensors on satellites Spatial vs. spectral vs. temporal resolution To increase spatial resolution we either increase the length of the telescope or decrease its diameter. The length of telescope is limited by the size of the satellite. Decreasing the diameter of the telescope we make the electromagnetic signal weaker. When the total electromagnetic signal is split into several channels, the resulting signals at each channel are weaker than the total signal. As a result, to achieve a maximum of sensor sensitivity, we have to decrease a number of channels. Panchromatic sensors (i.e., the sensors measuring total electromagnetic signal) are most sensitive. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

Spatial vs. spectral vs. temporal resolution 2. Sensors on satellites Spatial vs. spectral vs. temporal resolution If we need more channels, we have to increase the time during which each pixel is taken. For this, we have to make the satellite swath more narrow. Landsat: 30 m resolution and 183 km swath; AVHRR, SeaWiFS and MODIS: 1 km resolution and >2000 km swath. Another solution is to use a geostationary satellite, because the signal at each channel can be accumulated during much longer time period. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

3. Satellite-to-Earth data transmission The information measured by sensors is converted into digital format, stored on magnetic media, and transmitted to the ground receiving stations. HRPT (High Resolution Picture Transmission) format enables transmission of raw information to the receiving stations located on the Earth's surface. Each station includes receiving antenna and computer for processing and storage of information. HRPT format is used in IR sensors AVHRR (Advanced Very High Resolution Radiometer) and optical scanners (e.g., SeaWiFS). IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

4. Data dissemination The method of data dissemination depends on for what purpose (commercial or research) they will be used. In the first case (commercial use) the data are transmitted directly to ships and coastal receiving stations and then processed and analyzed there. In the second case (scientific use) the data are processed in the large scientific centers of and disseminated via Internet. The processing requires sophisticated procedures of atmospheric correction, calibration and interpolation. IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors

The basic principles of remote sensing are described in the tutorial Fundamentals of Remote Sensing published by the Canadian Centre for Remote Sensing you can get this tutorial at the web-site http://www.ccrs.nrcan.gc.ca/resource/tutor/fundam/index_e.php IoE 184 - The Basics of Satellite Oceanography. 1. Satellites and Sensors