Proper Handling of Automotive Airbag Modules

REMEMBER ALWAYS USE THE REQUIRED PPE Airbag modules are explosive. Improper handling can lead to serious injury. An airbag deployment or activation ejects chemicals which can be harmful. Material Safety Data Sheets (MSDS) for the airbag modules currently in use at this facility are located _____________________. This presentation is intended to show you how to properly handle the airbag modules used here.

Styles of Airbag modules in use at this facility Driver/Passenger trim style (side curtain) Instrument Panel (IP) Knee position airbag Steering Wheel Chassis model

Driver/Passenger Trim model

Instrument Panel (IP) model Use BOTH hands! Opening pointing AWAY from you! Never lift or carry by the wires, connectors, or harness!

Knee position model Front – Away from you Rear – toward you Positioned in Kit Tote

Steering Wheel Chassis mount Always use two hands!

Proper handling and storage NEVER connect ANY electrical device to the module or the cable harness DO NOT install a damaged module. Notify your supervisor immediately if you discover a damaged module DO NOT attempt to repair a module. Notify your supervisor immediately if you discover a damaged module. NEVER carry airbags or components by wires, connectors or harnesses

Proper handling and storage NEVER Never heat the module Never drill the module Never weld or solder the module Never cut or machine the module Or any of the parts

Always carry with the opening pointing away from you. Always place or set the airbag with the opening pointing up. Treat airbag modules carefully and gently. Use two hands – be careful not to drop them. If an airbag is dropped, DO NOT USE THE AIRBAG! Always store airbags securely in designated storage area. Proper handling and storage

In the event of airbag deployment Contact the Supervisor immediately. Contact _______________ for plant safety/security. Report your location and request airbag cleanup. Stay away from the deployed airbag ! Treat every airbag as LIVE. Check for injured workers. Injuries may include burns, and/or chilled or frostbitten body parts. Contact emergency services if appropriate.

In the event of airbag deployment DO NOT ATTEMPT CLEANUP! Only trained personnel are qualified for cleanup. Contact ______________ plant safety/security. Powder residue on skin – Wash with soap and plenty of water. If there is contact with eyes, flush eyes with clean water for 15 minutes. Consult a doctor.

Personal Protective Equipment (PPE) No special equipment is required. Gloves and Safety Glasses are always a good idea.