WEEKLY SAFETY MEETING April 22nd, IRI 750 OGEC rig NGIRI2

2 Weekly statistics Days LTI free: 29 Stop cards: 23 Accident / Incident reporting from last week : 0 Anomalies: 0 Safety Alerts:0 Drills/Training: Well control and muster point - Very good response team Mini-camp inspection:1 Comments : To replace ASAP the kitchen container Rig inspection: Daily rig safety tour done by both HSE on site Comments : Do it the same in your work area.

Drills - training 3 Well control muster point On Monday 16 th BOP drill was successful and reaction of the key rig personnel was found satisfactory. BOP close time 59 sec. Most of non essential personnel present on the site gathered at muster point – HSE informed about exceptions. Only one of personnel forgot to turn his T-card, but was at muster point. Thanks to proactive rig floor crew. KEEP IT UP !!!

HSE TOPICS FOR THE WEEK 1/ Team work : it’s progressing but can do better 2/Communication : Importance of reporting. New comer on site, changing of shift with daily handover (night and day) 3/ Housekeeping : Concern each one of us, after job to clean work area, housekeeping is a daily job. Good HKP reduce the risk of fall by trip hazards and slippery. 4/ PTW : Need a time for preparation. Plan your job and request the PTW in advance. It’s save time for everyone. 5/ Fire extinguishers : New extinguishers located within the minicamp, in order to recover the risks everywhere. 6/ Safety devices : 3 EWS+ 1 shower on mixing area, dog house and mud tanks. 4 - Reference, date, place

5

Hands : most exposed part of human body 45% From TOTAL injuries records Statistics

Personal Protective Equipment (PPE) HSE weekly focus

8

9 Purpose and Scope Employees will have to wear protective gear to reduce injury risk. Appropriate PPE shall be determined prior to the commencement of the work. The following minimum PPE requirements shall be observed by all personnel at all times: - Head Protection - Eye Protection - Hearing Protection Ear muffs and plugs - Hand protection Gloves - Skin Protection Long sleeved coveralls, flame retardant fabrics - Foot Protection Protective glasses, dark glasses shall not be worn after sunset Hard hats with chin strap Safety toed shoes or boots

Additional PPE Requirements Additional Personal Protective Equipment (PPE) may be required by the task being performed or the environment of the work area : -Chemical handling, welding/cutting Operations, work at height above 2 meters, confined space entry protection… Some examples of specific PPE : Full body safety harness Face protection or suitable glasses Toxicity detector Self-contained breathing apparatus Filter mask Rubber gloves Sun cream ETC… 10

Training & reporting To be sure that Personal Protective Equipment fulfils its purpose, you should: Know the right PPE for your operations and how it should be worn Make sure you are trained in how to use it Report any difficulty you encounter in using it Report any PPE item that is missing or damaged Respect the rules requiring the wearing of PPE 11

“Wearing PPE is an essential rule. If someone fails to respect it, do you think she/he will respect the other rules?” rules?” 12

Is the good using for handrails ?

15 You prefer a seat, find a safe solution with welder…

RISKS ANALYSIS BEFORE START OPERATION ALWAYS CHOOSE A SAFETY ATTITUDE BECAUSE ROUTINE JOB CAN KILL EVERY DAY

THANKS FOR YOUR ATTENTION 17