RADIO + MCU + FLASH + USB Low-Power RF System-on-Chip Erling Simensen Product Marketing Low-Power RF Embargoed Until October 29, 2007

History of Chipcon 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Chipcon founded Design house Fabless semiconductor company From ASIC to ASSP Global expansion CMOS enables technology leadership ASSPs dominate revenue World’s first on ZigBee Texas Instruments Norway was established with the acquisition of Chipcon AS on January 24, 2006 and is now the Low Power Wireless headquarter located in Oslo, Norway Chipcon started in 1996 as a asic design house but quickly moved into standardized products for RF. Allready in late 2003 Chipcon released the industry’s first IEEE 802.15.4 transceiver, the CC2420. With the aquisition of Figure 8 Wireless, a ZigBee stack provider, in early 2005 Chipcon became a total solution provider for ZigBee. Acquired Figure8 Wireless Inc. ZigBee leader TI + Chipcon

Key Markets Industrial Consumer ZigBee LPW has three focus markets: Industrial, Consumer and ZigBee.

Global Frequencies This slide shows different open frequency bands used around the world. Often referred to as ISM bands.

CC1111 Low-Power RF SoC with USB Controller Market Leadership The CC1111 is the industry’s first sub-1 GHz RF system-on-chip (SoC) with an integrated USB controller, enabling a fast and easy bridge between PCs and RF. The integration of a high-performance radio, microcontroller, flash memory and USB controller results in smaller PCB size, easier assembly, reduced overall system cost and faster time-to-market. Complete Integration The CC1111 is pin- and register-compatible with the CC1110 (sub-1 GHz SoC), CC2511 (2.4 GHz SoC with USB) and CC2510 (2.4 GHz SoC) to deliver solutions for both sub-1 GHz and 2.4 GHz frequency ranges. SoC Family Combined with TI’s SimpliciTI™ network protocol, the CC1111 provides easy development and improved low-power designs for wireless sensor networking applications. Tools and Software

CC1111 Low-Power RF SoC with USB Controller CC1111 Features Radio + MCU+ Flash +USB = SoC Includes CC1101 transceiver frequency synthesizer that supports 1.2 Kbps – 500 Kbps data rate and multiple modulation formats Enhanced MCU, 8/16/32KB Flash and 1/2/4KB RAM Built-in full-speed USB 2.0-compliant interface Built-in AES-128 encryption and decryption co-processor Sleep current consumption of 0.3 µA Benefits Complete low-cost solution on one single chip SoC provides smaller PCB size, easier assembly and faster time-to-market No external processor needed for secure communciation Can connect directly to a PC Robust and secure link with good noise immunity Applications Alarm and security systems Automatic meter reading Industrial monitoring and control Home and building automation Remote controls And many more

Wireless Audio System Block Diagram Application Example Wireless Audio System Block Diagram

Product Roadmap Sub-1 GHz and 2.4 GHz SoC Family

CC1111 Tools and Support www.ti.com/cc1111 Get Started Today Datasheets & User Manual Development Kits & Samples SimpliciTI™ Network Protocol Technical/Applications Support Application Examples & Interface Libraries Low-Power RF and ZigBee Training Development Tools White Papers Describing Location Algorithm Low-Power RF Developer Network Development Kit Contents 2x SmartRF04EB 2x CC1110EM 1x CC1111EM USB dongle 2x antennas cables www.ti.com/cc1111

SimpliciTI™ Network Protocol SimpliciTI is a proprietary low-power RF network protocol aimed at small, low-power RF networks Resource requirements (MCU) are minimal which results in low system cost Easy implementation and deployment Low-power MCUs and RF chips are not enough to achieve low power consumption in end applications. A well engineered low-power RF protocol is essential TI wants to help the customer all the way from idea to mass production Runs out-of-the-box on several TI RF platforms: A small MSP430 + latest CC transceivers or our new 8051 RF SoCs Range can be extended through repeaters The circles represent range of gateway and extended range of repeaters

Tools: Packet Sniffer Packet Sniffer General packet sniffer available, runs on the dev kits Already supports SimpliciTI network protocol Packet sniffer can be used with all application examples, not just SimpliciTI The packet sniffer visualizes all RF traffic and content in a graphical format. Each packet receives a time stamp and RF protocol flow can be inspected in chronological order

Tools: SmartRF Studio SmartRF Studio Full support for all four SoCs Supports code export of all registers RX and TX packet testing can be done with any RF setting Includes suggested RF settings which are characterized (”preferred settings”)

Questions?