Product Functionality Overview PowerFilm Application Software

PowerFilm Microfilm Scanning Software gh Performance Digital Image Processing for the ABR3000D & 3000DSV and 2400DS & 2400DSV (Universal Microfilm Digitisers) PowerFilm Microfilm Scanning Software High Performance Digital Image Processing for the ABR3000D & 3000DSV and 2400DS & 2400DSV (Universal Microfilm Digitisers)

PowerFilm Also supports the ABR3000D and 2400DS scanners Supports Kodak’s new 2400DSV and 3000DSV models

PowerFilm Features (Version 5) *Windows NT/ Bit Application *Software Only Solution *Direct SCSI Interface (Adaptec 2940/2930/2904) *Drives the Scanners at rated speeds *Supports all Native Scanner Functionality

*Support for Duplex scanning *Support for Optional Scanner Functionality *Auto Skew Correction *Auto Focus *Greyscale board (3000DSV/2400DSV) *Image Control *Creates Standard CCITT G3 or G4 images *Resolutions DPI (600 and 800 DSV only) *Image Composition - Text, Photo, Fine Mode 1, Fine Mode 2 PowerFilm Features (Version 5)

PowerFilm User Interface

*Start Scanning / Stop Scanning *Press the Green traffic light to start scanning *Press the Red traffic light to stop scanning

PowerFilm User Interface *Scanning control parameters available on Control Tabs *Each Control Tab contains settings that can be saved in user defined ‘Configurations’.

PowerFilm User Interface *The Image Tab controls Image creation settings, e.g. *Image size *Image resolution *Composition/Compression *Brightness/Contrast *Use the mouse to define custom scan area’s (rubber band)

PowerFilm User Interface *The Batch Tab controls output options, e.g. *Output Folder *File naming/numbering *Document Boundaries *Output Format *Document Type

PowerFilm User Interface *The Index Tab allows the user to assign index data to images as they are scanned - or post scanning. *Up to 10 user defined index fields *A data file is written in the same folder as the images

PowerFilm User Interface *The Options Tab controls film type and scanner options, e.g. *Film polarity *Frame masking/elimination *Frame auto centering *Auto Focus *Auto Exposure (brightness)

PowerFilm User Interface *The Film Tab controls the Mini MARS II controller *Only available if a Mini MARS II controller is detected *Two Level image mark counting on 16mm Microfilm *Navigate to frame position *Batch Scanning - from batch/item for n frames or n batches

PowerFilm User Interface *Image Display *Images are displayed on the right hand side of the interface during scanning *Images may be manipulated using the controls above the image display

PowerFilm User Interface *Image Manipulation *Zoom *Rotate *Image Redaction (blank out) *Define areas of image that should be saved *Go to image number *Cut and Paste

PowerFilm Features *Print selected images or range of images in a batch *Scan and Print *Zoom Print *Fax selected images or range of images in a batch *Link to your package send images or range of images as attachments *Print/Fax and

PowerFilm Features *All Commonly used functions available via Keyboard accelerator keys/function keys (F1, F2, F3, etc.) *All Settings (image attributes, batch settings, scanner function settings, indexing schemes) saved in recallable configurations *All Processing controls available during scanning (Control Tabs) *Ease of Use

PowerFilm Features *All menus, dialogs and messages may be translated to any language without the need for a software programmer ! *Localisation

PowerFilm Features *Support for 3000DSV/2400DSV *Windows 2000 support (3000DSV/2400DSV only) *Greyscale board option (3000DSV/2400DSV) *Duplex scanning on the 2400DS/DSV *Front Panel Scan Control (3000DSV/2400DSV) *New in version 5 !!!!

PowerFilm Features *Suspend Batch Feature *New in version 5 !!!! *Suspend a batch and open it again later to continue scanning

PowerFilm Features *Batch Recovery Feature *New in version 5 !!!! *Allows users to recover a batch after a system failure

PowerFilm Features *Blank page drop out *New in version 5 !!!! *Allows users to define a byte count threshold below which images should automatically be discarded

PowerFilm Features *Adobe Acrobat PDF Output *New in version 5 !!!! *Additional Cost Option *Creates multi page PDF files for; whole batch, document boundaries or every scanned image

PowerFilm Features *Kofax Ascent output option *New in version 5 !!!! *Additional Cost Option *Automatically uploads batches to Kofax Ascent for further processing *Release from Ascent to a multitude of Document Management systems

PowerFilm Features *Multi Image Viewer *New in version 5 !!!! *Display 1, 4 or 6 images at a time

PowerFilm Features *New ‘Save As’ feature *New in version 5 !!!! *Save scanned image(s) outside of PowerFilm with user defined file names. *Save individual images or the whole batch (as a multi page tiff file)

PowerFilm Features *Integrated CD Publishing *New in version 5 !!!! *CDPublish is now integrated into PowerFilm *Allows users to create a database from the index and images created with PowerFilm *Users may freely distribute CDRetrieve (on CD) with the database