PM_WO_310 Components v41 PM Components PM_WO_310

PM_WO_310 Components v42 Course Content Introduction Unit 1- Components Process Unit 2 – Editing Components Unit 3 – Documents and Approvals Course Summary

PM_WO_310 Components v43 Learning Objectives Upon completing this course, participants will be able to:  Understand the PM components process through the work order  Enter requests for materials on the components tab to generate through the work order  Enter requests for services on the components tab through the work order  Change components on work order  Cancel components on work order  Attach documents to a work order

PM_WO_310 Components v44 Prerequisites and Roles Prerequisites  PM_UK_100 Plant Maintenance IRIS Awareness & Navigation  PM_WO_300 Work Orders Roles  PM Users

PM_WO_310 Components v45 Unit 1 Components Process

PM_WO_310 Components v46 Unit 1- Components Process Maintenance Process Components Process Stock, Non-Stock, and Non-File materials Enter Requisitions for Materials/Services Find Vendors

PM_WO_310 Components v47 Materials and Inventory Materials Management Inventory will be replacing Stores Inventory Systems On-shelf inventory will be minimized Moving toward “just –in-time” inventory (parts will be requisitioned daily) Moving away from ProCard being used for materials; instead, contracts will be set up

PM_WO_310 Components v48 Materials and Inventory There will be stock, non-stock, and non-file materials Materials may be planned (used on a routine basis) and unplanned Stock and non-stock will be identified by 6-digit numbers in IRIS

PM_WO_310 Components v49 Components Process Components can be selected in several ways:  A search may be performed to find the part number  In the future, the Bill of Material (BOM) may be used to suggest part numbers, if it has been entered for the building, room, or equipment to be maintained  In the future, if the BOM has been created, include the Task List on an order also will include any materials on that Task List

PM_WO_310 Components v410 Planned Materials Planned stock materials result in a Reservation being created in the Storeroom Planned non-stock materials/services result in a Purchase Requisition being created Planned text items are instructions/comments about the materials required for a work order, such as a note to bring a ladder or supplies

PM_WO_310 Components v411 Unplanned Materials Unplanned stock materials may be issued directly to a work order Storeroom MM Techs will issue the materials and charge it to the work order number The name of the person receiving the materials is recorded

PM_WO_310 Components v412 Search for Components By Description  The description is often used to search for maintenance orders  Asterisks can be used as “wildcards” in a search, to let you search using partial information  Examples:  *bearing* will find all materials with “bearing” in the description  *filter*16* will find all materials with “filter” and “16” in the description, such as Filter, Air, 16X20X1

PM_WO_310 Components v413 Search for Components By Bill of Materials (BOM) – Future Use  BOMs are parts lists that may be created for any Building, Floor, Room, or Equipment  BOMs list the parts frequently used to maintain that item  Parts may be directly selected from the BOM  BOMs can help plan work orders quickly

PM_WO_310 Components v414 Search for Components By Task List (Future Use)  Task Lists are maintenance procedures which include parts and labor  These may be created for any Building, Floor, Room, or Equipment  Including a Task List on an order will also include any materials on that Task List

PM_WO_310 Components v415 Stock & Non-Stock Materials Stock Materials  Parts which have IRIS material numbers and are kept in Central Stores Non-stock Materials  Parts which are used less frequently, have IRIS material numbers, and are ordered as needed

PM_WO_310 Components v416 Enter Components Type the Order number and Press Enter

PM_WO_310 Components v417 Enter Components Click on the Components Tab

PM_WO_310 Components v418 Enter Components – Stock/Non-Stock Click on the Possible Entries icon to search The Material Search box will open

PM_WO_310 Components v419 Click on the Tab List icon Enter Components – Stock/Non-Stock Several search tabs may be useful for finding the component

PM_WO_310 Components v420 Enter the description or part of the description Click on the Continue icon Enter Components – Stock/Non-Stock

PM_WO_310 Components v421 Enter Components – Stock/Non-Stock Double-click on the needed material

PM_WO_310 Components v422 Enter the quantity required Enter Components – Stock/Non-Stock

PM_WO_310 Components v423 For both Stock and Non-Stock items, the UM (Unit of Measure), IC (Item Category), and SLoc (Storage Location) will default Enter Components – Stock/Non-Stock

PM_WO_310 Components v424 When you have finished adding Components, click on the Save icon Enter Components – Stock/Non-Stock

PM_WO_310 Components v425 Non-File Materials  Parts which are used less frequently, do NOT have IRIS material numbers, and are ordered as needed

PM_WO_310 Components v426 Enter Components – Non-File Click in the Description field and enter a description of the needed material

PM_WO_310 Components v427 Enter the quantity of components, unit of measurement, and the item category (N for Non-stock). The SLoc (storage location) for the delivery will default to Central Stores Enter Components – Non-File

PM_WO_310 Components v428 Press Enter or click on the Continue icon Enter Components – Non-File

PM_WO_310 Components v429 When the boxes appear, click on the Continue icon in the first box to close it Enter Components – Non-File

PM_WO_310 Components v430 Requirement Quantity – defaults from what was entered on the Components tab Price – estimate of the cost Material Group – PM for PM Non-Material Master Material, PM for PM Non-Material Master Service Enter Components – Non-File

PM_WO_310 Components v431 For Services – Enter PM in the Material Group field Enter Components – Non-File

PM_WO_310 Components v432 Purchasing Group – will default to 000/UK00 (000 = Work Order / UK00 = Purchasing Enter Components – Non-File

PM_WO_310 Components v433 Goods Recipient – who receives the goods Requisitioner – who is requesting Unloading Point – where goods are delivered Vendor Material Number – plus additional description of the material (model, size, color, etc.) Enter Components – Non-File

PM_WO_310 Components v434 Click in the Vendor field, then click on the Possible Entries icon Find Vendors – Non-File

PM_WO_310 Components v435 Click on the Tab List icon in the upper- right corner Find Vendors – Non-File

PM_WO_310 Components v436 Click on UK Vendor Search Find Vendors – Non-File

PM_WO_310 Components v437 Enter the name or part of the name for the Vendor You can use wildcards (*) in your search Click on the Continue icon Enter Components – Non-File

PM_WO_310 Components v438 Double-click on the Vendor’s name Find Vendors – Non-File

PM_WO_310 Components v439 Find Vendors – Non-File Click on the Continue icon

PM_WO_310 Components v440 Vendor Master Data A vendor master data is maintained in the IRIS system If a desired vendor is not found in the database the department should do the following:  Download the UK Vendor Form located at or from UK’s forms page  Submit to desired vendor for completion  Fax or mail the completed form to Purchasing Once this form is received, Purchasing will create the vendor information in IRIS

PM_WO_310 Components v441 Non-File Components If you accidentally close the Non-File component detail box before you entered all the necessary information, click on the Select icon to the left of the component

PM_WO_310 Components v442 Non-File Components Click on the Purchasing button

PM_WO_310 Components v443 Non-File Components You can enter the missing details

PM_WO_310 Components v444 Non-File Components When you are finished, click on the Back icon to return to the Components tab

PM_WO_310 Components v445 Summary Maintenance Process Components Process Stock, Non-Stock, and Non-File materials Enter Requests/Requisitions for Materials/Services Find Vendors

PM_WO_310 Components v446 Unit 2 Editing Components

PM_WO_310 Components v447 Unit 2- Editing Components Change requests/requisitions for materials/services Cancel requests/requisitions for materials/services

PM_WO_310 Components v448 To Change a component:  Pull up the work order  Go to the Components Tab Change Components

PM_WO_310 Components v449 Change Components Notice that the Stock and Non-stock components are grayed-out which means they cannot be changed by selecting a new component; you can change the quantity and Unit of Measure.

PM_WO_310 Components v450 Change Components For the Non-File Component, you can change any of the information

PM_WO_310 Components v451 Change Components To change the description of a Stock or Non-Stock component, click on the Select icon to the left of the component

PM_WO_310 Components v452 Change Components At the bottom of the screen, click on the Delete Row icon When the Confirm. box appears, click on Yes

PM_WO_310 Components v453 Change Components To add the new component, click on the Possible Entries icon to search for it The Material Search box will open

PM_WO_310 Components v454 Enter the description or part of the description Click on the Continue icon Enter Components – Stock/Non-Stock

PM_WO_310 Components v455 Enter Components – Stock/Non-Stock When the list appears, double-click on the item

PM_WO_310 Components v456 Change Components Press Enter and the new component will be added

PM_WO_310 Components v457 To cancel a component:  Pull up the work order  Go to the Components Tab Cancel Components

PM_WO_310 Components v458 Cancel Components To cancel a component, click on the Select icon to the left of the component

PM_WO_310 Components v459 Cancel Components At the bottom of the screen, click on the Delete Row icon When the Confirm. box appears, click on Yes

PM_WO_310 Components v460 Summary Change requests/requisitions for materials/services Cancel requests/requisitions for materials/services

PM_WO_310 Components v461 Unit 3 Documents And Approvals

PM_WO_310 Components v462 Unit 3- Documents and Approvals Entering item long text Attaching supporting documents Release approvals

PM_WO_310 Components v463 Enter Item Long Text Comments about the Line Item can be entered in the Long Text area, which will print on the purchase order Click on the Create Text icon

PM_WO_310 Components v464 Enter Item Long Text Enter detailed information about the line item in this field. This can be used for all Material Management numbers & for Non-File items Word documents can be directly cut and pasted to this section

PM_WO_310 Components v465 Enter Item Long Text Click on the Back icon to close the Long Text window

PM_WO_310 Components v466 Attaching Supporting Documents Supporting Documents can include:  Certificates of insurance  Drawings  Warranties  Quotes

PM_WO_310 Components v467 Attaching Supporting Documents To attach a document, click on the Services for Objects icon

PM_WO_310 Components v468 Attaching Supporting Documents Click on the Select icon to the left of Maintenance Order Click on the Enter icon

PM_WO_310 Components v469 Attaching Supporting Documents Follow the menu and click on Create Attachment to immediately create the attachment

PM_WO_310 Components v470 Attaching Supporting Documents In the Look In: field, find the document folder on your computer Double-click on the file name and the file will be attached immediately to the work order

PM_WO_310 Components v471 Attaching Supporting Documents To view the attachment, click on the Services for Objects icon

PM_WO_310 Components v472 Attaching Supporting Documents Click on the Select icon to the left of Maintenance Order Click on the Enter icon

PM_WO_310 Components v473 Attaching Supporting Documents Click on Attachment List Note: When the Attachment List is in BOLD, a document is attached

PM_WO_310 Components v474 Attaching Supporting Documents Double-click on the attachment to open it

PM_WO_310 Components v475 Attaching Supporting Documents Click on the Close icon to close the document

PM_WO_310 Components v476 Release Approvals Needed for over $10,000 per line item  Follows normal approval process through the business officer

PM_WO_310 Components v477 Summary Entering item long text Attaching supporting documents Release approvals

PM_WO_310 Components v478 Course Summary Understand the PM components process through the work order Enter requests for materials through the work order Enter requests for services through the work order Change components on work order Cancel components on work order Attach documents to a work order