104-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice HP Blade Workstation Management Tools Summer 07 Update © 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice Speaker Name: Ron Norman Date: July, 2007

204-JAN-2007 Agenda iLO Advanced Feature Now Supported Insight Control for Blades Soon to be Supported Rapid Deployment Pack Enhanced Support Other Tools and Utilities Now supported

304-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice iLO Advanced - Key Features

404-JAN-2007 iLO 2 Features Shared Remote Console (Firmware version 1.30 or greater) Up to four iLO 2 users with remote console privileges in different locations can collaborate using the shared remote console to troubleshoot, maintain and administer remote servers.

504-JAN-2007 iLO 2 Features Console Replay (Firmware version 1.30 or greater) iLO 2 Console Replay captures and stores for replay the console video during: 1.a server's last major fault 2.Last Boot sequence. 3.Record Session

604-JAN-2007 iLO 2 Features Virtual Media The USB-based Virtual Media feature allows an IT administrator to boot the remote server using a standard 1.44-MB diskette, CD ROM, DVD+R or USB flash drive on a client PC or from a floppy diskette, CD or DVD image stored on a virtual media server on the network. **New** Virtual Folder

704-JAN-2007 iLO 2 Features Power Regulator Reporting (Firmware version 1.10 or greater) Both iLO 2 Select and iLO 2 Advanced enable access to power related data from any of the three iLO 2 interfaces (browser, script or command line) on supported server models. Available information includes time spent in Power Regulator Dynamic Savings mode and average, peak and minimum power consumption over 24 hour intervals.

804-JAN-2007 iLO Advanced Features Directory Services Integration Integrated Lights-Out 2 integrates with enterprise-class directory services to provide secure, scalable, and cost effective user management. Single Sign-On iLO 2 users can automatically login to iLO 2 from HP System Insight Manager (version 5.1 or greater) and the HP BladeSystem Onboard Administrator. Multi-factor authentication (Firmware version 1.10 or greater) Integrated Lights-Out 2 provides strong user authentication with two-factor authentication using digital certificates embedded on smartcards or USB flash drives. Terminal Services Integration (iLO 2 Advanced Only) (Coming Soon) Integrated Lights Out integrates with Microsoft Terminal Services to provide a high performance graphical remote console by automatically or manually switching to Microsoft Terminal Services when the operating system is fully loaded and available on the host system.

904-JAN-2007 iLO Feature/License Comparison

1004-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice New Support for Insight Control for Blades (ICE-BL) Coming in Oct/Nov Release of ICE-BL

11 What is the Insight Control Environment? Rapid Deployment Performance Mgmt. Virtualization Mgmt. Power Mgmt. Remote Mgmt. Embedded Intelligent Infrastructure HP SIM Management Foundation ProLiant Essentials Software Options Insight Control Unified Infrastructure Management Tuned for ProLiant and BladeSystem

Jun e – HP Res trict ed12 Insight Control Delivery Insight Control Environment Monitoring Remote Control Performance Monitoring Power Management Deployment Vulnerability Scanning MLDL Insight Control Environment for BladeSystem Monitoring Remote Control Performance Monitoring Power Management Deployment Vulnerability Scanning Virtual Machine Mgmt BL iLO Power Management Pack Extend iLO2 with … Monitoring Advanced Remote Control Power Management MLDL New iLO Power Management Pack for BladeSystem Extend iLO2 with … Monitoring Advanced Remote Control Power Management BL New WS Blade

Closer Look at IC Suites 1304-JAN-2007 Not Supported on Blade Workstation

14 HP Systems Insight Manager 5.1 Central management services Unified server & Workstation Mgmt. Vulnerability & Patch Management Consolidated vulnerability scaning & patch management Blade System Integrated Manager Enclosure view of Blade systems Rapid Deployment Pack Remote/Automated system configuration & deployment Performance Management Pack Proactive performance management and bottleneck analysis HP Insight Control Environment Features Insight Power Manager Power Measurement, Regulation & Reporting

Insight Power Manager – Overview Understanding HP Power Regulator Power Regulator uses the processor p-states to change two key attributes that affect power consumption. 1. CPU frequency: Moving to a lower p-state causes the affected CPU to operate at a lower frequency. For example, a GHz processor might operate at 3.0 GHz in a lower p-state. 2. CPU voltage: Moving to a lower p-state causes the affected CPU to operate at a lower level of voltage. CPU operating at 1.4v at max p-state might operate at 1.2v in the min. p-state JAN-2007 HP Power Regulator is a hardware-level feature that enables ProLiant systems to save power - and thereby financial resources - by controlling the processor performance states (p-states) of the server CPUs. Insight Power Manager monitors and uses HP Power Regulator technology.

Insight Power Manager – Modes There are four modes in which Power Regulator can operate: HP Static Low Power Mode. −In this mode, Power Regulator sets the processors to the lowest supported power state and forces the CPUs to stay in that lowest state. This mode saves the maximum amount of resources, but it might affect the system performance if processor utilization stays at or above 75% utilization. HP Static High Performance Mode. − In this mode, Power Regulator sets the processors to the highest supported processor state and forces the CPUs to stay in that highest state. This mode ensures maximum performance, but it does not save any resources. This mode can be useful for creating a baseline of power consumption data without Power Regulator. HP Dynamic Power Savings Mode. −In this mode, Power Regulator sets the processors to the appropriate power level based on the utilization of each CPU core during the last 1/8 second. The CPU is set to the power saving processor p-state if the CPU is operating at a utilization level that can be completed at the slower CPU frequency. The CPU is set to the maximum performance processor p-state if the CPU is operating at a utilization level that requires the fastest CPU frequency. The point at which Power Regulator shifts from the minimum p-state to the maximum p-state varies based on the processor installed in the system. A GHz CPU that has a 3.0 GHz minimum p-state frequency switches modes at around 75% utilization. A 3.2 GHz CPU that has a 3.0 GHz minimum p-state frequency switches modes at around 88% utilization. It is the ratio of the maximum p-state compared to the minimum p-state, plus a small guard band, that determines the utilization at which the processor switches from minimum p-state to maximum p-state. OS Control Mode. −In this mode, Power Regulator configures the server to enable the operating system to control the processor 1604-JAN-2007

Insight Power Manager – Reporting 1704-JAN-2007

Insight Power Manager – Reporting 1804-JAN-2007

Vulnerability and Patch Management 1904-JAN-2007 Security Threat Avoidance Tech.

Vulnerability and Patch Management Reporting 2004-JAN-2007

Performance Management 2104-JAN-2007

Performance Management - Reporting 2204-JAN-2007

Performance Management - Reporting 2304-JAN-2007

2404-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice New Support for Rapid Deployment Pack RDP Coming in Release 3.6/3.7

RDP – Updated Support Current Support Simply system Imaging. Simple system Deployment. Added Support as of RDP 3.7 Using the Deployment Toolbox (Hardware WinPE Jobs Only) −Remote configuration of System BIOS, RAID, and iLO. −Added jobs for remotely switching video console mode. Use of sysprep to create images and deploy. Do not support any job that specifically call out Windows Server or Linux OS’s. Support for Altiris base features −Remote management features −Remote Installation feature 2504-JAN-2007

RDP – New Jobs 2604-JAN-2007

2704-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice Other Tools Now Supported

New Management Tool Support Smart Start Scripting Toolkit tools −For use configuring BIOS (Conrep), RAID(cpqacuxe), iLO (hponcfg, Included in RDP) iLO Configuration tools −iLO Configuration tool (hplocfg, Offline SSH) −iLO Online Configuration tool (hponcfg) 2804-JAN-2007

2904-JAN-2007 HP Restricted - Non Disclosure Required Prior To Announcement planned for 15-FEB Subject to change without notice Questions??