Abralon  Quality from start to finish

RESEARCH & DEVELOPMENT CENTRE

For surface structuring of: paints, primers, top coats, clear coats, composites and plastics Abralon® – When and How

Grain:Silicon carbide Bonding:Special resin Backing:Knitted fabric on foam Coating:Special Abralon® method Colour:Grey Grit range:180, 360, 500, , 2000, 4000 Abralon® – Technical Specification

Conventional abresive. Two dimensional closed structure. Abralon  Two and three dimensional open structure Non woven. Three dimensional open structure Abralon® – Leveling, Dirt Sensitivity

FLEXIBLE Edges, corners and contours are no longer a problem when sanding with Abralon  The flexibility can be extended by using an interface pad. Abralon®

SELFCLEANING Compression of foam backing makes water and air circulate round the grit. Swarf is transported from surface into the foam. Abralon®

Grit cuts deeper with conventional stiff backing. Grit bends back with Abralon  and makes an even scratch. Abralon® – Cutting Property

Topcoat Primer Deep V-scratches extends curing time U-scratches clear out solvents faster. Abralon® – Scratch Shapes

Royal P320Royal P320 + Abralon® 500 Abralon® – Scratch Shapes

Topcoat paint Filler / Primer Metal sheet Mechanical bond between layers of paint Abralon® – Scratch Form

Abralon 500 Abralon 1000 Abralon 2000 Abralon 4000 Abralon®

Good structuring properties on: - primers, after leveling - mattening of paint and clear before spraying - composites - dust enclosures - orange peels saves paint & gives deep luster saves repainting & time Abralon® – When and Why

Fast polishing properties on: - oxidized paints - removal of dirt - car wash marks - water spots - acid spots - gel coats - “korian” - cast marble - marble * Large areas fast Abralon® – When and Why