Proposed TDA Firmware Enhancements Feature Software version Release date 1. Digital Extra Device Port 1.1 Available with launch of KX-TDA30 Apr/May '04 for KX-TDA100/200 2. 2 cell station card (KX-TDA0141) 1.1 Available with launch of KX-TDA30 Apr/May '04 for KX-TDA100/200 3. IP Extension & Handset 2.0 Oct/Nov '04 for KX-TDA100/200 Jan/Feb '05 for KX-TDA30 4. Networking Enhancements 2.0 Oct/Nov '04 for KX-TDA100/200 5. CTI Enhancement 2.0 Oct/Nov '04 for KX-TDA100/200 6. Hotel Features 2.0 Oct/Nov '04 for KX-TDA100/200 Jan/Feb '05 for KX-TDA30
Initial Configuration TDA200 TDA100 March/2003 TDA30 March/2004 Port Max. Trunk TDA200 128 Extension TDA100 64 TDA30 12 28 (SLT 24+DPT 24) Initial Configuration CO Extension DHLC-4 (SLT 4 + DPT4)
Revised after Sales Conference to accommodate changes that were possible. This Ad will appear in Small Business Magazine. Note no further changes possible.
Revised after Sales Conference to accommodate changes that were possible. This Ad will appear in newspaper adverts. Note no further changes possible.
Final Version of BPR Advert. Note no further changes possible.
TDA30 - Doorphone (Max.1) - MSG (Max.2) - Ext.Caller ID (Max.1) - Echo chancel (Max.1) - DLC-4 (Max.1) - SLC-4 (Max.1) - BRI-2 (Max.3) - LCOT-4 (Max.3) Front S-11 S-10 S-4 S-7 S-9 S-3 S-6 S-8 S-2 S-5 S-1 DHLC-4 (Fixed) USB SD Card Holder RS232C Clear S/W Reset S/W MOH EPG
“ System Capacities Resources -1 Trunk - Max.12 = Analog 12 (Max.) + ISDN 6 ports (Max.) - IPGW : 1 x 4ch Extension Ports - D-PT : Max.24 = D-PT + A-PT + DSS + VM (D-PT) + CS (TDA0141) - SLT : Max.24 = SLT + VM (DTMF) Resources MOH Port Pager Port PC Console PC Phone Doorphone Door opener DISA Ports OGM CS PS VM Unit Port (Ch) MSG waiting Log. SMDR TDA30 1 2 24 4 32 8 28 4 (8ch) 128 100 TDA100/200 2 8 64/128 8/16 64/64 16/32 2/2 12 (24ch) 256 200 Resources Tenant TDA30/100/200 8 COS 64 Trunk group Ext. use group 32 PS ring group Call pick up group ICD-Group 64 (32 Ext./G) VM (DTMF) 2 (32 Ext./G) Queuing time table Idle Ext. Hunting-G 64 (16 Ext./G) Ext. Number digits 1-4 Call park area 100 Conference 3x10 or 8x4 Paging group
“ System Capacities Resources -2 Resources Verified user code TDA30/100/200 4 digits x 1000 Verified code PIN 10 digits x 1000 Special carrier code 16 digits x 20 Host access code 10 digits x 10/TRG DDI table 32 digits x 1000 Emergency dial 32 digits x 10 Quick dial 4 digits x 80 System speed dial Pick up dial 32 digits Redial ARS plan 16 Leading digit 16 digits x 1000 Excepted leading 16 digits x 200 ARS Carrier 10 TIE Routing Table 32 Leading digits 3 PBX Code 7 Resources Toll Restriction level TDA30/100/200 7 Denied Code 16 digits x 100 / level Exception Code Charge Rate 8 digits Denomination 3 Call Log (Outgoing) 100/Ext. Call Log (Incoming)
“ System Hardware Trunk Cards BRI-2 KX-TDA3280 - 2 Port ISDN BRI Card - CO/Extension (Programmable) - RJ-45 x 2 - Power failure port is supported. Max.3 LCOT-4 KX-TDA3180 - 4 Port Analogue CO Card - RJ-45 x 4 - Power failure port is supported. - Line polarity reverse detection - CPC is not supported. Caller ID Card KX-TDA3193 - Bell / ETSI / DTMF - Mounted on LCOT-4 Max.3 - 4ch IPGW Card - G729a/G723.1/G711 - T.38 : Not supported - Web programming (English) IPGW-4 KX-TDA3480 Max.1 Note : All cards for TDA30 are NOT hot swappable
“ System Hardware Extension Cards DLC-4 KX-TDA3171 - 4 Port D-PT Card - D-PT / DSS / CS / VM (D-PT) Max.1 DLC-8 KX-TDA3172 - 8 Port D-PT Card - D-PT / DSS / CS / VM (D-PT) Max.2 SLC-4 KX-TDA3173 - 4 Port SLT Card - 4 DTMF receiver - + 40V Line feed Max.1 SLC-8 KX-TDA3174 - 8 Port SLT Card - 8 DTMF receiver - + 40V Line feed Max.2 Note : Optional DHLC card is not provided. Note : All cards for TDA30 are NOT hot swappable
“ System Hardware Optional Cards 1/2 MSG-2 KX-TDA3191 - 2 Port Message/DISA Card - OGM Max.15min, 32messages Max.2 DPH-4 KX-TDA3161 - 4 Port Doorphone Card - Doorphone for T30865 - 4 Door Opener - 4 External Relay Output (Ver.1.1) - 4 External Sensor Input (Ver.1.1) Max.1 Echo-8 KX-TDA3166 - 8 Port Echo Cancelling Card Max.1 Note : All cards for TDA30 are NOT hot swappable
“ System Hardware Optional Cards 1/2 Ext. Caller ID KX-TDA3168 - Caller ID Signal Generation Card - Max. 8 SLT (4ports x 2resources) - FSK Signal V23/Bell202 - 1st Bell -- Caller ID -- 2nd Bell Max.1 RMT KX-TDA3196 - Analog Modem Card. - V.90 Support. Max.1 Note : All cards for TDA30 are NOT hot swappable Additional AC power adapter (it is the same as packed adapter) KX-A236 When the total number of PT (*) exceeds 4, or the total number of CS exceeds 4, an additional AC power adapter is required. * defined as A-PT, T72xx, T74xx, T75xx (except T7560/T7565) and all DSS Consoles. When a BRI card is configured as “internal ISDN” and feeds DC power. Max.1
“ System Hardware AC Adapter Selection AC Adapter Capability Supplied AC Adapter only: Max. 32 power units + Second Adapter: Max. 96 power units SLT T76xx & T7560/T7565 Other type DPT & APT CS TDA0141 ISDN Terminal Total units Second Adapter Power unit 4 4 1 AC Adapter Selection Sample 1 0-24 24 No 2 0-24 Max 4 Max 4 32 No 3 0-24 Over 4 - Yes 4 0-24 Over 4 - Yes 5 0-24 4 4 1 33 Yes 6 0-24 4 3 4 32 No 7 0-24 4 3 5 33 Yes 8 0-24 3 4 4 32 No 9 0-24 3 4 5 33 Yes
“ Maximum Cabling Distance ø0.4mm 500m ø0.5mm 720m (CAT5) ø0.6mm 830m - T76xx Series - T7550/T7565 ø0.4mm 140m ø0.5mm 229m (CAT5) ø0.6mm 360m - Other D-PT/A-PT - All DSS ø0.4mm 698m ø0.5mm 1128m (CAT5) ø0.6mm 1798m - SLT ø0.4mm 227m ø0.5mm 347m (CAT5) ø0.6mm 500m - TDA0141(CS) USB 5m Point to Point 1000m (CAT5) Point to Multi-Point 150m (CAT5) - ISDN Terminal ISDN S0 Bus 5m USB Terminal USB USB Terminal
“ System Comparison TDA30 & TDA100/200 Trunk Extension Other IPGW-4 PRI-30 BRI-8 BRI-4 CID (CO) CID/PAY8 E1 E&M LCOT-16 LCOT-8 LPR Card LCOT-4 BRI-2 TDA3480 - TDA3193 TDA30 TDA3180 TDA3280 TDA0480 TDA0290 TDA0288 TDA0284 TDA0193 TDA0189 TDA0188 TDA0184 TDA0181 TDA0180 TDA100/200 MSLC-16 SLC-16 DHLC-8 DLC-16 DLC-8 SLC-8 LPR Card TDA30 TDA100/200 DLC-4 SLC-4 CS I/F - TDA3172 TDA3174 TDA3171 TDA0175 TDA0174 TDA0170 TDA0172 TDA0171 TDA0173 TDA0144/0143 Other Ext. CID MSG RTM Card TDA3168 TDA3191 TDA3196 TDA30 - TDA0191 TDA0196 TDA100/200 CTI-LINK TDA0410 Echo DPH-2 DPH-4 OPB-3 TDA3166 TDA3162 TDA3161 TDA0166 TDA0162 TDA0161 TDA0190
“ Hardware Outline Front View - DLC-8 (Max.2) - SLC-8 (Max.2) - IPGW-4 (Max.1) - Doorphone (Max.1) - MSG (Max.2) - Ext.Caller ID (Max.1) - Echo chancel (Max.1) - DLC-4 (Max.1) - SLC-4 (Max.1) - BRI-2 (Max.3) - LCOT-4 (Max.3) S-11 S-10 S-4 S-7 S-9 S-3 S-6 S-8 S-2 S-5 S-1 DHLC-4 (Fixed) USB SD Card Holder RS232C Clear S/W Reset S/W MOH EPG
Hardware Outline Rear View Power S/W Battery Backup connector for KX-A228 AC Power Adapter Additional AC Power Adapter KX-A236
“ CO Line Configuration CO Trunk Without IPGW card CO/Ext IPGW BRI Analog Total Slot CO Trunk 01 - 02 03 04 05 06 07 BRI-2 - LCOT-4 4 8 12 08 09 10 CO Trunk With IPGW card 11 4 YES 12 16
“ Extension Configuration Built-in Line/Ext. Ext.-1 Ext.-2 SLT D-PT Slot Without DXDP With DXDP 01 4S/4D - 4 8 02 03 04 05 06 07 4S/4D SLC(S4) - SLC(S8) DLC(D8) 8 4 16 12 24 20 8 16 20 24 4 12 08 09 10 11 12 13 4S/4D DLC(D4) - SLC(S8) DLC(D8) 4 8 12 16 20 24 4 16 12 24 20 8
“ Digital Extra Device Port (Digital XDP)-1/3 - DPT on DPT without additional HW or SW - Easy installation for additional Extensions - One DHLC port can be used for three telephones (2 x D-PT + 1 x SLT) - One DLC port can be used for two telephones (2 x D-PT) DXDP-Master 2 Wires 2 Wires DXDP-Slave 4 Wires 2 Wires 4 Wires 2 Wires XDP DXDP-Master DXDP-Slave
“ Digital Extra Device Port (Digital XDP)-2/3 Connection & Extension Number Assignment DXDP-Slave DXDP-Master XDP DXDP-Master XDP DXDP-Slave
“ Digital Extra Device Port (Digital XDP)-3/3 NG DXDP-Master Condition-1 ø0.4mm Max. 500m ø0.5mm Max. 720m (CAT5) ø0.6mm Max. 830m DXDP-Slave ø0.4mm Max.40m ø0.5mm Max.50m (CAT5) ø0.6mm Max.60m Master Slave - T7625 - T7630 - T7633 - T7636 - T7665 Telephone Can be used - A-PT - T72xx - T74xx - T75xx DSS CS TVP Can not be used Condition-2 Condition-3 - OHCA function can not be used - T7601 (USB) can not be used (PC Phone / PC Console / PC Programming) Condition-4 NG
“ New DECT- CS (KX-TDA0141) - Specific CS I/F card is not needed. - A port on DHLC or DLC4/8 can used as the interface of KX-TDA0141. - Two Voice Path per a CS. - Functionality : The same as TDA0142 ø0.4mm 222m ø0.5mm 347m (CAT5) ø0.6mm 500m Max.4 CS : One AC adapter Max.8 CS : Two AC adapters - CS Port assignment is not needed The TDA30 automatically detects the connected CS.
“ Caller ID for SLT (KX-TDA0168) With the addition of the KX-TDA3168 the TDA30 provides CLIP information for single line telephones. Caller ID data KX-TDA0168 Resource assignment The KX-TDA3168 has 2 resources (4ports/resource=Total 8SLT), the resources assignment for SLT extension card is needed. TDA0168 DHLC SLC-4 SLC-8-1 1-4 SLC-8-1 5-8 SLC-8-2 1-4 SLC-8-2 5-8 2 resources
“ New IPGW Card (KX-TDA3480) - 4ch IPGW Card - G729a/G723.1/G711 - T.38 (FAX) mode is not supported (FAX = G711) - Web programming (English) - Interoperability with TDA0480: Incoming call, Outgoing call and CLIP only. - Interoperability with another manufacturers : Not guaranteed.
PC Programming Software “ PBX Features (Software) The TDA30 features are the same as TDA100/200 features. Except for; PAYTONE Detection (not available on TDA30) MWL (not available on TDA30) PRI / E1 / E&M (not available on TDA30) CTI Link Card (not available on TDA30) PC Programming Software - Almost the same as TDA100/200 PC programming software.