Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.

Slides:



Advertisements
Similar presentations
Course Material Overview of Process Safety Compliance with Standards
Advertisements

Course Material Overview of Process Safety Compliance with Standards
BASIC HAZARD AWARENESS “This material was produced under the grant SH SHO from the Occupational Safety and Health Administration, U.S. Department.
Bioethanol Hazards Flammability of Ethanol Corn Dust Fires & Explosion This material was produced under grant SH F-36 from the Occupational.
Unit 3: Rescue Equipment This material was produced under grant number SH from the Occupational Safety and Health Administration, U.S. Department.
Grinder Safety Applications in Agriculture Shops OSHA Standard(s) and Produced by Idaho State University Office of Workforce Training.
Module 2: General Working Conditions 2.2 Working Surfaces Susan Harwood Grant Number SH F-23.
Basic First Responder Training for Incidents Involving Grain Storage Handling Facilities Unit 4: Rescue Strategies This material was produced under grant.
Road Safety & Awareness Training Your “Right to Know” 29 CFR 1926 / DOT MUTCD This material was produced under grant number SH22297-SH1 from OSHA. It does.
Western Iowa Tech Community College Used with permission from Penn State Ag & Engineering This material was produced under a grant (SH F-19)
2. Compliance with Standards Process Safety Management for Bioethanol This material was produced under grant SH F-36 from the Occupational.
This material was produced under grant number SH F-51 from the Occupational Safety and Health Administration, U.S. Department of Labor. It.
1 Walking-Working Surfaces This material was produced under grant [SH20856SH0] from the Occupational Safety and Health Administration, U.S. Department.
HAZ COM An employer must assemble information on the hazards of the chemicals they use. (Most will get this data from their chemical suppliers who are.
OSHA Safety and Health Regulations Related to SPF Applications Module Three: Personal Protective Equipment.
1. Overview of Process Safety Bioethanol Process Safety Management for Biofuels This material was produced under grant SH F-36 from the Occupational.
Course Material Overview of Process Safety Compliance with Standards
Fall Protection Training (OSHA Program) 1 Introduction to OSHA This material was produced under grant number SH F-51 from the Occupational.
Unit 13: Handling, Storage and Disposal of Low Pressure SPF Products.
SHIPBREAKING Module 1: Introduction to Shipbreaking 1.3 Emergency Action Plans Susan Harwood Grant Number SH F-23.
Unit 8: Good Safety Practices to Consider When Using Two-Component Low Pressure Spray Polyurethane Foam.
1 Intro to OSHA. Susan Harwood Training Grant This material was produced under grant number SH SH0 from the Occupational Safety and Health Administration,
Material Handling Safety This material was produced under the grant SH SH1 from the Occupational Safety and Health Administration, U.S. Department.
This material was developed by Compacion Foundation Inc and The Hispanic Contractors Association de Tejas under Susan Harwood Grant Number SH SH0.
This material was produced under grant numbers SH F-17 from the Occupational Safety and Health administration, U.S. Dept. of Labor. It does not.
Module 2: General Working Conditions 2.5 Confined Space Entry Susan Harwood Grant Number SH F-23.
Safety Training Presentations
Effective Health and Safety Committees – Part Three This material was produced under the grant SH SHO from the Occupational Safety and Health Administration,
Getting Green Building Automation. Why is Building Automation a Green Technology? There are programs starting all over the nation that focus on alternative.
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
OSHA Safety and Health Regulations Related to SPF Applications
An overview of the Occupational Safety and Health Act/Administration Offered by Farmworker Legal Services of New York, Inc. Through OSHA Susan Harwood.
Incident Command and Unified Command 1293 Airport Road Beaver, WV Phone: (304) Fax: (304)
Remaining Course Material 1.Overview of Process Safety 2.Compliance with standards 3.Process Hazard Analysis 4.Standard Operating Procedures 5.Safe work.
SAFETY AND HEALTH PROGRAMS 1. This presentation is adapted from the OSHA Safety and Health Programs presentation available on the OSHA website. CREDITS.
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
Flowing Grain Dangers Sponsors: Indiana Grain and Feed Association ISDA Indiana Corn Marketing Council Indiana Soybean Alliance Indiana Rural Safety and.
1 WELCOME TO Electrical Safety Arc Flash/Blast Injury Prevention Management/Supervisory Course.
Unit 2: Hazard Communication Safety Data Sheet (SDS) and Warning Labels.
This material was produced under grant number SH F-51 from the Occupational Safety and Health Administration, U.S. Department of Labor. It.
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
Module 5: Fire Protection 5.1 Fire Response Susan Harwood Grant Number SH F-23.
DOWN TO ZERODOWN TO ZERO Down To Zero ̶ Eliminate Falls/Save Lives State Building & Construction Trades Council of California, AFL-CIO Funded by Federal.
1 Welding Module DISCLAIMER This material was produced under grant number SH from the Occupational Safety and Health Administration, U.S.
1 Hispanic Contractors Association de San Antonio Fall Protection in the Construction Industry Fall Protection for the Construction Industry Train the.
Introduction to the Course MODULE 1. 2©2006 TEEX Course goal  Upon the successful completion of this course, participants will be able to identify the.
Campus Hazards This material was produced under grant number SH F-11 from the Occupational Safety and Health Administration, U.S. Department.
11 Walking-Working Surfaces Avoiding Slips, Trips and Falls Material is OSHA Compliant, Reviewed and Approved This material was produced under grant SH F-6.
Walking and Working Surfaces
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.
OSHA NOTICE & DISCLAIMER “This material was produced under grant SH20866SH0 from the Occupational Safety and Health Administration, U.S. Department of.
Combustible Dust Preventing and Mitigating the Effects of Fire and Explosions Developed by Western Iowa Tech Community College This material was produced.
Productivity. PLANNING  The key concept behind Internal Traffic Control is PLANNING for worker safety.  ITCPs integrate other aspects of planning to.
Safety Training for the Focus Four Hazards in the Construction Industry.
Down To Zero ̶ Eliminate Falls/Save Lives
Basic First Responder Training For Incidents Involving Grain Storage and Handling Facilities Introduction – Pre-Testing – Training Overview Developed by:
Module 5: Operations & Hot Work 5.3 Hot Work, Permits, and Inspections Susan Harwood Grant Number SH F-23.
Unit 12: Responding to Emergencies When Using Two-Component Low Pressure SPF.
OSHA NOTICE & DISCLAIMER “This material was produced under grant SH20866SH0 from the Occupational Safety and Health Administration, U.S. Department of.
1 Electricity. This material was produced under grant number SH F-54 from the Occupational Safety and Health Administration, U.S. Department.
This material was produced under grant number SH F-37 from the Occupational Safety and Health Administration, U.S. Department of Labor. It.
Job Hazard Analysis (JHA) Training for Safety and Health Staff
Emergency Operations Planning
Basic First Responder Training for Incidents Involving Grain Storage and Handling Facilities Unit 5– Introduction to Demonstrations and Hands On Training.
Shipyard Machinery and Power Tool Safety
Effective Health and Safety Committees – Part Two
Big Four Construction Hazards: Fall Hazards
Presentation transcript:

Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material was produced under grant SH23575SH2 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsements by the U.S. Government.

The demonstrations and hands-on activities conducted during this session are designed to enhance familiarity with basic grain storage and handling facilities; to demonstrate, and provide experience using emergency grain bin emptying techniques and grain containment devices; and to review various rescue strategies in a real world setting. 2

1.Tour of “typical” grain storage and handling facility 2.Work Station #1 – Tour inside of typical grain storage structure (Lockout/Tagout/Augers) 3.Workstation #2 – Demonstration of emergency bin emptying techniques (panel cutting demonstration) 4.Workstation #3 – Use of grain containment devices (rescue tubes) 5.Questions and answers 6.Post-test and class evaluation 3

Look for:  Size of structure including height and volume  Location of access points and ladders  Location of controls  Types of grain handling equipment in use  Location of overhead power lines  Types of nearby structures  Presence of LP gas storage tanks  Locations to position rescue vehicles  Natural boundaries to establish perimeter to secure site  Identify obvious first responder hazards 4

Look for:  access points and ladders  size of access doors  level of lighting inside  types of augers involved  size and location of floor wells  potential anchor points  location of controls/lockout/tagout sites  internal temperature  working platform on roof 5

Consider:  manner in which panels are assembled to form a round circle  thickness, design and coatings used on bin panels  types of cutting tools available  hazards associated with each type of cutting equipment  types of personal protective equipment needed  need for a charged line  need to maintain structural integrity 6

Consider:  Characteristics of free flowing grain  Why grain containment devices are needed  Alternative means of grain containment  Advantages and disadvantages of different grain containment devices  The role of a vacuum unit while using a grain containment device  The hazards involved in using a grain containment device 7

 Questions and Answers  Completion of post-test  Completion of workshop evaluation  Distribution of certificates of completion 8

9