New products at HF R.Adelberg 2009 Hongfa Europe GmbH

A. Signal relays HFD4 C. Safety relays HFD31 HFA2 HFA4 B. Power relays HF3FA HF152F – double pin HF7FD – double pin HF32FA-G HF46FA-G HF49FD HF115FD HF115FP HF118F reflow HF118F 136 HF14FW 136 HF18FA C. Safety relays HFA2 HFA4 HFA6 D. Latching relays HFE20 HFE23 E. SSR HFS32 SSR Hongfa Europe GmbH

HFD4 Samples & Serie now SMD samples June 2009 Axicom IM Omron G6K PANASONIC AGQ SMT = sureface mounting technology (reflow soldering) DIP = DIP terminations ( wave soldering) Hongfa Europe GmbH

HFD4 Hongfa Europe GmbH

HFD4 FCC part 68 = Federal Communications Commission part 68: This rules are to avoid any dangerous situation based on electrical hazards. For the relays means this - surge withstand voltage : 10 x 160µs means = 10µs is the slew rate (Anstiegssteilheit) and 160µs is the duration time Hongfa Europe GmbH

HFD4 Hongfa Europe GmbH

HFD4 Hongfa Europe GmbH

HFD4 Typ. application Communications equipment Linecard application – analog.ISDN , xDSL Voice over IP Office and business equipment Measurment and control equipment Consumer electronics Medical equipment Hongfa Europe GmbH

2. HFD31 Samples & Serie since July 09 Panasonic TQ2 Fujitsu A Serie Zettler AZ850/851 Omron G6H, TYCO FP2 Hongfa Europe GmbH

HFD31 Hongfa Europe GmbH

HFD31 Hongfa Europe GmbH

HFD31 Hongfa Europe GmbH

HFD31 Typ. application Communications equipment Linecard application – analog.ISDN , xDSL Voice over IP Office and business equipment Measurment and control equipment Consumer electronics Medical equipment Hongfa Europe GmbH

3. HF3FA samples and series since last year VDE and cULus approved to replace HF3FD GWFI / GWIT / GWT acc. EN60335/VDE0700 Hongfa Europe GmbH

Hongfa Europe GmbH

Lay-out HF3FA Hongfa Europe GmbH

Comparision between HF3FA and HF3FD HF3FA – HF3FD Hongfa Europe GmbH

HF3FA typ. applications white goods door opener coffee maker motion sensor water boiler etc. Hongfa Europe GmbH

4. HF152F double pin version sometime it is to hot at 16A 250VAC +105°C to avoid heating problems on the pcb Hongfa is the first supplier which can offer this kind of pinning VDE and UL approved samples and serie since September 2008 Standard pinning double pinning Hongfa Europe GmbH

HF15F-T Doppelpin Typenbezeichnung Hongfa Europe GmbH

Lay-out HF152F Doppelpin version Hongfa Europe GmbH

HF152F Doppelpin version Temp.rise comparison test single and double pin version at: 16A 105°C after 2hours: Movable spring pin Stat.spring pin HF152F-T Single pin version 20K 28K Double pin version 15K Result: the temp.rise is much lower than with single pin!! Hongfa Europe GmbH

HF152F Doppelpin version typ. applications: white goods refrigerator compressor relay washer heating relay oven heating zone relay light and building controls actor proximity switch (Näherungsschalter) door opener etc. Hongfa Europe GmbH

5. HF7FD double pin version to avoid heating problems on the pcb more safety for the soldering connection relay - pcb Hongfa is the first supplier which can offer this kind of pinning VDE and UL approved samples and serie since Juni 2009 HF7FD double pin is approved at VDE with: 12A / 250VAC +70°C 100k cycles ! Hongfa Europe GmbH

F7FD double pin version Hongfa Europe GmbH

Lay-out HF7FD Doppelpin version Hongfa Europe GmbH

HF7FD doublelpin version typ. applications: white goods refrigerator compressor relay washer heating relay oven heating zone relay light and building controls actor proximity switch (Näherungsschalter) door opener etc. Hongfa Europe GmbH

6. HF32FA-G Samples and serie since November 2008 VDE approved UL expected September 2009 Ambient temperature: -40-+85°C Out line dimensions: 17,6 x 10,1 x 12,3 mm Coil power: 200mW 1 NO Dielectric strength Coil-contact : 5000VAC Switching power :2500VA Contact material: AgSnO Hongfa Europe GmbH

Cross reference Electrical endurance TAKAMISAWA : JV OEG : OJ /OJE – keine 10A P&B : T77 – keine 10A 10A 250VAC resistive load roomtemperature: 70k cycles 1000W lamp load roomtemperature : 30k cycles TV5 rating acc UL B300 / R300 acc.UL Hongfa Europe GmbH

HF32FA-G is always with AgSnO contact material – no other contact material is available ! Hongfa Europe GmbH

Hongfa Europe GmbH

HF32FD-G typ. applications: PLC (programmable logic controller - SPS speicherprogrammierbare Steuerung) out-put cards light and building controls lighting for warning and information signs shutter motor relay door opener etc. Hongfa Europe GmbH

7. HF46F / HF46F-G Samples and serie since November 2008 VDE and CUR approved Replacement type for HF43F OMRON G5NB Panasonic LD Hongfa Europe GmbH

Hongfa Europe GmbH

Hongfa Europe GmbH

Safety approval HF46F HF46F-G Hongfa Europe GmbH

HF46F/46-G with 2 kings of different pinnings: Panasonic LD / OMRON G5NB and Tyco PCJ Hongfa Europe GmbH

HF46F/46-G with 2 kings of different pinnings: OMRON G5T Hongfa Europe GmbH

HF46F/46F-G typ. applications: white goods washer door locking / inside light light and building controls lighting for warning and information signs shutter motor relay door opener industry control systems etc. Hongfa Europe GmbH

Comparison between HF43F – HF46F Hongfa Europe GmbH

8. HF49FD Features: Both single contact version and bifurcated contact version are available Max. switching capability of contact: 5A Dielectric strength between contact and coil: 3kV High sensitive coil: 0.12W Two versions of terminal placement, compatible for both HF49F and HF49FA Socket available Environmental friendly products, compliant to RoHS Cross Reference: Panasonic PA, OMRON G6DS, OEG PCN (20.0×5.0×12.5) mm Hongfa Europe GmbH

Contact pin distance: 5,08 = PANASONIC PA or OMRON G6DS 7,62 = TYCO PCN Hongfa Europe GmbH

HF49FD pcb lay-out HF49FA HF49F Hongfa Europe GmbH

9. HF115FD – low cost HF115F Samples and serie since November 2008 VDE and CUR approved No sealed version AgSnO and AgNi contact material available Hongfa Europe GmbH

5. HF115FD – low cost HF115F Hongfa Europe GmbH

Comparison HF115FD – HF115F HF115FD – HF115F Hongfa Europe GmbH

10. HF115FP – with LED and manual tab Samples and serie since November 2008 VDE and CUR approved No sealed version AgSnO and AgNi contact material available Suitable for pcb or DIN rail sockets Hongfa Europe GmbH

Hongfa Europe GmbH

HF115FP advantage Manual tab with slot for metall retainer – tab is useable on the pcb socket too DC version with LED and protection diode (bipolare LED – means connection direction is arbitrary) AC version with LED For pcb- and DIN rail sockets Hongfa Europe GmbH

HF115FP advantage Manual tab with slot for metall retainer – tab is useable on the pcb socket too Hongfa Europe GmbH

HF115FP typ. applications: switch cabinets I/O moduls light and building controls lighting for warning and information signs shutter motor relay door opener industry control systems etc. Hongfa Europe GmbH

11. HF118F (253) reflow version (THT) Samples and serie since December 2008 VDE and CUR No sealed version AgSnO and AgNi contact material available Packaging real and tape available 8A 250VAC +85°C 50k cycles Hongfa Europe GmbH

HF118F (253) reflow version Hongfa Europe GmbH

HF118F (253) reflow version Packaging real and tape available Hongfa Europe GmbH

HF118F (253) reflow version Pre heating phase Hongfa Europe GmbH

Advantage: only reflow soldering process – save time and money HF118F (253) reflow version Advantage: only reflow soldering process – save time and money Disadvantage: Relay is more expensive Hongfa Europe GmbH

13. HF118F (136) low cost version Samples and serie since December 2008 VDE and CUR pending No sealed version AgSnO and AgNi contact material available 8A 250VAC +85°C 50k cycles Hongfa Europe GmbH

Hongfa Europe GmbH

Hongfa Europe GmbH

Comparison HF118F 136 – HF118F HF118F 136 – HF118F Hongfa Europe GmbH

14. HF14FW 136 Features: 20A switching capability TV-10 load 1.5mm contact distance is available 4kV dielectric strength(between coil and contacts) Sockets available Environmental friendly products, compliant to RoHS Application: UPS, Power, home appliance, industrial control Cross Reference: Omron G2R, TYCO OMI, FUJISTU FBR610, Panasonic JR1, Songchuan 793 (29.0×13.0×26.5) mm Hongfa Europe GmbH

15. HF18FA Features: 2 and 4 form C configurations High load (2Z: 10A 30VDC/250VAC 4Z: 6A 30VDC/250VAC) Surge withstand up to 2500V Various terminals available Environmental friendly products, compliant to RoHS Application: The product widely apply to industrial automation equipment, machinery equipment and other industrial control equipment. Cross Reference: Omron MY, Finder 55, TYCO PT (21.5×28×35) mm Hongfa Europe GmbH

Hongfa Europe GmbH

16. HFA2 / HFA4 / HFA6 Samples 2 pol IIIQ. 2009 serie end 2009 Samples 4 pol IIIQ. 2010 serie end 2010 Samples 6 pol IIIQ. 2011 serie end 2011 Features of HFA2 2 pole with either 1NO+1NC or 2CO contacts Forcibly guided contacts according to EN50205 10kV surge resistance among coils and contacts 6kV surge resistance (between poles) 6A 250VAC Res. Load, 3A 250VAC,AC-15 load Environmental friendly products, compliant to RoHS Application: This product widely apply to elevator and escalator control, Emergency shut-off, machine control, light barrier, could also use in the process of automotive making , industrial automatic control device, security and protection system and etc. Cross Reference: TYCO SR2M, HENGSTLER K-RBS, DOLD OA5669, ELESTA SIR282 (29×12.6×25.5) mm Hongfa Europe GmbH

4 pole with either 2NO+2NC or 3NO+1NC contacts Features of HFA4 4 pole with either 2NO+2NC or 3NO+1NC contacts Forcibly guided contacts according to EN50205 10kV surge resistance among coils and contacts High shock resistance (Functional:200m/s2) Low operating power(360mW rate coil power) 6A 250VAC Res. Load, 2A 250VAC, AC-15 load Environmental friendly products, compliant to RoHS Application: This product widely apply to elevator and escalator control, Emergency shut-off, machine control, light barrier, could also use in the process of automotive machine tools , industrial automatic control device, security and protection system and etc. Cross Reference: Omron G7SA, Panasonic SFS, IDEC RF1V, ELESTA SIR 4 contacts, TYCO SR4D (40×13×24) mm Hongfa Europe GmbH

- forcibly guided contacts (zwangsgeführte Kontakte) Saftey relays are relays with special requirements acc. EN 50205 and ZH1/457 (ZH = Zweihandsteuerungen für Pressen) like: - forcibly guided contacts (zwangsgeführte Kontakte) - must have min. 1NO and 1NC - contact gap must be never less 0,5mm over the hole life time of the safety relays – not only under normal operating conditions, but also when a fault occurs - NC + NO can never simultanously in the closed position Hongfa Europe GmbH

Safety relay typ. application: safety control circuits: Hongfa Europe GmbH

17. HFE20 – compare with RTx3T Samples mid. of 2009 serie end 2009 Optinal pre-make contact tungsten (W) Optional manual tab in preparation Inrush current till165A 20msec 5kV / 10mm creepage + clearance Monostable 400mW and/or latching 1 or 2 coils Hongfa Europe GmbH

Hongfa Europe GmbH

Hongfa Europe GmbH

What is a pre-make contact ? Twin contact electrically connected where one contact always closes first (pre-make) and opens last. The pre-make contact, for example out of tungsten (high resistive and very resistant to contact erosion), switches the current, while the second, like a low resistive silver contact, carries the load. Pre-make contact is tungsten W and second contact is AgSnO Hongfa Europe GmbH

What is a pre-make contact ? Pre-make absorb the inrush current ! Hongfa Europe GmbH

ripple control receiver (Rundsteuerempfänger) etc. Cross reference - Tyco RTx3T Typ.application building controls actors ripple control receiver (Rundsteuerempfänger) etc. Hongfa Europe GmbH

18. HFE21 Samples mid. of 2009 serie end 2009 120A 250VAC max 440VAC Two different kinds of terminal latching 1 or 2 coils Gruner This are short circuit requirements ! Hongfa Europe GmbH

For example UC3-1 = Hongfa Europe GmbH

HFE21 typ. application: - electr. meter application At the moment a lot of countries changed from electromechanical induction meter to solid state meters. Hongfa Europe GmbH

Solid state meters advantage: HFE21 typ. application: Solid state meters advantage: Some newer electricity meters are solid state and display the power used on an LCD, while newer electronic meters can be read automatically. In addition to measuring electricity used, solid state meters can also record other parameters of the load and supply such as maximum demand, power factor and reactive power used etc. They can also include electronic clock mechanisms to compute a value, rather than an amount of electricity consumed, with the pricing varying by the time of day, day of week, and seasonally. It saves the cost of a human meter reader and the resulting mistakes, but it also allows more measurements, and remote provisioning. Many smart meters now include a switch to interrupt or restore service. Hongfa Europe GmbH

19. HFE23 Samples mid. 2009 serie end 2009 3 phase relay 3 x 120A 250VAC max 440VAC latching 2 coils Gruner 733 Hongfa Europe GmbH

20. HFS32 SSR - Samples now - 1 Form A SSR - Output current: vertical type 1 to 2Aa.c. horizontal type 3 to 5Ad.c. - Output voltage: 240/380 Va.c., 24/48 Vd.c Hongfa Europe GmbH

HFS32 types: Hongfa Type input output HFS32D/5D-24D3M-N 5VDC 3…33VDC / 3A HFS32D/24D-24D3M-N 24VDC HFS32D/60D-24D3M-N 60VDC HFS32D/5D-48D0R1T-N 3…48VDC / 100mA HFS32D/24D-48D0R1T-N HFS32D/60D-48D0R1T-N HFS32/5D-240A1Z-Y 24…253VAC / 1A HFS32/24D-240A1Z -Y HFS32/60D-240A1Z-Y HFS32D/5D-24D5M-NH 3…33VDC / 5A HFS32D/24D-24D5M-NH HFS32D/60D-24D5M-NH HFS32/5D-240A2ZH 24…253VAC / 2A HFS32/24D-240A2ZH HFS32/60D-240A2ZH Hongfa Europe GmbH

Cross Reference: Tyco V23109, Crydom CR Hongfa Europe GmbH

Sockets for HFS32: 14FF-2Z-A1 – pcb 14FF-2Z-C2 – DIN Rail Hongfa Europe GmbH

HFS32 typ. applications: switch cabinets I/O moduls light and building controls lighting for warning and information signs industry control systems medical equipments Hongfa Europe GmbH

With power to success ! Hongfa Europe GmbH