Centurion Scale “temporary install” The scale to be shown is a B-tek Centurion Scale “Flat top” design with a steel deck Platform is 84’x11’ mounted temporary in the parking lot Temporary gravel approaches and our door mounted indicator and printer with wireless transmission to a remote printer. The scale is a modular design with (3) - 24’ modules and (1) - 12’ module. Features: 100 % digital load cells that are in stainless steel cans. 75K load cells, (10) in the entire scale. 10” I-Beams with a 3/8” steel deck Very clean design with easy access to the components under the deck.. 5 year “End wall to End wall” Warranty

Layout of scale elevation Leveling of Bulk heads at each end of the scale Marking of the load plates

Preparing to set the scale Dummy cells mounted to the load plates, crane will set the scale. Scale is pre assembled laying on the ground to the left.

Scale Placement Scale has been placed on the dummy cells Excavated material has been placed behind bulk head for fill

Installation of load cells Shows gravel approaches installed Replacing the dummy load cells with the actual load cells

Completed Installation Scale installed, electronics mounted in the sealed box to the right of the scale. Good look at the 6’ retaining blocks holding the gravel in place.

Outdoor Electronics package Scale readout and printer mounted in a insulted enclosure with visor. Notice the box at the top of the pole is a data transmitter to a remote printer in the scale office.