950 Watts /1400 VA 120 and 230 Vac models Powerware P13 and P14 UPS 950 Watts /1400 VA 120 and 230 Vac models p13pres.ppt rev 02/21/06

Agenda Features and Benefits Applications Product Features Overview Software Out-of-Box Usability Collaterals

P13 and P14 Product Snapshot IBM Feature Code 9910-P13 9910-P14 IBM Part Number 39J2532 39J4810* Topology Line-interactive Line-interactive Power Rating 950 Watts/1400 VA 950 Watts/1400 VA Voltage 120 Vac 220-240 Vac Frequency 50/60 Hz 50/60 Hz Configuration Tower Tower Dimensions (HxWxD) 7.6 x 5.9 x 15.4 in 7.6 x 5.9 x 15.4 in Weight 37.0 lbs 37.0 lbs Input Connection 5-15P IEC-320-C14 Output Connection (6) 5-15R (6) IEC-320-C13 Battery Runtime (half/full) 14/5 min 14/5 min Color Black Black *RoHS compliant part number. Old IBM part number is 39J2533.

P13 and P14 Features and Benefits Cost-effective power protection for entry to mid-level servers Eliminates unwanted power quality surprises with Buck and Boost voltage regulation Single SKU supports i5-iSeries and p5-pSeries, OpenPower with both serial and relay cables included with UPS Minimizes downtime with hot-swappable batteries Tested and approved by IBM to assure out-of-box usability Includes premium IBM warranty which uniquely covers batteries, too

P13 and P14 Applications Cost-effective, entry-level power protection for: i5 and iSeries servers p5 and pSeries OpenPower servers

Application Matrix Expected IBM Server Watts Vac P13 P14 Runtime i5-iSeries 9406-520, 9405-520 600 100-127  10 9406-520, 9405-520 600 200-240  10 p5-pSeries and OpenPower 9111-520 600 100-127  10 9111-520 600 200-240  10 7028-6E4 p630 750 100-127  7 7028-6E4 p630 750 200-240  7 7029-6E3 p615 450 100-127  16 7029-6E3 P615 450 200-240  16

Series 5 Power Protection The Powerware 5115 delivers power protection from power problems that threaten your equipment and priceless data Power Failures Power sags Power surges Brownouts Overvoltage The Powerware 5115 also offers varying degrees of protection against other power problems as well

Advanced Battery Management (ABM®) Technology Increases battery service life by charging only when needed Optimizes recharge time Does not trickle charge & starve the electrolyte Microprocessor controlled – only true and automatic battery check (periodic, controlled discharge) for accurate advanced battery failure protection Sleep features – no unnecessary battery drain

Buck and Boost Voltage Regulation Wide input voltage window: regulates voltage fluctuations Regulated output voltage: prevents voltage fluctuations from reaching connected load Input Voltage to UPS Output Voltage to Load +20% +6% Nominal Voltage -10% -20%

Sine Wave Output When the UPS switches to battery power, it provides smooth sine wave output to the connected load

Hot-swappable Batteries Extends the service life of the UPS by allowing the user to replace batteries without shutting down the connected load

Battery Runtime (in minutes) Watts VA Runtime 128 200 58 192 300 41 320 500 28 402 600 19 503 750 14 603 900 10 670 1000 8 804 1200 6 938 1400 5

Simple, User-friendly Interface Start-On-Battery: Power up UPS in absence of utility power On/Off Power Alarm Silence/ Self-Test UPS Power On UPS On Battery Overload Service Indicator

P13 Rear Panel DIP Switches USB Port Network Transient Protector Site Wiring Fault Serial Port (6) 5-15R Input Overcurrent Protector 6-foot Line Cord w/5-15P

P14 Rear Panel USB Port DIP Switches Network Transient Protector Serial Port IEC-320, 10A Receptacles1 Input Overcurrent Protector IEC-320 Input Connector 1 P14 includes three (3) IEC-320-C13 to IEC-320-C14 1.8 m power cords

Site Wiring Fault Indicator (P13 model) UPS verifies that the wall socket to which it is connected is properly wired Red light illuminates to indicate a problem with the wall socket; either the ground wire connection does not exist or the line and neutral wires are reversed

Nominal Voltage Selection: DIP Switches Select nominal voltage by setting DIP switches Select 110 or 120V (default) for P13 Select 220, 230 (default), or 240V for P14

Network Transient Protector The P13 offers protection from disturbances that travel through the network (RJ45) and phone lines (RJ11)

USB and Serial Communication UPS is equipped with both USB and serial communication ports (cables for both are included) Serial Port USB Port Single SKU supports i5-iSeries and p5-pSeries systems

Powerware Software Suite The Powerware 5115 includes the exclusive Software Suite CD, incorporating the best power technology with all the control software you need for effective network monitoring and analysis, power management, SNMP and UPS remote shutdown. Software Suite Contents LanSafe CheckUPS Basic Advanced NetWatch PowerVision (30-day trial version) Software Installation Wizard Takes the guesswork out of UPS software installation Selects the right software for your system Links available for new downloads

LanSafe PowerScope View PowerScope view provides a crisp, real-time animation of the power flow through the UPS components Vital status and metering information is intuitively available at-a-glance The UPS component topology is automatically detected (line-interactive for P13 and P14)

PowerScope View Elements Toolbar Buttons Quick-launch most common tasks Animated UPS topology display LanSafe Controller name, location and UPS model Input Voltage Meter Output Voltage Meter Battery Run time Amount of time the UPS can operate on battery power Load % The percent of maximum output load the UPS supports. The number increases when new devices are plugged into the UPS Active Events Log Advanced Battery Management (ABM) animated status indicator Doubles battery life by charging only when necessary

Why Use LanSafe Software? 1. Prevent system crashes When a power failure outlasts the UPS battery run time, LanSafe automatically performs a graceful operating system shutdown. 2. Avoid data loss LanSafe saves all unsaved work-in-progress. 3. Protect valuable applications LanSafe protects applications from becoming corrupt by closing them in an orderly fashion. 4. Stay informed Monitor and receive UPS alarms via network broadcasts, SNMP, email, pager or mobile phone. 5. Control the power Manage all UPSs on the network, turn them on and off, check battery health, create sequential shutdown scenarios, integrate UPSs into SNMP Network Management Systems.

Powerware Extensions Software for IBM Director Seamless UPS and software integration into IBM Director Network Management System (NMS) Real time monitoring, management and alarm notification of all UPSs in the network: e.g. battery status, battery replacement, load level and metering information Automatically launches LanSafe and ConnectUPS Web/SNMP Card applications from within Director Available on Powerware web FREE-OF-CHARGE

P13 and P14 Out-of-Box Usability 9910 philosophy of a complete package UPS, power1 & communication cables, software, mounting hardware and manuals 1 P14 includes three (3) IEC-320-C13 to IEC-320-C14 1.8 m power cords

P13 and P14 Collateral Additional information available at www.powerware.com/ibm Select your region. Click “Products”, click “9910 Solutions” then click “Powerware pSeries” or “Powerware iSeries” Materials available Data sheet Application overview chart Product presentation Documents (manuals) Communication Options for IBM Applications