Office of Emergency Management Quick Start for the ICOM F3S - VHF Transceiver

On these Arlington County radios, the opening message upon “power-up” first displays the “unit number,” i.e. “ARLCo24.” Within a few seconds the unit starts a programmed scan sequence and the display will change to read “ARLCOVA.” * *

To STOP “power-on scan:” 1) Press the P2 button. 2) Check the channel display 3) Then use UP / DOWN Arrows (if needed) 4) Select “working channel” per COMPLAN Ch.NoFreq. RxDisplay TEXT A1PriOP A2AltOP A3BURpt B1ARPSC B2SIMP TYSONS FAIRFAX BLUMONT ARLARC ALEXARC W3DOSDC N3AGBDC MVARC MARINE16 2

Functions: Channel UP Channel DOWN MONITOR HIGH / LOW TX TALK-AROUND SCAN ON / OFF BANK UP 3 The front panel keys on Arlington County F3S radios are programmed to enable users to access these functions:

4 Functions - Continued :

5 B atteries

6 Battery Charging Use only the supplied Class 2 Wall transformer Input 120VAC 60Hz 9w - Output 12VDC 300mA Charge fully overnight for 8-10 hours.