ELEVATOR

PARTS FOR THE CAR PARTS FOR THE CAR ANGLE IRON-4X3X3/8 QTY- WT.-8.5LBS/FT LENGTH-6.5 FEET ANGLE IRON-4X3X3/8 QTY- WT.-8.5LBS/FT LENGTH-6.5 FEET ANGLE IRON-3.5X3X3/8 QTY-2 WT.-7.9LBS/FT LENGTH-6 FEET ANGLE IRON-3.5X3X3/8 QTY-2 WT.-7.9LBS/FT LENGTH-6 FEET ANGLE IRON-3.5X3X3/8 QTY-2 WT.-7.9LBS/FT LENGTH-8 FEET ANGLE IRON-3.5X3X3/8 QTY-2 WT.-7.9LBS/FT LENGTH-8 FEET I-BEAM W6X9 QTY-4 WT.-9LBS/FT LENGTH-5.25 FEET I-BEAM W6X9 QTY-4 WT.-9LBS/FT LENGTH-5.25 FEET I-BEAM W8X24 QTY-2 WT.-24LBS/FT LENGTH-8.5 FEET I-BEAM W8X24 QTY-2 WT.-24LBS/FT LENGTH-8.5 FEET I-BEAM W8X48 QTY-1 WT.-48LBS/FT LENGTH-9 FEET 4-INCHES I-BEAM W8X48 QTY-1 WT.-48LBS/FT LENGTH-9 FEET 4-INCHES EXPANDED METAL 48” X 72” QTY-2 WT LBS/EACH EXPANDED METAL 48” X 72” QTY-2 WT LBS/EACH EXPANDED METAL 48” X 96” QTY-1 WT LBS EXPANDED METAL 48” X 96” QTY-1 WT LBS RY-GRIPE PLATE 3/16X17 QTY-1 WT. 7.5LBS/FT LENGTH-8 FEET RY-GRIPE PLATE 3/16X17 QTY-1 WT. 7.5LBS/FT LENGTH-8 FEET GATE NO.6 QTY-1 WT.-60LBS LENGTH-8 FEET GATE NO.6 QTY-1 WT.-60LBS LENGTH-8 FEET RIGID STEEL WHEEL 6X3 QTY-8 RIGID STEEL WHEEL 6X3 QTY-8 PULLEYS 8” QTY-3 PULLEYS 8” QTY-3

THE ELEVATOR CAR CAR

THE ELEVATOR SIDE

THE ELEVATOR TOP

ANGLE IRON

THE GATE

THE RIGID WHEEL

THE PULLEY

PARTS FOR THE DRIVE TRAIN PARTS FOR THE DRIVE TRAIN BRAKE MOTOR BM233T QTY-1 15 HP RPM-1760 BRAKE MOTOR BM233T QTY-1 15 HP RPM-1760 SPEED REDUCER WORMGEAR QTY-1 30:1 RATIO SPEED REDUCER WORMGEAR QTY-1 30:1 RATIO WIRE ROPE DRUMS QTY-3 DIA. 11.5” LENGTH-16” WIRE ROPE DRUMS QTY-3 DIA. 11.5” LENGTH-16” CLAMP-ON COUPLINGS 5.5” X 8-5/8” QTY-2 CLAMP-ON COUPLINGS 5.5” X 8-5/8” QTY-2 DOUBLE LENGTH SEALED BEARINGS QTY-4 DOUBLE LENGTH SEALED BEARINGS QTY-4 HAND CRANK 10.5” LONG HAND CRANK 10.5” LONG WIRE ROPE QTY-3 LENGTH-150 FEET EACH WIRE ROPE QTY-3 LENGTH-150 FEET EACH STEEL SHAFT DIA.-2” QTY-9 LENGTH 4”-8” STEEL SHAFT DIA.-2” QTY-9 LENGTH 4”-8”

THE DRIVE TRAIN

THE MOTOR MOTOR

SPEED REDUCER/GEAR BOX

THE DRUM

CLAMP OR COUPLING FOR THE DRIVE TRAIN

THE BEARINGS

THE CRANK HANDLE

THE ELEVATOR FRAME THE ELEVATOR FRAME ANGLE IRON 8X8X1 QTY-8 LENGTH 14 FEET ANGLE IRON 8X8X1 QTY-8 LENGTH 14 FEET ANGLE IRON 8X8X1 QTY-4 LENGTH 12 FEET ANGLE IRON 8X8X1 QTY-4 LENGTH 12 FEET STEEL PLATE 16X5X.75 QTY-32 STEEL PLATE 16X5X.75 QTY-32 STEEL BOLTS 3.25X1 QTY-64 STEEL BOLTS 3.25X1 QTY-64 ANCHOR BOLT L-HOOK 1”-8 12” LONG QTY-16 ANCHOR BOLT L-HOOK 1”-8 12” LONG QTY-16 ANGLE IRON 8X8X1 QTY-8 LENGTH 8 INCHES ANGLE IRON 8X8X1 QTY-8 LENGTH 8 INCHES SHOCKS QTY-6 SHOCKS QTY-6 STEEL PLATE 6’X8’X1/4” STEEL PLATE 6’X8’X1/4” RUBBER PADS DIA 5” QTY-6 RUBBER PADS DIA 5” QTY-6 STEEL BARS 6”X10.5’ X.75 QTY-6 STEEL BARS 6”X10.5’ X.75 QTY-6 STEEL BARS 6”X7.5’X.75 QTY-6 STEEL BARS 6”X7.5’X.75 QTY-6 I-BEAM W8X48 LENGTH 9’-4” I-BEAM W8X48 LENGTH 9’-4”

ANGLE IRON

THE SHOCKS

THE MOUNTING FOR THE SHOCKS

STEEL PLATE

THE TOWER TOWER

PART OF THE FRAME SUPPORT FOR THE TOWER TOWER

THE LIMIT SWITCH

MAINTAINENCE SCHEDULE FREQUENCY AND THOROUGHNESS OF INSPECTION DEPEND UPON SUCH FACTORS : 1) THE IMPORTANCE OF THE MOTOR IN THE PRODUCTION SCHEME 2) THE PERCENTAGE OF THE DAYS THE MOTOR OPERATES 3) THE NATURE OF SERVICE 4) THE WINDING CONDITIONS WEEKLY INSPECTIONS INCLUDE: 1) THE SURROUNDINGS EX:( IF THE WIRING IS EXPOSED TO DRIPPING WATER) 2) THE LUBRICATION OF THE SLEEVE BEARING MOTORS 3) THE MECHANICAL CONDITION 4) THE BALL OR ROLLER BEARINGS 5) THE COMMUTATORS AND BRUSHES 6) THE ROTORS AND ARMATURES 7) THE WINDINGS 8) GENERAL INSPECTION. THIS IS A GOOD TIME TO CHECK THE BELTS, GEARS, COUPLINGS, ETC..

MAINTANCE SCHEDULE CONTINUED: MONTHLY OR BIMONTHLY INSPECTION INCLUDES: 1) THE WINDINGS FOR THINGS SUCH AS TIGHTNESS 2) THE BRUSHES 3) THE COMMUTATORS 4) THE BALL OR ROLLER BEARINGS 5) THE SLEAVE BEARINGS 6) THE ENCLOSED GEARS-CHECK OIL FLOW FOR PRESENCE OF THINGS SUCH AS METAL SCALE, SAND, OR WATER. SCALE, SAND, OR WATER. 7) CHECK LOADS FOR CHANGED CONDITIONS, BAD ADJUSTMENTS, POOR HANDLING, OR CONTROL. 8) CHECK THE COUPLINGS AND OTHER DRIVE DETAILS

MAINTANCE SCHEDULE CONTINUED ANNUAL OR BIANNUAL INSPECTION INCLUDES: 1) THE WINDINGS 2) THE AIR GAP AND BEARINGS 3) THE ROTORS 4) THE ARMATURES 5) THE LOADS PERIODIC CLEANING OF THE WIRES BY USING A STIFF BRUSH AND KEROSENE OR COMPRESSED AIR OR LIVE STEAM AND THEN RELUBRICATING WILL HELP TO LENGTHEN THE LIFE OF THE ROPE AND WILL REDUCE ABRASIONS AND WEAR ON THE SHEAVES AND THE DRUMS. PERIODIC CLEANING OF THE WIRES BY USING A STIFF BRUSH AND KEROSENE OR COMPRESSED AIR OR LIVE STEAM AND THEN RELUBRICATING WILL HELP TO LENGTHEN THE LIFE OF THE ROPE AND WILL REDUCE ABRASIONS AND WEAR ON THE SHEAVES AND THE DRUMS. NOTE: BEFORE STORING AFTER USE, THE WIRE ROPE SHOULD BE CLEANED AND LUBRICATED.

LUBRICATING OIL

THE END THE END