N airn A cademy

Desk Top Publishing The DTP example shown to the right is taken from the 2002 Higher Graphic Communication Paper, Question 6 and will be used to describe the terminology required for the course.

Desk Top Publishing  Page Layout The layout of the page in this example is Portrait Orientation. Portrait Landscape The height of the page is larger than the width of the page. If the page is wider than its height the layout is known as Landscape Orientation. Material asked in 2006 Higher paper Material asked in 2004 Higher paper Material asked in 1996 Higher paper

Desk Top Publishing  Page Layout The page shown includes a number of different parts to its layout. The word ‘DECO’ at the top of the page is called the HEADLINE (or Heading) The word ‘ORIGINS’ under the Heading is called the SUB-HEADING. The text is arranged into 2 COLUMNS. The page also includes a GRAPHIC Material asked in 2007 Higher paper Material asked in 2005 Higher paper Material asked in 2004 Higher paper Material asked in 2002 Higher paper Material asked in 2001 Higher paper Material asked in 1998 Higher paper Material asked in 1996 Higher paper Material asked in 1994 Higher paper

Desk Top Publishing  Page Layout Arranged round the text and graphics there are also other important parts of the publication. The area to the top of the publication above the header is called the TOP MARGIN The area below the text or graphics at the bottom of the page is called the BOTTOM MARGIN. The areas to the sides of the publication between the text or graphics and the edge of the page are called the SIDE MARGINS. The area between columns is called the GUTTER Material asked in 2006 Higher paper Material asked in 2005 Higher paper Material asked in 2004 Higher paper Material asked in 2002 Higher paper Material asked in 1998 Higher paper Material asked in 1996 Higher paper Material asked in 1994 Higher paper

Desk Top Publishing  Page Layout Other techniques can be used to add style and interest to the publication. Text which is white on a black or dark background is called a REVERSE. In this case it is used only for part of the Heading. The line separating the Heading from the rest of the document is called a RULE. If this is placed between columns it is called a COLUMN RULE. The text indicating the contents of the graphic is called a CAPTION. The text at the bottom of the page indicating the page number is called the FOLIO Material asked in 2007 Higher paper Material asked in 2005 Higher paper Material asked in 2004 Higher paper Material asked in 2003 Higher paper Material asked in 2002 Higher paper Material asked in 2001 Higher paper Material asked in 1998 Higher paper Material asked in 1996 Higher paper Material asked in 2006 Higher paper

Desk Top Publishing  Page Layout Other techniques can be used to show standard features which apply to all pages rather than being specific to one page only. Some documents will have a HEADER which usually gives information about the contents of the document or the company who own the document. Some documents will include a FOOTER which usually gives information about location of where document is saved, date, etc. NOTE: Footers DO NOT give the page number – This would be called a FOLIO Nairn Academy – Department of Technology C://my documents/higher graph com/DTP notes/terminology PPP.ppp Some documents will include a BACKGROUND or WATERMARK. An example of this is a company badge which appears on every page of the document or the company’s name Material asked in 2006 Higher paper Material asked in 1996 Higher paper Material asked in 1994 Higher paper

Desk Top Publishing  Page Layout Other techniques can be used to add style and interest to the publication. Some areas of the document may not have any content included. This area is called WHITE SPACE Other areas of the document may have a picture which does not fit into the column structure and reaches to the edge of the page. This is called a BLEED. Graphics used taken from ‘Design and Layout: Understanding and Using Graphics’ by David Dabner Material asked in 2004 Higher paper Material asked in 2003 Higher paper Material asked in 2001 Higher paper Material asked in 1997 Higher paper

Desk Top Publishing  Page Layout Page layout is important to try to draw attention to different parts of a document. The layout of elements on a page, or on facing pages can be done in two ways. If each of the pages has the same layout – either for text, graphics or both – and each page is a mirror image of each other - the layout is said to be SYMMETRICAL If each of the pages has the different layout and is not a mirror image of each other, the layout is said to be ASYMMETRICAL Graphics used taken from ‘Design and Layout: Understanding and Using Graphics’ by David Dabner Material asked in 2006 Higher paper Material asked in 1997 Higher paper

Desk Top Publishing  Font and Lettering Styles The looks of the publication can be affected by the types of font or lettering used. Fonts can be grouped into 3 distinct styles Desk Top Publishing SERIF fonts SANS SERIF fonts DECORATIVE fonts

Desk Top Publishing  Font and Lettering Styles The various parts of a font are shown below. The parts which are important to know for this course are:- point height serifs ascender and descender Material asked in 2006 Higher paper Material asked in 2001 Higher paper Material asked in 1999 Higher paper

Desk Top Publishing  Font and Lettering Styles When a font is chosen for a publication the point size is normally chosen. However, the part of the font which makes the size of the font look larger or smaller tends to be the x- height. A font with a small x-height will look smaller than a font with a large x-height, even if the point size is the same, as shown below.

Desk Top Publishing  Font and Lettering Styles Whichever font is chosen it’s looks can still be changed and altered. The size of fonts are given in POINTS and the point size can be altered NAIRN Fonts can also be changed in look and can be: NORMAL, BOLD or ITALIC They can be COLOURED or have COLOURED BACKGROUNDS 6 point 8 point 10 point 12 point 14 point 16 point They can be UNDERLINED or be EMBOSSED Or they can be SUPERSCRIPT or SUBSCRIPT Material asked in 2006 Higher paper Material asked in 2001 Higher paper

Desk Top Publishing  Text Layout The layout of text in a column can be altered in four main ways. Normally text is JUSTIFIED to the LEFT However it can also be justified in other ways The following examples show text justified:- RIGHT CENTRE FULLY This is an example of text which has been justified to the left. This is an example of text which has been justified to the left. This is an example of text which has been justified to the left. This is an example of text which has been justified to the right. This is an example of text which has been justified to the right. This is an example of text which has been justified to the right. This is an example of text which has been justified to the centre. This is an example of text which has been justified to the centre. This is an example of text which has been justified to the centre. This is an example of fully justified text. This is an example of fully justified text. This is an example of fully justified text. This is an example of fully justified text. This is an example of fully justified text. Material asked in 2006 Higher paper Material asked in 2001 Higher paper Material asked in 1999 Higher paper

Desk Top Publishing  Text Layout There are other more specialised effects that can be used to highlight particular parts of the document. A large ornate capital letter at the start of a paragraph is called a DROP CAPITAL By formatting the paragraph the text can be made to move round other graphics or to overlap a graphic. This is called TEXT WRAP. There are various different types of text wrap. Two of them are given here as examples Wrap tight round the edge of a picture. Wrap to the edge of the picture frame his is an example of a paragraph which starts with a drop cap letter. This is an example of a paragraph which starts with a drop cap letter. This is an example of a paragraph which starts with a drop cap letter. Material asked in 2003 Higher paper

Desk Top Publishing  Text Layout There are effects that can be used to change the way the text appears in the paragraph. The spacing between each line can be adjusted to tighten the text together or to space out the text. This is called LEADING The spacing of each letter, or individual letters, can be adjusted to make them closer or further apart. This is called KERNING. Leading is the amount of space between each line of text, and this can be varied from the default to a more positive leading which gives more space between lines, or to a negative leading which gives less space between the lines Material asked in 1999 Higher paper

Desk Top Publishing  Design Considerations When trying to design a publication for a client there are various thoughts and decisions to be made. Some thoughts are listed below, but this is not an exhaustive list and many more could be added. The Target Market should be considered. Is the publication for fun / serious readers? Are the readers young / old ? Should the layout be modern / traditional ? Etc. The Production Limitations also have to be considered. Type of paper available Type of printing / photocopying available Number of colours available at printing stage. Binding or stapling of pages. The Function of the publication should also be considered. Is it a news based document such as a newsletter ? Is it a trade journal or business publication ? Is it a comic ? Material asked in 2003 Higher paper

Desk Top Publishing  Design Elements Finally, how each of the design elements fits together will determine how the publication looks and how successful it is. Proportion – There should be an equal balance between each of the elements of the publication - text blocks and graphics items and white space – and none should be overly dominant. Unity – Unity describes where elements are placed on a page throughout a publication such as common page layouts, or headers / footers / folios / company logo etc. all placed in the same position throughout the publication, or a common colour or style being used throughout. Balance - This refers to Symmetrical or Asymmetrical layout of the page(s). Symmetrical is easier to achieve, but may not look as interesting as Asymmetrical layouts. Material asked in 2006 Higher paper Material asked in 2002 Higher paper Material asked in 1996 Higher paper Dominance – A particular element on a page can be dominant because of its position, size, boldness, colour, etc. The dominant element of a publication should be the main important item which the writer wants the reader to notice. An example of a dominant element can be the Headline / heading or a dramatic picture on a page

Desk Top Publishing  Design Elements (cont.) Consistency - When designing a series of publications for the same client the use of the same layout, fonts, graphic items, colours, etc in each of the publications will give consistency Rhythm - is achieved when there is repetition of elements, such as section heads, page numbers, etc that lead through the complete document. Careful positioning of the elements can be used to guide the readers eye through the document. Flow – Flow describes how information progresses through the document, such as text wrapping round pictures, and the change from page to page. The reader should be able to follow where the article goes without having to hunt for the next part. Contrast - makes the design interesting and eye-catching. The use of a bold font with a very thin font, or with light and dark areas on the page will give contrast in the publication. Material asked in 2002 Higher paper Material asked in 1996 Higher paper

PowerPoint Presentation produced by John McRae, Nairn Academy 2008