October 30 th 2007 1 Advances in Heat Transfer in High Field Accelerator Magnet B. Baudouy CEA/Saclay - Dapnia/SACM Annual meeting CARE07 29-31 October.

Slides:



Advertisements
Similar presentations
Superconducting Magnet Program S. Gourlay CERN March 11-12, Lawrence Berkeley National Laboratory IR Quad R&D Program LHC IR Upgrade Stephen A.
Advertisements

3nd KEK-CEA Workshop on Superconducting magnets and cryogenics for accelerator frontier - 24/03/2009 Ceramic insulation for Nb3Sn accelerator magnets F.Rondeaux.
September 2007 FP7-IA HFM JRA proposal G. de Rijk (CERN)1 FP7-IA HFM JRA proposal   The proposal is under discussion: we welcome input from potential.
1 What we know (and still don’t) on He II heat transfer through electrical insulation for accelerator magnets Bertrand Baudouy CEA, Irfu, SACM Gif-sur-Yvette.
11 September 2007 FP7-IA HFM JRA proposal G. de Rijk (CERN)1 FP7-IA HFM JRA proposal   Outline Motivation General description Proposed Work Packages.
November 29 th 2007 Thermomag-07 A CARE-HHH workshop on Heat Generation and Transfer in Superconducting Magnet November 2007 Paris WS-Summary based.
Optimisation of Roebel cable for HTS accelerator magnets
Unit 19 Measurements of strain, stress, and coil mechanical properties
Development of Superconducting Magnets for Particle Accelerators and Detectors in High Energy Physics Takakazu Shintomi and Akira Yamamoto On behalf of.
NED and post-NED WUT involvement NED S.C. meeting Maciej Chorowski.
WUT Experience in Measurements of the Heat Transfer Thought SC Cable Electrical Insulation Jaroslaw Polinski*, Maciej Chorowski*, Michal Strychalski*,
Davide Tommasini Improving heat transfer from cable to HeII LIUWG 15 November 2007 Typical insulations for Rutherford cables Heat transfer model Heat flux.
Next European Dipole (NED) Status Report Arnaud Devred CEA/DSM/DAPNIA/SACM & CERN/AT/MAS on behalf of the NED Collaboration HHH General Meeting CERN 11.
Eucard WP 7.3 HFM Winding and tooling tests Insulation choice F.Rondeaux /01/2011 Dipole design review- II-8 Winding and tooling tests – insulation.
A novel model for Minimum Quench Energy calculation of impregnated Nb 3 Sn cables and verification on real conductors W.M. de Rapper, S. Le Naour and H.H.J.
Davide Tommasini Nb3Sn versus NbTi in HeII THERMOMAG-07, Paris 19 November 2007 Typical insulations for Rutherford cables Heat transfer model Heat flux.
Workshop on Beam losses, heat deposition and quench levels for LHC magnets, Geneva, 3-4 March 2005 Liquid helium heat transfer in superconducting cable.
EuCARD WP 7 – High Field Magnets Task 7.2 – Support Study Status report EuCARD WP 7 – High Field Magnets Task 2 – Support studies Task 7.2 – Support Study.
CARE-HHH-AMT Workshop on Heat Generation & Transfer in Superconducting Magnets Paris, November 190th Experience at CEA Experience at CEA Jaroslaw.
FReSCa2 Technical Review, 9 th June 2015, CEA Saclay FReSCa2 Technical Review June 2015 CEA Saclay J.C Perez on behalf of Fresca2 collaboration team.
SC magnet developments at CEA/Saclay Maria Durante Hélène Felice CEA Saclay DSM/DAPNIA/SACM/LEAS.
Next European Dipole Insulation Development Simon Canfer, Elwyn Baynham, George Ellwood HHH Highlight Presentation at CERN, November.
CERN/CEA Collaboration agreement No. KE2275/TE WP4 – Nb 3 Sn technology development Pré-Kick-off meeting 03/07/2014.
Eucard-WP7-HFM 9 th Collaboration Meeting at Warsaw University of Technology Status on SMC & RMC Models J.C Perez on behalf of SMC collaboration team.
1 Numerical study of the thermal behavior of an Nb 3 Sn high field magnet in He II Slawomir PIETROWICZ, Bertrand BAUDOUY CEA Saclay Irfu, SACM Gif-sur-Yvette.
Fred Nobrega, Nikolai Andreev 21 September, 2015.
Application of QuickField Software to Heat Transfer Problems i j k By Dr. Evgeni Volpov.
Alain Hervé, ILD Workshop, Seoul 17 February 2009, 4365-ILD-T-Coil-Developments.ppt Possible Coil Developments ILD Workshop - SEOUL - 17 February 2009.
October/7/2011 J.C. Perez TE-MSC-MDT EuCARD WP7-HFM Collaboration Meeting (Geneva) SMC E U CARD WP7 HFM S TATUS UPDATE MEETING O CTOBER 2011 J.C. Perez.
Irradiation of insulators for EuCARD Workshop on Accelerator Magnet, Superconductor, Design and Optimization CERN Maciej Chorowski, Jaroslaw.
Technical agreement n 3 New SC Magnets activities P. Fessia (G. De Rijk), D. Reynet, J.M Rifflet.
November 19 th B. Baudouy CEA/Saclay - Dapnia/SACM Thermomag-07 A CARE-HHH workshop on Heat Generation and Transfer in Superconducting Magnet
Review of Quench Limits FermilabAccelerator Physics Center Nikolai Mokhov Fermilab 1 st HiLumi LHC / LARP Collaboration Meeting CERN November 16-18, 2011.
General Considerations for the Upgrade of the LHC Insertion Magnets
Superconducting Quadrupoles inside the HERA Experiments M. Bieler, DESY, LHC LUMI 05 Workshop, Arcidosso, September The HERA Interaction Region.
1 Heat load for a beam loss on the superconducting magnet Yosuke Iwamoto, Toru Ogitsu, Nobuhiro Kimura, Hirokatsu Ohhata, Tatsushi Nakamoto and Akira Yamamoto.
Magnet design issues & concepts for the new injector P.Fabbricatore INFN-Genova Magnet design issues & concepts for the new injector P.Fabbricatore INFN-Genova,
Understanding AC losses for LHC magnets What can we learn about heat exchange? Understanding AC losses Removing heat from the coil –Magnet (temperature)
Undulator Insulation materials Simon Canfer Advanced Materials Group Applied Science Division Technology
FRESCA2 Technical Meeting 5-Validation of coil winding with Cu coils Françoise Rondeaux 09/06/ CEA-Irfu-SACM-LEAS - 5-Rondeaux- FRESCA2 Technical.
Spacing of Cu clamp = 10” Clamp plate width = 2.5”, thickness = 0.375” Thickness of conductor insulation = 0.03” Thickness of coil ground wrap = 0.03”
1 Modeling of heat transfer in an accelerator superconducting coil with a ceramic insulation in supercritical helium S. Pietrowicz, B. Baudouy, CEA Saclay/
EuCARD WP 7 – High Field Magnets Task 7.2 Status report EuCARD WP 7 – High Field Magnets Task 2 – Support studies Task 7.2 Status report EuCARD HFM collaboration.
The HiLumi LHC Design Study is included in the High Luminosity LHC project and is partly funded by the European Commission within the Framework Programme.
CARE08, Dec , G. de Rijk, Summary report on NED activities 1 Summary Report on NED Activities Gijs de Rijk (CERN) on behalf of the NED collaboration.
Pier Paolo Granieri, TE-CRG Collimation Upgrade Specification Meeting #35 21 st March, 2014.
KEK-CEA Superconducting Magnet Co-operation Program The FJPPL workshop LAPP, Annecy-Le-Vieux (France), June LHC-3 Superconducting Magnets.
J. Polinski, B. Baudouy -The NED heat transfer program at CEA CEA Saclay, January 11th NED heat transfer program at CEA NED heat transfer program.
Henryk Piekarz SC Magnets at Fermilab HTS Cable Test for a Fast-Cycling Accelerator Dipole Magnet E4R Test Goals and Arrangement Review September 10, 2009.
HFM High Field Magnets, Search on documentation, 29/09/2009, Pierre Manil, 1/6 HFM Search on documentation related to the project Pierre MANIL CEA/iRFU/SIS.
EuCARD WP 7 – High Field Magnets EuCARD WP 7 – High Field Magnets Task 2 – Support studies Status report after M6 EuCARD HFM collaboration meeting – CERN.
Magnetic Refrigeration down to 1.6K for FCC_ee Jakub Tkaczuk Supported by: DRF Energy Program – DESA41K CERN FCC Collaboration Francois Millet, Jean-Marc.
EuCARD WP 7 – High Field Magnets EuCARD WP 7 – High Field Magnets Aim and goals Mini Workshop of Accelerators Radiation Mini Workshop of Accelerators Radiation.
Investigation of Suitability of the Method of Volume Averaging for the Study of Superconducting Magnet Thermo-Hydraulics 13/10/2011CHATS AS 2011 Hervé.
TE-MSC-MDT. FTEC Follow-Up Meeting Juan Carlos Perez TE-MSC-MDT Jose Ferradas TE-MSC-MDT 28/04/2016.
Ranko Ostojic AT/MEL 1.Beam heat loads 2.Magnet design issues related to heat loads.
Hervé Allain, R. van Weelderen (CERN)
Hervé Allain, R. van Weelderen (CERN)
The R&D programme on High Field Magnets (HFM)
Hervé Allain, R. van Weelderen (CERN)
J.C. Perez on behalf of SMC collaboration team J.C. Perez
Hervé Allain, R. van Weelderen (CERN)
To be presented at Nb3Al R&D Review,
SMC Design overview of the construction and project issues
EuCARD2 WP 10.2 HTS Conductor
I. Bogdanov, S. Kozub, V. Pokrovsky, L. Shirshov,
MQYY: superconducting Quadrupole magnet for Hl-lhc
Using the code QP3 to calculate quench thresholds for the MB
Cooling aspects for Nb3Sn Inner Triplet quadrupoles and D1
Review of Quench Limits
Presentation transcript:

October 30 th Advances in Heat Transfer in High Field Accelerator Magnet B. Baudouy CEA/Saclay - Dapnia/SACM Annual meeting CARE October 2007

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Outline ▫ Heat transfer in superconducting magnets for accelerator ▫ The NED Heat Transfer program ◦ Double-bath cryostat for NED ◦ Test facilities ▫ Experimental results ◦ Technical solution tests ◦ Tests on NED electrical insulations − the classical insulation − the innovative insulation ▫ People in and around NED HT program ◦ J. Polinski, F. Rondeaux (CEA), S. Canfer (RAL) ◦ N. Kimura (KEK) ◦ D. Richter (CERN) ◦ F. Michel (CEA – Grenoble)

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Heat transfer in accelerator magnets (1/2) ▫ “Wet” magnets with “heat exchanger” ◦ Large internal losses and smaller stored energy ◦ Single phase coolant in contact with conductor ◦ Cooling Source: Internal tube flow heat exchanger ▫ Heat transfer between the conductor and the cooling source determines the temperature margin ▫ Electrical insulation constitutes the largest thermal barrier ▫ LHC Electrical Insulation : All-polyimid ◦ 10 mW/cm 3 or 0.4 W/m (cable) ◦ ΔT<0.3 K with permeable insulation or ΔT~4 K with monolithic insulation ◦ He II + Conduction

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Heat transfer in accelerator magnets (2/2) ▫ “Beam losses” of LHC upgrade with Nb 3 Sn Magnets ◦ 50 to 80 mW/cm 3 or 2 to 3 W/m (cable) → ΔT~ K with polyimide insulation ◦ Dry insulation for Nb 3 Sn Magnets ! ▫ Development of “innovative” ceramic insulation ◦ Thermal treatment (insulation+Nb 3 Sn, easier and less costly construction) ◦ Fiberglass + ceramic precursor (CEA patent) ◦ Higher heat transfer rate, larger He volume in the insulation (Cp) and heat exchange surface increase (matrix participation) CeramicClassic (Polyimid)Full impregnation Pore size d~100 µm (peak)10 to 100 µm- Porosity ε 4.5 to 29 %~1 %- Conductivity k≈ W/Kmk kapton ≈ K- k epoxy ≈10 -2 W/Km Courtesy of F. Rondeaux (CEA)

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th The NED heat transfer program ▫ Characterization of the thermal performance of the magnet insulation ◦ Classical insulation and Innovative insulation ◦ “real situation” (coil) and on the insulation itself ▫ Construction of a pressurized He II double bath cryostat ▫ The drum experiment ◦ Determination of the thermal conductivity and Kapitza resistance ▫ The stack experiment ◦ Test on a stack of conductors closed to the coil mechanical, geometrical and heat transfer configurations ▫ Collaboration CEA-Saclay, KEK, CERN and RAL ◦ Tests in He II at CERN and Saclay, Tests in SHe at KEK (N. Kimura) ◦ Construction of a Double bath Cryostat (WUT and CEA-Saclay) (J. Polinski) ◦ Construction of molds by KEK (N. Kimura) ◦ Collaboration with D. Richter at CERN

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th The NED Double bath Cryostat CEA Saclay and WUT

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th The Stack Experiment ▫ Characterization of the thermal performance of the magnet insulation ◦ “real cable” geometry (CuNi cable) ◦ Real electrical insulation ◦ Mechanical constraints (compression) ◦ Heat transfer configuration (Joule heating)

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th The Drum experiment ▫ Heat transfer measurement perpendicular to the insulation (1 D) ◦ Determination of the thermal conductivity ◦ Determination of the Kapitza resistance

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Technical solution tests (1/2) ▫ Test with a “Saclay stack” ▫ Central conductor heated ▫ Insulation all polyimide (Kapton) ◦ 1 st layer : Kapton 200 HN 50 μm x 11 mm 2 wrappings (no overlap) ◦ 2 nd layer Kapton 270 LCI 71 μ m x 11 mm 2 mm gap ▫ 60 MPa SS conductor

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Technical solution tests (2/2) LHC beam Losses

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Tests on the classical insulation ▫ Glass-fibre epoxy insulation ◦ Developed by RAL ▫ Determination of λ and R Kapiza ◦ To be published Low temperature heat transfer properties of conventional electrical insulation for the Next European Dipole, J. Polinski et al., CEC 2007, Chattanooga, USA, 2007 Insulation Development for the Next European Dipole, S. Canfer et al., MT20, Philadelphia, USA, 2007

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Tests on the Innovative insulation (1/2) Courtesy of F. Rondeaux (CEA) ▫ One wrapping with 50% overlap ▫ Heat treatment of 100 h at 660 °C ▫ 10 MPa compression only ! ▫ 5 conductors heated

B. Baudouy CEA Saclay Advances in Heat Transfer in High Field Accelerator Magnet October 30 th Tests on the Innovative insulation (2/2) ▫ Very small ΔT, at least one order of magnitude smaller than for the LHC insulation tests LHC beam Losses LHC upgrade beam Losses