Author’s Name Goes Here (Student ID) Electrical and Computer Engineering Department Ryerson University The page size of this poster template is 24”x36”, portrait (vertical) format. You may change the orientation (portrait or landscape), layout of the sections and colour scheme for this poster. Unlike articles, it is often a good idea to use “sans-serif” fonts like Arial for your poster’s text because it is easier to read from a distance. You can insert equations if you wish: In this section you can discuss the motivation behind your project and can name some key references. Make sure to print this poster out on a draft sheet of paper prior to going to the print shop to have it done properly. Make sure the colours look right on paper. When you go to the print shop (like the one in back of the Engineering building at Ryerson, on Dalhousie Street) make sure to specify the size and that it should be mounted on foam core (a rigid backing). Note: the maximum size (width or height) is about 36 inches (due to the printer dimensions). You can also continue mentioning your key literature survey findings here. The body text / font size should be 28 points. Arial, Helvetica or other sans-serif fonts are good. Keep body text left-aligned, do not justify text. Tips for making a good poster: Write your text on paper first. Try a rough layout on paper Don’t use dark backgrounds Use bold, not underline or italics to emphasize a point Don’t write too much. Include only key points. Key sentences short Use bullet points Use illustrations or pictures or colour graphs Spell check. Have your little brother proof-read. This is based on the poster template by Manuel Jimenez, Electrical and Computer Engineering Department University of Puerto Rico at Mayagüez Always list the people who helped you on this project. However, you normally don’t list your professor’s name here. Make sure to check out these sources of information on posters: 1/posteradvice.htmhttp:// 1/posteradvice.htm /bme100/docs/UZH_poster_guideline.pdfhttp:// /bme100/docs/UZH_poster_guideline.pdf [1] J. Zhoou, “Big Elephants Step on Computers,” IEEE Transactions on Funny Circuits and Systems, vol. 40, pp , [2] J. Doe, “Cool Electronic Gadgets,” IEEE Transactions on Funny Circuits and Systems, vol. 37, pp. 447–451, [3] S. Bioperson, “Reliable Posters,” Proceedings of the IEEE International Symposium on Things, pp. 417–420, Introduction Analysis Discussion Captions can also go below the image. Make sure to use a large resolution photo. Web photos / Internet photos are usually really bad looking on a poster. Photo reproduced from [2]. Graphs with a title, legends and labels on the axes can be helpful. Make sure to cite the original source of the graph [1]. Write your Captions in Times or Times New Roman. You can align the caption on the side like this. Always make sure to reference your source if it is not your own. For instance: (Photo courtesy of James Smith) or with a reference [1]. You can create graphs directly in Microsoft Excel or Powerpoint and import them here. You can also make a graph in a different program and save as JPG or TIFF and then import using Insert->Picture->From File. Acknowledgements References Tables should also have captions. However they have their captions above the table, not under it! Again make sure to cite your source [3]. Always make sure to reference the source of your photos or illustrations, unless you made them yourself. Then you don’t need to cite an additional source. Isn’t this a beautiful picture? Note that it takes a long time to get these posters printed. Factor in at two to three business days before the deadline! TABLE 1: Usage of Things FormatThing 1AThing 2B Small3%32% Big22%33% Extra Big33%44% Large22%32% Your Title: 24” x 36” Poster Template for BME 100 Poster (Position Paper Project) Make sure to print this poster out on a draft sheet of paper prior to going to the print shop to have it done properly. Make sure the colours look right on paper. Conclusions