OMEGA ® Scanner Overview

Introduction The OMEGA® Tracer® System allows practitioners to create prosthetic and orthotic devices electronically instead of with plaster The system features the OMEGA Scanner – Hand-held laser scanner – Non-contact – Completely portable

The contours of the shape being captured are determined by a pulsed crosshair laser that is emitted from the Scanner. Simultaneously, LEDs illuminate reflective targets on the surface of the shape so that digital cameras in the Scanner can record the position of the targets in space.

Capable of scanning directly over skin, sock, liner, plaster, or foam Able to scan complex and intricate or detailed shapes and surfaces Can pause and resume scanning during the scanning session Can merge two scans to create a shape

OMEGA Scanner Applications

Prosthetic Below Knee Above Knee Below Elbow Above Elbow Breast Orthotic Insole AFO Cranial Knee Spinal

Alpha DESIGN ® Liners Upper and lower extremity shapes captured with the Scanner can be used as the basis for creating custom Alpha Liners Ideal for providing comfort and protection for patients who are not suited for off-the-shelf components

Below Knee Example

Above Knee Example

Below Elbow Applications Accommodates various levels of amputation for Below Elbow as well as Wrist Disarticulation patients Skin-fit suction sockets DESIGN liners

Above Elbow Applications Accommodates various levels of amputation for the Above Elbow, as well as Elbow and Shoulder Disarticulations DESIGN liners

Custom Breast Prostheses Scans of the intact breast and surgical site are taken and merged into a single shape in the software Order form is completed within Tracer and is sent to a WillowWood fabrication partner with the shape file for fabrication

Insoles Direct scan of foot Scan of foam impression

AFOs Scan the outer surface of a negative model Scan the inner surface of 2 halves of a negative model Scan the limb with the foot in a foam impression box

Cranial Remolding Helmets After the shape is captured with the OMEGA Scanner and modified as desired, the file is sent to an FDA-approved partner for fabrication

Knee Braces Knee shapes can be captured using the OMEGA Scanner and sent to the desired manufacturer for brace fabrication

Spinals Scan the patient directly or scan a cast of the patient

Using the Scanner Hand-held, non-contact, portable Captures intricate detail Wide range of orthotic and prosthetic applications

OMEGA ® Scanner Overview