Unitronics 2009

Review Hardware Review Software & Utilities Jazz® Series M91 Series Vision120™ Series Vision130™ Series Vision Graphic/Touch OPLC Color Vision Software & Utilities

Review Hardware Review Software & Utilities

Jazz® Micro OPLCTM Key Points: Two line display Real Keypad for Data entry Modbus and open protocol communication SMS/ cellular connection Auto-tune PID, up to 4 loops Full project upload Low cost

Jazz® Micro OPLCTM 9 models of JazzTM OPLC JZ10-11-R10 – 6 DI, 4 RO JZ10-11-T10 – 6 DI, 4 TO JZ10-11-R16 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 6 RO JZ10-11-T17 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 7 TO JZ10-11-R31 – 16 DI, 2 D or A (0-10V) inputs, 2AI (0/4-20 mA), 11 RO JZ10-11-T40 – 16 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 20 TO JZ10-11-PT15- 3 DI, 3 D or A inputs, 3 PT1000/NI1000 inputs, 5 RO and 1 TO (HSO) JZ10-11-UN20 – 9 DI, 2 D or A (0-10V) inputs, 1 AI (0/4-20 mA), 1 PT100/TC inputs, 5 RO, 2 TO JZ10-11-UA24 – 9 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 2 PT100/TC inputs, 5 RO, 2 TO, 2 Analog Outputs

M91 Micro OPLCTM Key Points: Two line display Real Keypad for Data entry Modbus & open protocol communication SMS via GSM communication Full project upload Auto-tune PID, up to 4 loops Expandable Small Data Base (1024 registers) Low cost

M91 Micro OPLCTM 10 models of the M91 OPLC M91-2-R1 - 10 DI, 1 AI , 6 RO M91-2-R2C - 10 DI, 2 AI , 6 RO M91-2-R34 - 20 DI, 2 A/D I, 12 RO M91-2-R6C - 6 DI, 6 AI, 1HSI, 6 RO M91-2-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO M91-2-T1 - 12 DI, 12 TO M91-2-T2C - 10 DI, 2 A/D I , 12 TO M91-2-T38 - 22 DI, 16 TO M91-2-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO M91-2-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

Vision120TM Graphic OPLCTM Key Points: Graphic display 128x64 Real Keypad for Data entry Application size of 448K 2 serial ports RS232/485 Modbus and open protocol communication Supports CANopen SMS/cellular connection-GSM/GPRS Full project upload Expandable Data Table

Vision120TM Graphic OPLCTM

Vision120TM Graphic OPLCTM 10 models of the V120 OPLC V120-22-R1 - 10 DI, 1 AI , 6 RO V120-22-R2C - 10 DI, 2 AI , 6 RO V120-22-R34 - 20 DI, 2 A/D I, 12 RO V120-22-R6C - 6 DI, 6 AI, 1HSI, 6 RO V120-22-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO V120-22-T1 - 12 DI, 12 TO V120-22-T2C - 10 DI, 2 A/D I , 12 TO V120-22-T38 - 22 DI, 16 TO V120-22-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO V120-22-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

Vision130TM Graphic OPLCTM

Vision130TM Graphic OPLCTM Key Points: Graphic display 128x64, 2.4" Real Keypad for Data entry Application size of 512K; 20µsec per 1K 1 build in serial ports RS232/485 Option for a second port RS232/485 or Ethernet Modbus and open protocol communication serial and over IP Supports CANopen (CANbus as an add on module) GPRS/GSM/CDMA enabled Full project upload Expandable Data Table, Text string library

Vision130TM Graphic OPLCTM 9 models of the V130 OPLC V130-33-R2 - 10 DI, 2 A/D I, 6 RO V130-33-R34 - 20 DI, 2 A/D I, 12 RO V130-33-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO V130-33-T2 - 12 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO V130-33-T38 - 22 DI, 2 A/D I, 3HSI and 7 HSO, 16 TO V130-33-TA24 - 12 DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10 TO V130-33- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO V130-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO. V130-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530) Key Points: Graphic display 128x64 to 320x240; 3.2” – 5.7” Real Keypad for Data entry/virtual keyboard on the touch Application size of 1MB; 30µsec per 1K 2 build in serial ports RS232 Option for a 3rd port RS232/485 or Ethernet Supports CANopen GPRS/GSM/CDMA enabled Full project upload Expandable Data Table Modbus and open protocol communication

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530)

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530) Expansions EX-A1-expansion adapter IO-DI8-TO8 IO-DI16 IO-TO16 IO-DI8-RO4 IO-RO8 IO-RO16 IO-DI8ACH EX90-DI8-RO8 Fast response IO-AI4-AO2 IO-AO6X IO-ATC8 IO-LC1/3 IO-PT400 IO-PT4K

VisionTM Graphic/Touch OPLCTM (V230/260/280/290/530) Snap-in I/Os 6 Snap-in models: V200-18-E1B V200-18-E2B V200-18-E3XB V200-18-E4XB V200-18-E5B V200-18-E6B

EX-RC1- Remote IO Adapter The EX-RC1 enables you to remotely locate I/Os up to 1 kilometer from a PLC. You can include both PLCs and adapters on the UniCAN network, up to a total of 60 nodes. Up to 8 I/O modules can be connected to a single adapter.

XL Expansion Modules EX-D16A3-RO8 / TO16 24 VDC 16 Digital Inputs PNP/NPN, including 1 HS Counters 3 Analog Inputs 15 PNP+ 1 PNP/NPN Transistor Outputs,1 HSO Or 8 Relay output (model EX-D16A3-RO8) IO D16A3-RO16 / TO16 24 VDC 16 Digital Inputs PNP/NPN, including 2 HS Counters 3 Analog Inputs 16 Relay/Transistor Outputs

VisionTM Color OPLCTM

VisionTM Color OPLCTM Vision350TM - The first 3.5“ color Touch screen OPLC on the market Digital, Analog and PT100/TC inputs, Digital and Analog outputs Application size of 1MB, 15µsec per 1K Supports CANopen Ethernet option QVGA color TFT display Support Micro SD

VisionTM Color OPLCTM 9 models of the Vision 350TM OPLC V350-35-R2 - 10 DI, 2 A/D I, 6 RO V350-35-R34 - 20 DI, 2 A/D I, 12 RO V350-35-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO V350-35-T2 - 10 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO V350-35-T38 - 20 DI, 2 A/D I, 2 HSI and 7 HSO, 16 TO V350-35-TA24 - 8 DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10 TO V350-35- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO V350-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO. V350-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

V130 & V350 with TRA22 or TR34 I/O board HSC / Shaft Encoder V130 & V350 with TRA22 or TR34 I/O board Push-Pull PNP/NPN Driver Type 200 kHz Max 100 kHz Max HSC 50 kHz Max Shaft encoder High Speed NPN Transistor output: Frequency Range 5-200 kHz Support PTO

VisionTM Color OPLCTM Vision570TM - And much more… 5.7“ color Touch screen OPLC plus Snap-in & expansion I/Os TFT Color Graphic display, QVGA Application size of 2MB; 9µsec per 1K 2 build in serial ports RS232/485 Option for a 3rd port RS232/485 or Ethernet Modbus and open protocol communication serial or over IP Build in Alarms, string library and trends tasks CANopen Support SD Support Web server capabilities And much more…

The New V570 model with built in I/O VisionTM Color OPLCTM The New V570 model with built in I/O V570-57-T34 : 16 DI (Isolated), 2 HSC / Shaft Encoder, 2 AI, 16 TO (Isolated)

Review About Unitronics Hardware Review Software & Utilities

Software - programming environment M91 and Jazz are programmed using the U90Ladder All Vision products are programmed using the Visilogic In order to ensure Backwards compatibility Unitronics provides also the Version swapper

Software Utilities - Remote Access A tool that the machine builder/system integrator can give his customer as an added value for its selection to work with Unitronics’ products Using Remote Access one can access the displays of the PLC, operand values, data tables and even download using the UniDownloader

Software Utilities - DataXport DataXport is a server based application that allows to retrieve the data stored at the data tables of the PLC using different communication methods and based on automatic process

Software Utilities - Communication DDE/OPC gives a standard way to connect to the Unitronics OPLC using any SCADA or other Windows based application

Software Utilities – SD Suite SD Suite Use SD Suite to format an SD card to be compatible with Unitronics OPLC, and to Access,convert, read, and export the content of files that a Unitronics OPLC creates on a SD card.

Software Utilities – Remote Operator Remote Operator - Enables you to use a PC to view and work with several remote controller's HMI panel at the same time.

Software Utilities – UniDownloader UniDownloader - Enables you to download complete applications to local or remote controllers. These applications are in compressed .udc format.

Thank you