Procedure of Connecting Coil Unit In series with Capacitor 10 April 14 Product: Fully Automatic Washing Machine

Procedure : 1.Remove the wire connector of Joint between Capacitor Red Wire, Motor Red Wire & Harness Red Wire. 2.Pick up the New Coil Unit. Do not Disassemble or change the shape of Coil unit. 3.Connect the one end of Coil unit to Capacitor Red Wire. 4.Crimp the wire connectors on wire joint between Coil wire & Capacitor Red wire. 5.Connect another end of Coil unit to joint between Red wire from Motor & Red wire from Harness. 6.Crimp the wire connectors on wire joint between Coil wire, Red wire from Motor & Red wire from Harness. 7.After connecting Coil You have two separate joints of Red coloured wires.before it was Single joint of red wires as shown in photos. Continue on next Page … Procedure of Connecting Coil Unit In series with Capacitor Applicable Models : 10 April 14 Joint 2 : Between Coil one end & Capacitor Red Wire Joint 1 : Between Coil one end & Motor Red Wire & Harness Red wire Present condition of machine : Single Joint between Capacitor Red Wire, Motor Red Wire, Harness Red Wire After Coil Connect VT 60H12 VT 65H12 VT 65E12 VT 60A12 VT 65G11 VT 65B11 KT6521

Procedure : 8. Above Capacitor screwing hole there is a extra hole on cabinet as marked in photo. 9. On Coil Unit there is a push mount present as marked in photo. 10. Fix this Push mount cable tie in holes present above the Capacitor screwing hole. Procedure of Connecting Coil Unit In series with Capacitor 10 April 14 Precautions : 1.Do not Disassemble or change the shape of Coil unit. 2.After attaching the coil please do proper harnessing of all connectors. Hole in to which Coil to be fixed from inner side of Cabinet with Push mount cable tie Push Mount cable tie present on Coil Unit Attached coil unit with cabinet with the help of push mount cable tie After fixing Coil from inner side of cabinet

Procedure of Connecting Coil Unit In series with Capacitor FAWM Wiring Diagram for connections