Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Room Temperature rf High Gradients: Physics, rf design and Technology When Maxwell’s.

Slides:



Advertisements
Similar presentations
CHAPTER 4 CONDUCTION IN SEMICONDUCTORS
Advertisements

Multiphysics simulations of surface under electric field
Chapter 3 HV Insulating Materials: Gases Air is the most commonly used insulating material. Gases (incl. air) are normally good as electrical insulating.
Field Emission Measurements with CERN DC-Spark System Tomoko MURANAKA Hebrew University / CERN.
Conductors and Dielectrics in Static Electric Fields
Experimental breakdown studies – breakdown diagnostics Linking simulation and experiment Jan W. Kovermann, CERN, RWTH Aachen SLAC workshop July 2009.
Effects of External Magnetic Fields on the operation of an RF Cavity D. Stratakis, J. C. Gallardo, and R. B. Palmer Brookhaven National Laboratory 1 RF.
1 More on gas filled rf cavities Alvin Tollestrup RF One Day Workshop Oct 15, 2008.
STREAMER DYNAMICS IN A MEDIA CONTAINING DUST PARTICLES* Natalia Yu. Babaeva and Mark J. Kushner Iowa State University Department of Electrical and Computer.
High Gradient and High Q R&D Topics 1- Explore Q > for TESLA parameter flexibility –higher luminosity through higher rep rate, longer rf pulse… 2-
Schottky Enabled Photoemission & Dark Current Measurements John Power, Eric Wisniewski, Wei Gai Argonne Wakefield Accelerator Group Argonne National Laboratory.
Plasma Kinetics around a Dust Grain in an Ion Flow N F Cramer and S V Vladimirov, School of Physics, University of Sydney, S A Maiorov, General Physics.
CMS HIP Multiscale simulation Model of Electrical Breakdown Helsinki Institute of Physics and Department of Physics University of Helsinki Finland Flyura.
Kinetic Theory The kinetic theory is an explanation of how particles in matter behave.
DC breakdown measurements Sergio Calatroni Present team: Jan Kovermann, Chiara Pasquino, Rocio Santiago Kern, Helga Timko, Mauro Taborelli, Walter Wuensch.
CLIC Breakdown Workshop – CERN, May / 13 Delay Times in Breakdown Triggering CERN, TS-MME Antoine Descoeudres, Sergio Calatroni, Mauro Taborelli.
DC breakdown experiments M.Taborelli, S.Calatroni, A.Descoeudres, Y.Levinsen, J.Kovermann, W.Wuensch CERN Ranking of materials Cathode mechanism Field.
DC breakdown measurements Sergio Calatroni Present team: Gonzalo Arnau Izquierdo, Jan Kovermann, Chiara Pasquino, Rocio Santiago Kern, Helga Timko, Mauro.
Chapter 24 Electric Current. The electric current I is the rate of flow of charge through some region of space The SI unit of current is Ampere (A): 1.
Jean-Charles Matéo-Vélez, Frédéric Thivet, Pierre Degond * ONERA - Centre de Toulouse * CNRS - Mathématiques pour l'Industrie et la Physique, Toulouse.
Accelerating structure test results and what’s next Walter Wuensch CTF3 collaboration meeting
Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Room Temperature rf High Gradients: Physics, rf design and Technology When Maxwell’s.
Vacuum Technology in Electrical Switches
Means & Methods of Homogeneous Charge Combustion P M V Subbarao Professor Mechanical Engineering Department A Sudden Combustion, Yet Needs A Care & takes.
Particle-in-Cell Modeling of Rf Breakdown in Accelerating Structures and Waveguides Valery Dolgashev, SLAC National Accelerator Laboratory Breakdown physics.
Chapter 3 Solid-State Diodes and Diode Circuits
IWLC 2010 CERN European Organization for Nuclear Research Helga Timkó Oct. 21 st, A Review on CLIC Breakdown Studies Helga Timkó, Flyura Djurabekova,
My office change was not reflected on the syllabus. It is now ESCN Our first exam is a week from next Tuesday - Sep 27. It will cover everything.
CMS HIP Multiscale modelling of electrical breakdown at high electric field Flyura Djurabekova, Aarne Pohjonen, Avaz Ruzibaev and Kai Nordlund Helsinki.
ENE 311 Lecture 9.
1 PHYS 3313 – Section 001 Lecture #10 Monday, Feb. 17, 2014 Dr. Jaehoon Yu Photoelectric Effect Compton Effect Pair production/Pair annihilation Monday,
States of Matter Kinetic Theory. An everyday activity such as eating lunch may include some states of matter. Q: Can you identify the states of matter.
CLIC Workshop – CERN, October / 17 DC breakdown experiments for CLIC CERN, TS-MME Antoine Descoeudres, Trond Ramsvik, Sergio Calatroni, Mauro Taborelli.
5 장 Dielectrics and Insulators. Preface ‘ Ceramic dielectrics and insulators ’ is a wide-ranging and complex topic embracing many types of ceramic, physical.
Ionization Detectors Basic operation
Comparative studies of high- gradient rf and dc breakdowns CLIC talk Jan W. Kovermann
High gradient acceleration Kyrre N. Sjøbæk * FYS 4550 / FYS 9550 – Experimental high energy physics University of Oslo, 26/9/2013 *k.n.sjobak(at)fys.uio.no.
The CERN dc Spark System (and a little bit of theory)
Field enhancement coefficient  determination methods: dark current and Schottky enabled photo-emissions Wei Gai ANL CERN RF Breakdown Meeting May 6, 2010.
Lecture 20: The mechanism of plastic deformation PHYS 430/603 material Laszlo Takacs UMBC Department of Physics.
Mechanical Properties & Reactivity. Review BCC → Body-Centered-Cubic 3 most common type of Crystalline Structures FCC → Face-Centered-Cubic HCP → Hexagonal-Close-Packed.
Progress in Breakdown Modelling – MD and PIC Breakdown Simulations Helga Timkó, Flyura Djurabekova, Kai Nordlund, Aarne Pohjonen, Stefan Parviainen Helsinki.
CMS HIP Plasma-Wall Interactions – Part I: In Fusion Reactors Helga Timkó Department of Physics University of Helsinki Finland.
Walter WuenschLCWS October 2012 Workshops on X-band and high gradients: collaboration and resource.
The CLIC accelerating structure development program Walter Wuensch CARE05 23 November 2005.
DC Spark Developments Nick Shipman - Thursday, 16 August
DC Spark Test System for CLIC
CMS HIP Plasma-Wall Interactions – Part II: In Linear Colliders Helga Timkó Department of Physics University of Helsinki Finland.
The kinetic theory is an explanation of how particles in matter behave. Kinetic Theory 16.1.
An Estimation of Critical Electron Density at Just Starting Breakdown in Gases Mase. H Professor Emeritus of Ibaraki University.
HIP News from Helsinki… Flyura Djurabekova Helsinki Institute of Physics and Department of Physics University of Helsinki Finland.
High-gradient rf constraints W. Wuensch X-band workshop
Breakdown statistics in the large- electrode DC spark system Anders Korsbäck, BE-RF-LRF University of Helsinki Special thanks to Walter Wuensch and Jorge.
Finite elements simulations of surface protrusion evolution due to spherical voids in the metals 2013 University of Tartu: V. Zadin A. Aabloo University.
Walter WuenschTsinghua University, 19 May 2013 Recent progress in understanding breakdown.
Chapter 7 The electronic theory of metal Objectives At the end of this Chapter, you should: 1. Understand the physical meaning of Fermi statistical distribution.
Design of Ignition System for SI Engines P M V Subbarao Professor Mechanical Engineering Department A Successful Ignition leads to Efficient Combustion…
CSE251 CSE251 Lecture 2 and 5. Carrier Transport 2 The net flow of electrons and holes generate currents. The flow of ”holes” within a solid–state material.
Superconductivity and Superfluidity The Microscopic Origins of Superconductivity The story so far -what do we know about superconductors?: (i) Superconductors.
SPES Target Group Data…… INFN-CISAS-CNR collaboration The Ablation Ion Source for refractory metal ion beams A preliminary design.
. Atomistic simulations of field evaporation in atom probe tomography S. Parviainen, F. Djurabekova, K. Nordlund.
HIGH VOLTAGE ENGINEERING (HVE)
High field enhancement due to the surface changes
PLASMA INTIATION IN VACUUM ARCS -- Part 1: Modelling
Electro-mechanical and thermal simulations of surface under electric field V. Zadin, S. Parviainen, A. Aabloo, F. Djurabekova 2013.
Participation IAP NAS of Ukraine in understanding of vacuum breakdown phenomena Iaroslava Profatilova, V.Baturin, O. Karpenko.
Molecular Dynamics Simulations of Ion Irradiation of a Surface under an Electric Field S. Parviainen, F. Djurabekova.
A Review of CLIC Breakdown Studies
ArcPIC2D update: Arc spreading through flat emission Kyrre N
Chapter 3 Solid-State Diodes and Diode Circuits
Presentation transcript:

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Room Temperature rf High Gradients: Physics, rf design and Technology When Maxwell’s equations just aren’t enough Part II: Deeper into the Physical Processes of Breakdown

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Before we try to understand breakdown in an rf cavity, we will look in depth into the physics of breakdown – a spark if you will. I will start by introducing the overall multi-step and multi-scale picture of breakdown, the big picture – this will be shocking. Then we cover the individual steps in more detail all the while looking back at the big picture. This chapter will primarily refer to dc sparks. This is partly because we can understand a simple system better and partly because most of the detailed work on breakdown is for dc. Almost everything presented in this section applies to rf. The next section will then take those ideas and apply them in an rf cavity.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The big picture

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Charges collect at cathode non-uniformities under applied electric field [fs, nm] Local joule heating [ns,  m] Tensile electric stress [fs, nm] Field (and thermionic) emission Structure of surface modified under time/cycles [s, 10 7 pulses, nm] Thermal stress Field enhanced evaporation of neutrals Ionization ionization electrons are accelerated away from cathode [mm] Ions are accelerated towards cathode [  m] Ions strike cathode and kick out neutrals, ions and electrons Plasma spot forms [few ns, ’s of  m] Plasma sheath forms [  m] enhanced electron emission due to sheath potential and temperature surface melts due to ion bombardment [10-100’s of  m] Electron current accelerated in external field absorbs system energy [mm] (go to plasma dynamics) enhanced neutral emission, plasma feeding accelerates Breakdown trigger Avalanche starts Plasma feeding process Plasma dynamics Macroscopic energy transfer (from plasma feeding)

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Field emission

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Charges collect at cathode non-uniformities under applied electric field [fs, nm] Local joule heating [ns,  m] Tensile electric stress [fs, nm] Field (and thermionic) emission Structure of surface modified under time/cycles [s, 10 7 pulses, nm] Thermal stress Field enhanced evaporation of neutrals Ionization ionization electrons are accelerated away from cathode [mm] Ions are accelerated towards cathode [  m] Ions strike cathode and kick out neutrals, ions and electrons Plasma spot forms [few ns, ’s of  m] Plasma sheath forms [  m] enhanced electron emission due to sheath potential and temperature surface melts due to ion bombardment [10-100’s of  m] Electron current accelerated in external field absorbs system energy [mm] (go to plasma dynamics) enhanced neutral emission, plasma feeding accelerates Breakdown trigger Avalanche starts Plasma feeding process Plasma dynamics Macroscopic energy transfer (from plasma feeding)

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Vacuum breakdowns, the kind relevant for rf cavities, start on the negatively charged electrode – the cathode. The main physical effect on the cathode which drives the breakdown is field emission, electron currents which tunnel out of the surface due to the applied electric field, which we have already seen in dark current. The field emission current flows through discrete locations on the surface called emission sites, the origin of which we will discuss later but they are very small. The current heats the area around the emission site according to the same formulas we saw for pulsed surface heating – but current densities are much higher and we can easily go near the melting point of a metal surface.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Now we look in more detail at the physics of field emission. Electron emission from a surface due to an applied electric field is described by the Fowler-Nordheim relation. The basic physics contained in the equation describes the tunneling of electrons through the surface potential barrier. The validity of the equation has been verified in nm-scale sharp tips such as those used in scanning tunneling microscopes for example But correction factors must be applied to macroscopic metal surfaces because we see enhanced emission from surface non- uniformities. We’ll return to this fact-of-life later.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The surface potential used for solving the Fowler- Nordheim equation V(z)= { -W a for z<0 -eEz-e 2 /4zfor z>0

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The Fowler-Nordheim equation (approximate, practical form) Units: [I]=A, [E]=MV/m, [A e ]=m 2, [  ]=eV and [  ]=dimensionless Values:  = 4.5 eV for copper

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 If you measure emission from real, macroscopic metal surfaces – like you see in rf cavities and dc spark systems - you see that the Fowler Nordheim equation works perfectly except that you need to multiply the electric field by a factor typically of to get the thing to fit. This “minor” discrepancy is caused by the local surface non- uniformities I have referred to. They are usually attributed to dirt particles or microscopic tips which give a local electric field enhancement factor. But certain chemical contaminants and crystal dislocations can lower the work function and enhance field emission. Crazy little thing called  …

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The Fowler-Nordheim equation Analyzing real data -- You will have the opportunity to analyze a real set of data tonight for homework!

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 However high  features are rarely, if ever, observed independently of field emission. Specifically the expected field enhancements samples are not predicted, from electron microscope images. Part of the answer may that the emission sites are small, nm size. In fact we get nm scale by fitting the FN equation in our dc spark tests assuming the origin are tips. Why are we spending so much time on one box of the diagram? The practical consequences of enhanced field emission are significant – we should be able to handle ≈ 10 GV/m surface fields but we can only manage ≈ 200 MV/m.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Also a large part of conditioning occurs with  E constant, with gains in E obtained through reduction in . A typical measured value of  E near the breakdown limit for copper is 8 GV/m - alternatively this is 1 eV/Å. To get an idea of the scale, the cohesive energy of a Cu atom in a crystal is 3.46 eV/atom and the inter-atomic spacing is 3.6 Å, hence… So extracting  from the IV characteristics of a surface is important experimental exercise, and understanding where it comes from an important exercise for the field!

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 A short introduction to the dc spark system at CERN

CLIC meeting – June 26 th, / 25 Experimental set-up : ‘‘ the spark system ’’ V power supply (up to 15 kV) C (28 nF) vacuum chamber (UHV mbar) anode (rounded tip, Ø 2 mm) cathode (plane) HV switch spark  -displacement gap  m ( ± 1  m) 20  m typically Two similar systems are running in parallel Types of measurements : 1)Field Emission (   ) 2)Conditioning (  breakdown field E b ) 3)Breakdown Rate (  BDR vs E)

IWLC 2010 Helga Timkó Oct. 21 st, Modelling DC discharges  First we have to understand breakdowns in DC, before we can generalise to RF  Simple and cost-efficient testing of breakdown behaviour with two DC setups at CERN We adjusted also out theoretical model to the DC experimental conditions  However, results are completely general! e.g. Cu r=1 mm d=20 μm ~ 4-6 kV

CLIC meeting – June 26 th, / 25 Evolution of  & E b during conditioning experiments Measurements of  after each sparks (Cu electrodes)  ↔ next E b correlation  · E b = cst  ↔ previous E b no correlation Antoine Descoeudres

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 T. Higo, KEK Test of TD18 An example of the same thing in an rf cavity

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Identifying the origin of , and finding a way of independently verifying it, is one of the big open issues in breakdown R&D. Reducing it is a goal for practical applications. Dirt and dust clearly cause emission sites in early conditioning, and this is the dominant effect in the low, <100 MV/m surface fields in superconducting cavities. But there seems to be a unique limiting gradient for each material – see next slide – which must have an explanation in the intrinsic properties of the material. But to go further, we need to look at what else happens when we have field emission to understand how we go from field emission to breakdown.

CLIC meeting – June 26 th, / 25 Conditioning curves of pure metals Antoine Descoeudres

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The breakdown trigger

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Now we are going to discuss the next step – how and why field emission evolves into a breakdown. The requirements for a low – – breakdown rate in a linear collider gives us a unique perspective on breakdown. (We have O(10 5 ) structures rf units in CLIC so if we don’t want to lose more than 1% luminosity to breakdown we have to have a breakdown rate of O(10 -7) ) We need to answer not just the question “Why does a surface breakdown?” but also “Why does it breakdown sometimes?” Trying to answer this question is leading us to new insights into the breakdown mechanism. Another look at the big picture…

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Charges collect at cathode non-uniformities under applied electric field [fs, nm] Local joule heating [ns,  m] Tensile electric stress [fs, nm] Field (and thermionic) emission Structure of surface modified under time/cycles [s, 10 7 pulses, nm] Thermal stress Field enhanced evaporation of neutrals Ionization ionization electrons are accelerated away from cathode [mm] Ions are accelerated towards cathode [  m] Ions strike cathode and kick out neutrals, ions and electrons Plasma spot forms [few ns, ’s of  m] Plasma sheath forms [  m] enhanced electron emission due to sheath potential and temperature surface melts due to ion bombardment [10-100’s of  m] Electron current accelerated in external field absorbs system energy [mm] (go to plasma dynamics) enhanced neutral emission, plasma feeding accelerates Breakdown trigger Avalanche starts Plasma feeding process Plasma dynamics Macroscopic energy transfer (from plasma feeding)

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The breakdown rate issue Let’s look at the dependence of breakdown rate on gradient. This is a standard plot for linear collider high-gradient tests and we also measure it in dc. E 29 ? Exponential? Very strong for sure. Having a practical goal, we also ask “How can we influence it?” To do this we need to understand the nature of the breakdown trigger but also the origin of its statistical nature.

Walter WuenschUkraine/CLIC collaboration visit June 2010 CERN/KEK/SLAC T18 structure tests SLAC 1 SLAC 2 KEK Lines are E 30 /BDR=const rf test results have been presented in detail at the X-band workshop, Monday morning, with a summary by S. Doebert on Wednesday morning.

CLIC meeting – June 26 th, / 25 Breakdown Rate : DC & RF (30 GHz) DCRF Cu Mo  = power in the fit BDR ~ E  Same trend in DC and in RF, but difficult to compare ‘slopes’

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 n.b. The breakdown rate over the long term is directly determined by the trigger mechanism but it can also be influenced indirectly by the damage caused by previous breakdowns. For example: more damage, higher , higher local surface field, higher breakdown rate. Lack of clarity in the distinction between what causes the breakdown and what the breakdown causes often results in confusion.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The two aspects of the breakdown trigger 1. How does the electric field pulse affect the surface when there is no breakdown? How does this surface modification lead to an increase the level of field emission to get to the critical value? Of course we would like to identify the origin of the enhanced emission in the first place. These steps are highlighted in yellow in the big picture. 2. What happens when you reach the critical value, what other physical processes to kick in? These steps are highlighted in blue.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Charges collect at cathode non-uniformities under applied electric field [fs, nm] Local joule heating [ns,  m] Tensile electric stress [fs, nm] Field (and thermionic) emission Structure of surface modified under time/cycles [s, 10 7 pulses, nm] Thermal stress Field enhanced evaporation of neutrals Ionization ionization electrons are accelerated away from cathode [mm] Ions are accelerated towards cathode [  m] Ions strike cathode and kick out neutrals, ions and electrons Plasma spot forms [few ns, ’s of  m] Plasma sheath forms [  m] enhanced electron emission due to sheath potential and temperature surface melts due to ion bombardment [10-100’s of  m] Electron current accelerated in external field absorbs system energy [mm] (go to plasma dynamics) enhanced neutral emission, plasma feeding accelerates Breakdown trigger Avalanche starts Plasma feeding process Plasma dynamics Macroscopic energy transfer (from plasma feeding)

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Evidence that  increases cumulatively from pulse to pulse, with breakdown occurring when a critical value is reached, can be see in the next slide. Breakdown rate comes from the growth rate of the surface features. Not to be forgotten that there are potentially many emission sites on a surface, so the story of our rf structure is not that of a single site. Please note that we are now entering an area of active research – I look to one of you to tell me the answer.

CLIC meeting – June 26 th, / 25 spark Evolution of  during BDR measurements (Cu) breakdown as soon as  > 48 ( ↔  · 225 MV/m > 10.8 GV/m) consecutive breakdowns as long as  >  threshold length and occurence of breakdown clusters ↔ evolution of   ·E = 10.8 GV/m Antoine Descoeudres

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The two main classes of ideas on how the surface evolves in a way that field emission increases are, 1. Tip growth – geometrical field enhancement factor becomes larger. 2. Dislocation movement – local work function becomes lower and atomic level surface geometry can change. Experimental evidence from this is on the next slide. It is quite possible that both processes occur.

CLIC meeting – June 26 th, / 25 Breakdown field of materials (after conditioning) In addition to other properties, also importance of crystal structure? reminder : Cu < W < Mo  same ranking as in RF tests (30 GHz) hcp bcc fcc fcc : face-centered cubic bcc : body-centered cubic hcp : hexagonal closest packing Antoine Descoeudres

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 More specifics on the ideas of breakdown rate 1.Geometric growth of the tips under induced stress, both electric field tension and thermal stress from emission current Joule heating. Crystal dislocations do act a nucleation points for whisker growth in certain conditions. 2.Accumulation of defects under stress, again both electric field tension and thermal stress - fatigue. Like in pulsed surface heating. Tips eventually form cracks and break off. 3.Defects are also areas of lower work function. This is very hard to calculate or measure (but I have the personal belief that this must be important). 4.Alternative - Migration of hydrogen atoms to the surface. Presence of hydrogen from the bulk could enhance evaporation and accelerate the trigger process. Clearer in next section.

IWLC 2010 Helga Timkó Oct. 21 st,  Presence of an electric field exerts a tensile stress on the surface  Presence of a near-to-surface void may trigger the growth of a protrusion Stage 3a: Onset of tip growth Submitted to PRB: Rapid Commun., A. S. Pohjonen, F. Djurabekova, A. Kuronen, and K. Nordlund, “Dislocation nucleation from near surface void under static tensile stress in Cu” Force Fixed atoms → F el STRESS = 0 E 2 /Y

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Wöhler curves for various types of copper relevant for rf cavities From Samuli Heikkinen Around 5% per decade! Stress goes as E 2

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Now what else starts to kick in as our emission sites evolve – back to the blue box in the big picture: 1.Field enhanced evaporation of neutrals – The field emission current densities give temperature rises near the melting point. Evaporation occurs. The applied field polarizes atoms in the crystal, pulls on them, and evaporation is enhanced. 2.Alternative explanation - Detachment of atomic clusters through a fatigue-like process – the electrostatic tensile force induced by 8 GV/m is of the order of the tensile strength of copper.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Electric field induced tensile force rewriting for our units The ultimate tensile strength of Cu is 220 Mpa and the measured  E is typically 8 GeV…

IWLC 2010 Helga Timkó Oct. 21 st,  Atoms move according to the Molecular dynamics algorithm, solving Newton’s equations of motion  In ED&MD hybrid code, due to the excess or depletion of electron density (atomic charge), we apply Gauss’s law to calculate the charges for the surface atoms ;  F loc is a solution of Laplace equation Thus, the motion of surface atoms is corrected due to the pulling effect of the electric field Stage 2: Hybrid ED&MD

IWLC 2010 Helga Timkó Oct. 21 st, Stage 2: Dynamics of electrons for temperature account  At such high electric fields, field emission is a non-negligible phenomenon  Electrons escaping from the surface with significant current will heat the sharp features on the surface, causing eventually their melting.  The change of temperature (kinetic energy) due to Joule heating and heat conduction is calculated by the 1D heat equation E max ↑E0↑E0 JeJe JeJe Results are submitted to Comput. Mater. Sci., S. Parviainen, F. Djurabekova, H. Timko, and K. Nordlund, “Implementation of electronic processes into MD simulations of nanoscale metal tips under electric fields “

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The situation gets out of hand

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 The crucial next step is that the liberated atoms are ionized by the field emission current that is accelerating away from the cathode. These positively charged ions then turn around and accelerate towards the surface, strike it and sputter away more atoms. We are now forming a plasma and the whole thing starts to run away. Currents rise orders of magnitude from p/nA to kA, we see light, X-rays, melt spots on the surface, capacitors discharge, rf power is absorbed etc. We would need more time to cover these stages of the breakdown. I can refer you to an excellent book called “Cathodic arcs” by Andre Anders.

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010 Charges collect at cathode non-uniformities under applied electric field [fs, nm] Local joule heating [ns,  m] Tensile electric stress [fs, nm] Field (and thermionic) emission Structure of surface modified under time/cycles [s, 10 7 pulses, nm] Thermal stress Field enhanced evaporation of neutrals Ionization ionization electrons are accelerated away from cathode [mm] Ions are accelerated towards cathode [  m] Ions strike cathode and kick out neutrals, ions and electrons Plasma spot forms [few ns, ’s of  m] Plasma sheath forms [  m] enhanced electron emission due to sheath potential and temperature surface melts due to ion bombardment [10-100’s of  m] Electron current accelerated in external field absorbs system energy [mm] (go to plasma dynamics) enhanced neutral emission, plasma feeding accelerates Breakdown trigger Avalanche starts Plasma feeding process Plasma dynamics Macroscopic energy transfer (from plasma feeding)

IWLC 2010 Helga Timkó Oct. 21 st, Corresponding to experiment...  1d3v electrostatic PIC-MCC code Resolving the main stream of plasma Areal densities of physical quantities Stage 4: Plasma evolution  Exponential voltage drop mimicked Limited energy from the circuit Cu r=1 mm d=20 μm ~ 4-6 kV Accepted for publication in Contrib. Plasma Phys., H. Timko, K. Matyash, R. Schneider, F. Djurabekova, K. Nordlund, A. Hansen, A. Descoeudres, J. Kovermann, A. Grudiev, W. Wuensch, S. Calatroni, and M. Taborelli, “A One-Dimensional Particle-in-Cell Model of Plasma Build-up in Vacuum Arcs”

IWLC 2010 Helga Timkó Oct. 21 st, Two conditions need to be fulfilled: (  scaling btw. DC and RF)  High enough initial local field to have growing FE current  Reaching a critical neutral density  ionisation avalanche  The sequence of events leading to plasma formation: ”Point of no return”: l mfp < l sys – corresponding to a critical neutral density ~ /cm 3 in our case  ionisation avalanche Under what conditions will an arc form? High electric field Electron emission, neutral evaporation Ionisation  e –, Cu and Cu + densities build up Sputtering neutrals

IWLC 2010 Helga Timkó Oct. 21 st,  Knowing flux & energy distribution of incident ions, erosion and sputtering was simulated with MD  Flux of ~10 25 cm -2 s -1 on e.g. r=15 nm circle  1 ion/20 fs Stage 5: Cathode damage due to ion bombardment H. Timko, F. Djurabekova, K. Nordlund, L. Costelle, K. Matyash, R. Schneider, A. Toerklep, G. Arnau-Izquierdo, A. Descoeudres, S. Calatroni, M. Taborelli, and W. Wuensch, “Mechanism of surface modification in the plasma-surface interaction in electrical arcs”, Phys. Rev. B 81, (2010)

IWLC 2010 Helga Timkó Oct. 21 st, μm 50 nm  Self-similarity: Crater depth to width ratio remains constant over several orders of magnitude, and is the same for experiment and simulation Comparison to experiment

Fifth International Linear Collider SchoolW. Wuensch 30 October 2010