ZPDA /ZPD-KI high accuracy pump dosing system ZPDA with VS gear box motor ready for use with FD bell housing, coupling (HBE) integrated counter high precision gear pump ZPDA (Beinlich) 3 lip block chamber manifold (Beinlich) integrated pressure and temperature controll bypass-port positive displacement gear flow meter VS (VSE) 2-chanel sensory NEW interpolation system for all flow meters available

ZPDA /ZPD-KI high accuracy pump dosing system gear box motor ready for FD bell housing, coupling (HBE) dosing pump ZPD (Beinlich) 3 lip block chamber version with running plates (KIS)

ZPDA /ZPD-KI high accuracy pump dosing system complete stainless steel, coatings or nitrated steel available outlet pressures up to 200 bar viscosity range from 10 cPs to 150’000 cPs displacements : size 1 housing: 0,1; 0,3; 0,6; 1,2; 1,8; 2,4; 3,0; 4,8; 6,0; 10,0 cc/rev size 2 housing: 10,0; 12,0; 16,0; 20,0; 22,0; 26,0 cc/rev built as ZPDA adaptable or as “KI” version with running plates all pumps with speed indicator – mounted in the bell housing – available used as ZPDA available with manifold and directly mounted flow meter of VSE

Special marks for ZPDA packing glands 3 lip block chamber variable shaft sealant systems for: packing glands 3 lip block chamber mechanical contact seal swift mounting and demounting, short break down times same shaft sealing construction for all pumps in the same housing size; minimized spare part storage connecting via bell housing all pumps available with mag-drive (DST) inlet and outlet ports in the back-plate alternatively -standard manifold (optional with foot bracket) or -customised manifold (e.g. available with integrated ports of pressure or temperature control and/or by-pass function)

Special marks for ZPDA - 15 bar standard inlet pressure mechanical contact seal - 15 bar standard inlet pressure - combination with block chamber in FKM - Face SISIC / SISIC (Ceramics) 3 lip block chamber 10 bar standard inlet pressure PTFE lip seal ring to the medium FKM seal rings creating a block chmaber made as a “run through” block chamber which is flushable

Special marks for ZPDA packing glands 50 bar standard inlet pressure combined with a lip seal rings in FKM to create a block chamber with a central taper to maintain through the bell housing magnetically coupling 25 bar standard inlet pressure With a easy to handle and to align by using a HBE bell housing available in DST standard sizes

Advantages of ZPDA • Beinlich Pump Systems; Germany + wide displacement range + well known for customised solutions + knowledge of customer needs + application knowledge + can work on sub-systems: mag-drives (DST), flow-meter (VSE), gear boxes/motors,... + international team for sales and service with partners. + able to work in higher viscosities with ZPD KIS range + small administration with high flexibility

THANKS YOU FOR YOUR INTEREST !!!