MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 1 Timing Analysis for the Page w/Channel Assignment Feature TSG-C SWG 2.3 SOURCE: TITLE: ABSTRACT: RECOMMENDATION: ©2003 Motorola, Inc. Motorola grants a free, irrevocable license to 3GPP2 and its Organizational Partners to incorporate text or other copyrightable material contained in the contribution and any modifications thereof in the creation of 3GPP2 publications; to copyright and sell in Organizational Partner's name any Organizational Partner's standards publication even though it may include all or portions of this contribution; and at the Organizational Partner's sole discretion to permit others to reproduce in whole or in part such contribution or the resulting Organizational Partner's standards publication. Motorola is also willing to grant licenses under such contributor copyrights to third parties on reasonable, non-discriminatory terms and conditions for purpose of practicing an Organizational Partner’s standard which incorporates this contribution. This document has been prepared by Motorola to assist the development of specifications by 3GPP2. It is proposed to the Committee as a basis for discussion and is not to be construed as a binding proposal on Motorola. Motorola specifically reserves the right to amend or modify the material contained herein and to any intellectual property of Motorola other than provided in the copyright statement above. C This contribution contains the Motorola response to action items received during the discussion of contribution C during the May 5 th SWG23 conference call. FYI Sean Kelley ;

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 2 Background In C , Qualcomm proposed Page w/Channel Assignment, where the MS goes directly to the Traffic Channel without sending a page response. In C , Motorola proposed a RESPONSE_IND field for the Page w/Channel Assignment, to indicate to the mobile whether or not a page response is required. The values of RESPOND_IND are as follows: –’00’: MS does not send page response (i.e. same as Qualcomm proposal) –’01’: MS must send page response, in assured mode –’10’: MS must send page response, in unassured mode The page response is useful if the BS wants early confirmation that the MS is “present”, while still reducing call setup time –Page response on access channel is currently significantly faster than TCH acquisition QUESTION: what is the relative benefit of ’10’ compared to ’01’?

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 3 Typical MS Terminated Call General Page Message BS Acknowledgment Order Extended Channel Assignment Message MS Acknowledgment Order Page Response Message 0 ms 290 ms 483 ms 1063 ms TCH Acquisition mobile stationbase station 1092 ms 210 ms 1023 ms

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 4 Assumptions Two important metrics: – “Call Setup Time”: Time for MS to arrive on Traffic Channel, defined here to be the time from the MS receiving the GPM to the MS receiving the BS Ack Order on the traffic channel –“MS Declared Present”: Time when BS has sufficient information to declare MS “present”, defined here to be the time from the MS receiving the GPM to the time the BS either successfully receives the PRM or the BS Ack Order being sent on the F- TCH, whichever event comes first MS time stamps used in the analysis are average values derived from mobile logs ATime from MS receiving GPM to BS receiving PRM (assumption: transmitting BS Ack Order takes 80 ms) 210 ms BTime from MS receiving GPM to MS receiving BS Ack Order on PCH290 ms CTime from MS receiving GPM to MS receiving ECAM483 ms DTime from MS receiving ECAM to MS receiving BS Ack Order on F-TCH580 ms EAccess probe retransmission delay (assumption: ACC_TMO = 1, PAM_SZ = 2, MAX_CAP_SZ = 3, ACH_SZ = 4) 540 ms FTime from MS receiving ECAM to BS acquiring TCH preamble (assumption: transmitting BS Ack Order takes 40 ms) 540 ms

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 5 Comparison No Page w/ECAM ’00’ no PRM ’01’ assured PRM ’10’ unassured PRM “Call Setup Time” 1063 ms C+D 580 ms D 870 ms B+D 790 ms A+D 1 st probe failed, 2 nd probe OK 1603 ms C+D+E 1410 ms C+D+E “MS Declared Present” 210 ms A 540 ms F 210 ms A 750 ms A+F 1 st probe failed, 2 nd probe OK 750 ms A+E 750 ms A+E

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc PAGE 6 Observations For “MS Declared Present”, page response modes (’01’ and ’10’) are 330 ms faster than no page response mode (’00’) –Page response modes still improve call setup time, but without delaying “MS Declared Present” indication –Page response mode should be available as an option For the two page response modes, unassured mode (’10’) outperforms assured mode (’01’) –Unassured mode (’10’) is the best option for when fast “MS Present” indication is needed Slightly slower than assured mode for “1 st probe failed / 2 nd probe successful” case, only because current TCH acquisition delay is slightly longer than probe retry delay Also saves PCH capacity –Assured mode (’01’) should also be included for cases where page response is absolutely needed