Plug And Play Portable Inspection System The Easy Choice for Visual Quality Press Enter to continue

Green Design By removing motors and blower units as well as incorporating an LED light source eliminating wasteful incandescent light bulbs, this decreases power consumption and makes it much more environmentally friendly. Low Cost Affordable, High-Speed, and Accurate visual inspection has not been obtainable until now. The PAPPIS is high speed, high accuracy, and is the first system specifically designed to provide a low cost alternative to your inaccurate and timely manual inspection. Press Enter to continue

System Overview Without the use of complicated mechanical flipping systems or unstable and slow belt conveyance, we can easily inspect both top and bottom of your product by simply gliding it down a layer of angled, clear, tempered glass.  Cascade and Glide Transfer System Your bulk product is placed into a hopper and the first vibratory feeder transfers the product to a separator plate. This plate separates the product into four rows using a secondary vibratory feeder for additional stability at the transfer point. All four rows cascade off of the vibratory feeder and uses gravity to glide down a sheet of tempered glass for inspection. Press Enter to continue

 Inspection System The PAPPIS uses 4 LED lighting units to illuminate the product and 8 high resolution CCD Area sensor cameras for inspection (top and bottom of each row). Inspection is applied to both the top surface and bottom surface at the same time. Press Enter to continue

 Compact Design Taking into consideration the rising cost of factory floor space, this system does not require a specially designed room or premium floor space for operations. With a small footprint and light design, the system is placed on casters and can be rolled to any location and simply plugged into a standard 120 volt outlet. Once plugged in, the PAPPIS is ready for your product.  Cleaning and Maintenance The sleek and simple design of the PAPPIS affords easy cleaning, setup, and operations. With No Moving Parts, it eliminates the need for difficult mechanical adjustments or parts to break down. Press Enter to continue

 Changeover When changing from one product range (see below) to another, the operator simply removes the existing separator and guide plates and replaces with a different size. Since the PAPPIS maintains your process parameters in memory, the operator then calls up the new parameters, inputs the product, and starts inspection.  Changeover plates for different sizes  mm round and mm wide oblong  mm round and 8 – 10 mm wide oblong  10 – 12 mm round and 10 – 12 mm wide oblong  12 – 15 mm round and 12 – 15 mm wide oblong Press Enter to continue

Press Enter to continue

Standard Specifications Model: PAPPIS ItemSpecifications Inspection functions Applicable tablets Non-coated, film coated, sugar-coated tablets, Printed, engraved, break line tablets, Round, oblong, oval tablets, Capsules, and other shapes Tablets size Round tablets: 5-12mm in diameter Oblong & Oval tablets: 5-12mm in width, 5-21 mm in length Inspected items Dirt inspection: Foreign particle, Dirt, Scratches Shape inspection: Dimensions, Cracks, Deformation Color inspection: Wrong color, Discoloration, Peeled coating Print inspection: Scratches, Blurring, Lack of printing Inspected surfaces Top & bottom Inspection precision Defective equivalent to a 100 μm square or larger black speck Processing capacity 200,000 Tablets/Hour (Round tablets: 8mm in diameter) Hardware Inspection Subsystem Lighting unit4 LED units CameraCCD area sensor camera ×8 CommunicationMicrosoft Windows Xpe Judgment processing unitFPGA, Signal processing board Transfer Subsystem HopperCapacity:15L Vibratory feederTransfer capacity: 5000 tablets/min max Alignment chuteSpecial shape plastic guides Glass tableTempered glass Rejection Subsystem Rejector valvePneumatic Valve Defective tablet collection boxCapasity:15L Software Inspection Functions Individual and overall Judgment, inspection condition entry, result output Diagnosis Functions Monitoring of hardware, self diagnosis Size & Environment Dimensions W1,000mm×D600mm×H1417 (excluding patrol lamp) Power Supply AC100V Pressure of pneumatic unit 0.35 ～ 1.00Mpa Ambient conditions Temperature; 10 ～ 30 ℃, Humidity: 30 ～ 70% (Non-condensing) Exterior Stainless steel Press Enter to continue

Glass Plate Separator Plate Camera Camera Defective BinGood Bin Vibratory Feeder1 Trough Vibratory Feeder2 4 LED Lighting Units Hopper Press Enter to continue

Glass Defective tablets will be blown by air into the Defective Row 4 Inspection Rows Press Enter to continue

Human Inspection Press Enter to continue

PAPPIS Inspection No Eye StrainNo FatigueNo BreaksNo Sick DaysNo Mistakes “No Mistakes” Press Enter to continue

DefectsGood Press Enter to continue

Press Enter to continue

Symetix New Compact Verisym System Length 10 Feet Width 38 Inches Viswill’s PAPPIS Length 39 Inches Width 23 Inches 1 3,000 p/m 2 3,000 p/m 3 3,000 p/m 4 3,000 p/m 5 Press Enter to continue

Proditec Visitab 2 System Doors Closed Length 9 Feet 3 inches Width 33 Inches Viswill’s PAPPIS Length 39 Inches Width 23 Inches Press Enter to continue

Proditec Inspectab 100 System Length 6 Feet 5 inches Width 30 Inches Viswill’s PAPPIS Length 39 Inches Width 23 Inches 123 Doors Closed Doors Open Width 6 Feet 7 Inches Press Enter to continue

Proditec Inspectab 100 System 23 Doors Open Width 6 Feet 7 Inches Press Enter to continue

QC Lab Tablet Press Packaging Portable for All of your Needs! CoatingPrinting Press Enter to continue

Development Lab Tablet Press Packaging CoatingPrinting Storage when not In use Press Enter to continue

For Additional Information or to set up a Presentation for the PAPPIS, please contact: Rusty Nelson General Manager Daiichi Jitsugyo (America), Inc. Phone: English Website: Spanish Website: