Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT PWI activities at CIEMAT (Madrid) presented by F. Tabarés Laboratorio Nacional de Fusión por Confinamiento.

Slides:

Advertisements

Similar presentations

1 Th LoarerGas balance and fuel retention – EU TF on PWI – 13 November 2006 Th Loarer with contributions from C. Brosset 1, J. Bucalossi 1, P Coad 2, G.

Advertisements

How to do wall conditioning in ITER ? # B tor cycles is limited GDC inefficient in B Drawbacks of ECWC, Taylor Ion cyclotron wall conditioning (ICWC) J.

Laboratorio Nacional de Fusión FL Tabarés et al. EU PWI TF..CIEMAT Oct Lithium-coated walls on plasma performance in FTU and in TJ-II F.L. Tabarés,

EU PWI TF- 7th General meeting –Frascati /10/2008 PWI aspects of the FAST (Fusion Advanced Studies Torus) project Presented by G. Maddaluno Outline.

Report IPP Garching EU Task Force PWI Meeting, Cadarache Oct Max-Planck-Institut für Plasmaphysik compiled by Arne Kallenbach (IPP - EU-PWI.

EU Plasma-Wall Interaction TF – Meeting Frascati SEWG Erosion & Transport S. Brezinsek Institut für Energieforschung –Plasmaphysik.

EU-PWI TF meeting, Caderache, October 2005 Progress with T-recovery techniques P Coad 1, GF Counsell 1, G. Dinescu 6, H. G. Esser 4, JA Ferreira.

A new look at the specification of ITER plasma wall interaction and tritium retention J. Roth a, J. Davis c, R. Doerner d, A. Haasz c, A. Kallenbach a,

1 3rd meeting Working Group 5. 2 Agenda WG5 2nd Meeting Agenda: Discuss existing proposals Indicate missing proposals Allocate persons to develop proposals.

ITER & dust Dust = major issue in term of ITER safety In vessel dust quantities: extrapolation from current experiments In vessel dust diagnostics & removal.

Alberto Loarte EU Plasma-Wall Interaction Task Force Meeting – Jozef Stefan Institute – 11 – Report on EU-PWI SEWG on Transient Loads Alberto.

PWI Modelling Meeting – EFDA C. J. OrtizCulham, Sept. 7 th - 8 th, /8 Defect formation and evolution in W under irradiation Christophe J. Ortiz Laboratorio.

Lithium Sputtering studies in TJ-II Specific diagnostics: -Li emission at 671nm at the edge Rel. Calibrated in situ -6 H monitors -Array of Li+ emmision.

Th Loarer - SEWG on Fuel retention – JET, July Th Loarer with special thanks to S Brezinsek, J Bucalossi, I Coffey, G Esser, S Gruenhagen.

WP10-PWI (02)/TEKES/BS(PS) Characterization of retention mechanisms in AUG Monitoring meeting of the EFDA PWI SEWG on Gas Balance and Fuel Retention,

1Annual meeting SEWG Transient Heat Loads, Ljubljana, 1 st /2 nd October 2009 TORE SUPRA Association Euratom-CEA J. Bucalossi Report on Tore Supra activities.

SEWG Meeting HIGH-Z, Ljubljana, October 2009 I. Tungsten distribution on limiters after WF 6 injection in TEXTOR II. SEM and EDX of Melted Tungsten Rods.

ERO modelling of local 13 C deposition at the outer divertor of JET M. Airila, L. Aho-Mantila, S. Brezinsek, P. Coad, A. Kirschner, J. Likonen, D. Matveev,

Experiments about carbon removal and codeposit inhibition J.A. Ferreira, F.L. Tabarés, W. Bohmeyer and A. Markin, I. Tanarro, V. Herrero.

EU-PWI TF meeting, Ljubljana, November 2006 Progress with tritium removal and mitigation G Counsell 1, D Borodin 4, P Coad 1, J Ferreira 8,

K. Krieger, SEWG Meeting on Material Migration and ITER Material Mix, JET, Max-Planck-Institut für Plasmaphysik Carbon local transport and redeposition.

SEWG Fuel Retention July 2008 © Matej Mayer Fuel retention in ASDEX Upgrade tungsten coatings M. Mayer, M. Balden, K. Krieger, S. Lindig, O. Ogorodnikova,

CIPS SEWG FR, JET 2008C. Hopf O 2 /He glow discharge cleaning: Experience at IPP Christian Hopf, Volker Rohde, Wolfgang Jacob Max-Planck-Institut für Plasmaphysik.

Kazuyoshi Sugiyama, SEWG meeting on Fuel retention, Garching, July Contribution of Boron on the D retention in the AUG full-W wall regime Max-Planck-Institut.

Tungsten distribution on limiters after WF 6 injection in TEXTOR M. Rubel, D. Ivanova Alfv é n Laboratory, Royal Institute of Technology, Association EURATOM.

1. Qualifying carbon as PFC Erosion (see report S. Brezinsek ) along plasma wetted areas, effect of substrate Local C migration to gaps Fuel retention.

V.Philipps, SEWG Gas balance and fuel removal, JET, , Association EURATOM – FZJ Effect of disruptions on fuel release from JET walls V. Philipps,

TFE Th Loarer – SEWG – 12 September Euratom Th Loarer V Philipps 2, J Bucalossi 1, D Brennan 3, J Brzozowski 4, N Balshaw 3, R Clarke 3, G Esser.

1B. PégouriéDITS progress report 27/04/07 Euratom EXPERIMENTAL CAMPAIGN No reliable estimation of the wall inventory WI ~ ??? D atoms (Tsitrone,

FOM-Institute for Plasma Physics Rijnhuizen Association Euratom-FOM T E CT E C T E CT E C Carbon Chemical Erosion Yield Experiments in Pilot-PSI Jeroen.

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Chemical Erosion Research at CIEMAT (Madrid) presented by F. Tabar é s Laboratorio Nacional de.

Member of the Helmholtz Association Institute of Energy Research – Plasma Physics | Association EURATOM – FZJ A. Litnovsky et al., Progress report on the.

Alberto Loarte EU Plasma-Wall Interaction Task Force Meeting – CEA – Cadarache 17 – 10– EU-PWI Task Force & EFDA Plasma Edge Technology Programme.

1E. Tsitrone PWI TF meeting, 27-29/10/2008, Frascati Euratom International context : ITPA (International Tokamak Physics Activity) Changes in the ITPA.

Member of the Helmholtz Association Carbon based materials: fuel retention and erosion under ITER-like mixed species plasma conditions Arkadi Kreter et.

1SEWG Fuel removal - Glow improvement for JET D. Douai22-23 July 2008 EFDA Task Glow discharge improvement for JET D. Douai 1, D. Garnier 1, S. Brémond.

1E. Tsitrone PWI TF meeting, 27-29/10/2008, Frascati Euratom 2009 WP for the PWI TF : Tasks agreements and priority support The EU PWI TF under new EFDA.

EU Plasma-Wall Interaction TF – Meeting – SFA Ljublijana SEWG Chemical Erosion S. Brezinsek EU Plasma-Wall Interaction TF – Meeting

R. Doerner, EU SEWG meeting, JET. July 9-10, 2007 Co-deposition/Co-implantation R. Doerner, M. Baldwin, G. De Temmerman, D. Nishijima UCSD K. Schmid, Ch.

6 th EU PWI TF Meeting Madrid, Oct Tritium Inventory in ITER: Laboratory data and extrapolation from tokamaks Th Loarer, J Roth, S Brezinsek, A.

1 Stocks of biomass / C soil organic matter Expert meeting on land use and Ecosystem accounting 18./

Wildfire Emission Modelling in GEMSJ. Kaiser IGBP-QUEST Fire Workshop, Exeter, October 2005Slide 1 Wildfire Emission Modelling in GEMS Johannes Kaiser.

Circumstellar disks: what can we learn from ALMA? March ARC meeting, CSL.

1 Primary Research of Massive Gas Injection for Disruptions Mitigation on HT-7 H.D. Zhuang X.D. Zhang Y.Zhang Institute of Plasma Physics. CAS

Lets play bingo!!. Calculate: MEAN Calculate: MEDIAN

1 First EMRAS II Technical Meeting IAEA Headquarters, Vienna, 19–23 January 2009.

LECTURE 12 AOSC 434 AIR POLLUTION RUSSELL R. DICKERSON.

11 CRYOPLASMA IN HELIUM INDUCED BY CORONA DISCHARGE N. Bonifaci, F. Aitken, G2Elab Grenoble, France V Atrazhev, Joint Institute for High Temperatures,

1 Chapter 2Energy and Matter 2.6 Changes of State Copyright © 2005 by Pearson Education, Inc. Publishing as Benjamin Cummings.

1 ITPA - DSOL - TorontoS. Brezinsek TEC Hydrocarbon spectroscopy on EU tokamaks S. Brezinsek on behalf of the EU task force for Plasma-Wall Interaction.

Recent JET Experiments and Science Issues Jim Strachan PPPL Students seminar Feb. 14, 2005 JET is presently world’s largest tokamak, being ½ linear dimension.

1Th LoarerGas balance and fuel retention – IAEA Chengdu – 18 October 2006 TEC Euratom Th Loarer with contributions from C. Brosset 1, J. Bucalossi 1, P.

Parallel and Poloidal Sheared Flows close to Instability Threshold in the TJ-II Stellarator M. A. Pedrosa, C. Hidalgo, B. Gonçalves*, E. Ascasibar, T.

Comparative Study of Diamond- like Carbon Films Deposited from Different Hydrocarbon Sources Se Jun Park, Kwang-Ryeol Lee Future Technology Research Division.

HU Berlin Plasmaphysik The Scavenger Effect - does it work? W. Bohmeyer* a,d, F.L. Tabares b, M. Baudach a,g, A. Cwiklinski e, T. Schwarz-Selinger g, A.

Laboratorio Nacional de Fusión 1/13 CLEANING EFFICIENCY OF CARBON FILMS BY OXYGEN PLASMAS IN THE PRESENCE OF METALLIC GETTERS Francisco L. Tabarés, J.A.

Laboratorio Nacional de Fusión F. L. Tabarés 15th ADAS Workshop 3-6 Oct Armagh. North Ireland Laboratorio Nacional de Fusión AMP issues in TJ-II.

B WEYSSOW 2009 Coordinated research activities under European Fusion Development Agreement (addressing fuelling) Boris Weyssow EFDA-CSU Garching ITPA 2009.

METO 621 CHEM Lesson 4. Total Ozone Field March 11, 1990 Nimbus 7 TOMS (Hudson et al., 2003)

The Stellarator Reactor Steady State operation OK Power loadsNo disruptions, no Type I ELMs High E confinementH modes High neNo Greenwald density limit.

Overview of TJ-II experiments Presented by Joaquín Sánchez Laboratorio Nacional de Fusión, EURATOM-CIEMAT, Spain Institute of Plasma Physics, NSC KIPT,

1 ITC-22, November 2012, Toki, Japan 1 Modelling of impurity transport, erosion and redeposition in fusion devices: applications of the ERO code A. Kirschner.

Carlos Hidalgo Laboratorio Nacional de Fusión CIEMAT Madrid, Spain

L-H power threshold and ELM control techniques: experiments on MAST and JET Carlos Hidalgo EURATOM-CIEMAT Acknowledgments to: A. Kirk (MAST) European.

ITERに係わる原子分子過程 Atomic and Molecular Processes in ITER SHIMADA, Michiya ITER International Team Annual Meeting of Japan Society of Plasma Science and Nuclear.

ITER consequences of JET 13C migration experiments Jim Strachan, PPPL Jan. 7, 2008 Modeled JET 13C migration for last 2 years- EPS 07 and NF paper in prep.

Rarefied vapor modelling for a closed liquid metal pool-type divertor

[EX / P7-8] 27th IAEA Fusion Energy Conference – J. Jang, et. al

Quasi-steady-state conditions in JET-ILW:

Presentation transcript:

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT PWI activities at CIEMAT (Madrid) presented by F. Tabarés Laboratorio Nacional de Fusión por Confinamiento Magnético Asociación EURATOM/CIEMAT. Madrid.Spain EU-PWITF. Ljubljana Nov. 2006

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT OUTLINE -Wall conditioning of TJ-II -Carbon erosion studies in TJ-II - Particle transport studies in TJ-II - Removal/inhibition of carbon co-deposits -Scavengers: Laboratory studies JET experiments -Oxidation, plasma assisted techniques -Wall conditioning of TJ-II -Carbon erosion studies in TJ-II - Particle transport studies in TJ-II - Removal/inhibition of carbon co-deposits -Scavengers: Laboratory studies JET experiments -Oxidation, plasma assisted techniques

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Wall conditioning of TJ-II TJ-II Stellerator (R=1.5 m, a <0.23 m, B=1T) Boronisation at beginning of the exp. campaign 4 gr o-carborane in He GD B/C ~ 50nm He (Ne) GD 30 min at beginning of experimental day. ECRH plasmas (up 600 kW): good impurity control (Z~1) and acceptable density control. NBI plasmas (up 400 kW): uncontrolled increase of density We need a good H 2 and O 2 getter Lithium coating TJ-II Stellerator (R=1.5 m, a <0.23 m, B=1T) Boronisation at beginning of the exp. campaign 4 gr o-carborane in He GD B/C ~ 50nm He (Ne) GD 30 min at beginning of experimental day. ECRH plasmas (up 600 kW): good impurity control (Z~1) and acceptable density control. NBI plasmas (up 400 kW): uncontrolled increase of density We need a good H 2 and O 2 getter Lithium coating

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT First test of Lithium coating 4 Lithium ovens: 2 fixed (side windows) and 2 in retractable manipulators (top windows) 1 gr of Li per oven, heated to ~600 ºC during Ne GD Emission of Li injected from a retractable oven Emission of Li injected from a retractable oven

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT First test of Li coating Problems: -Lack of good temp. control in the inserted ovens: strong asymmetry of deposited Li. -Accidental venting of TJ-II with N 2. Production of Li 3 N ?? Results: ECRH plasmas (N plasmas?) with a poor density control. Very low H fuelling required Next campaign: 4 fixed oven. More lab. work in order to improve the coating: Li + He/Ne GD (simultaneous or consecutive) Problems: -Lack of good temp. control in the inserted ovens: strong asymmetry of deposited Li. -Accidental venting of TJ-II with N 2. Production of Li 3 N ?? Results: ECRH plasmas (N plasmas?) with a poor density control. Very low H fuelling required Next campaign: 4 fixed oven. More lab. work in order to improve the coating: Li + He/Ne GD (simultaneous or consecutive)

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT C-film formation and erosion in TJ-II CH 4 and C 2 H 4 have been injected at the plasma edge using a mobile, instrumented limiter, producing local C-films. Identical (reference ) limiter at 180 º(PSI-2006 to appear J. Nucl. Mat.) -C 2 H 4 presents much lower fuelling efficiency than H 2 -C 2 H 4 yields only a 15% of H /Hatom compared with H 2 -CH/H 3x higher in C 2 H 4 vs CH 4 -C 2 H 4 presents much lower fuelling efficiency than H 2 -C 2 H 4 yields only a 15% of H /Hatom compared with H 2 -CH/H 3x higher in C 2 H 4 vs CH 4 -C 2 H 4 injection produced C-layers with high H content (from particle balance) -No difference in erosion between methane/ethylene layers -Physical sputtering dominant -C 2 H 4 injection produced C-layers with high H content (from particle balance) -No difference in erosion between methane/ethylene layers -Physical sputtering dominant Results

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Erosion of local C-layers Comparison of erosion of the deposited films by plasmas fed by limiter puffing or by machine puffing Comparison of erosion of the deposited films by plasmas fed by limiter puffing or by machine puffing Global contamination of the full wall Global contamination of the full wall Higher erosion by plasmas feed away for the limiter Higher erosion by plasmas feed away for the limiter

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Other studies in TJ-II Transport Studies Implementation of EIRENE code to the TJ-II geometry By J. Guasp & A. Salas. Applications: -Simulation of He ECRH plasma using He emission lines of 3 different. Neutral profiles obtained. (EPS-2006) -H profile modeling. (E. de la Cal PSI-2006). Diagnostics Testing of He C-R model by a supersonic He beam. Sensitivity of model to rate constant uncertainties Use of LIF for change population in collisional-coupled levels and estimate the rates of transition with n=0. (A. Hidalgo et al. PPCF 48 (2006) 527. Transport Studies Implementation of EIRENE code to the TJ-II geometry By J. Guasp & A. Salas. Applications: -Simulation of He ECRH plasma using He emission lines of 3 different. Neutral profiles obtained. (EPS-2006) -H profile modeling. (E. de la Cal PSI-2006). Diagnostics Testing of He C-R model by a supersonic He beam. Sensitivity of model to rate constant uncertainties Use of LIF for change population in collisional-coupled levels and estimate the rates of transition with n=0. (A. Hidalgo et al. PPCF 48 (2006) 527.

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Modeling of He plasmas by EIRENE in TJ-II -EIRENE neutral code (2) adapted to TJ-II geometry: First case M trajectories for neutral He followed. - Statistical uncertainty 3% in the He line ratios. - He line ratios insensitive to most of the model parameters. - He line ratios very sensitive to ne and Te edge profiles - Edge profiles adjusted, inside the experimental error limits, for the best fitting. The edge profiles from Thomson Scattering and He-beam in H plasmas are a starting point for the simulation Dotted lines: exp. error limits (20%) Continuous lines: statistical uncertainty of EIRENE (3%) Edge parameters: ne=1.09x10 12 cm -3, Te= 41 eV Good Fitting with smooth edge profiles Neutral profiles: Absolute calibration of 667 nm He line (error 50%) Adjust parameters: Ne(a) = 1.09x10 12 cm -3 ( 8%) Te(a) = 41 eV ( 4%) Ti(0) = 80 eV ( 24%) Ti(a) = 25 eV ( 10%) He + /He ++ = 90% ( 10%) p = 5.6 ms ( 20%)

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Validation of the C-R model for He in a supersonic He beam in TJ-II Supersonic He beam diagnostic: Edge profile and Validation of C-R model -a) Comparison with reflectrometry, Li beam and TS--> density profile - b) Comparison with ECE Langmuir probes and TS--> temperture profile -c) Self consistency: reproduction of full emission radial profile emiss.(nm)

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Removal Techniques Film scavengers: Complete suppression of C-film deposition in technical plasmas by addition of some reactive gases: N 2, NH 3, CNH, SH 2, etc… Suppression of C deposition in CH 4 /N 2 /H 2 (10:0-10:80) GD (PPCF 44 (2002) L37) N 2 injection on sub-divertor ASDEX-Up: suppression of C re-deposition (Nucl. Fusion 45 (2005) L27) N 2 sub-divertor injection tested in JET: Nov Film scavengers: Complete suppression of C-film deposition in technical plasmas by addition of some reactive gases: N 2, NH 3, CNH, SH 2, etc… Suppression of C deposition in CH 4 /N 2 /H 2 (10:0-10:80) GD (PPCF 44 (2002) L37) N 2 injection on sub-divertor ASDEX-Up: suppression of C re-deposition (Nucl. Fusion 45 (2005) L27) N 2 sub-divertor injection tested in JET: Nov. 2006

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Mechanism of C-film inhibition Cryogenic Trap Assisted Mass Spectrometry (CTAMS) 1-pumping system7-diaphragm 2-B-A manometer8-mass spectr. 3-Cap. Manometer9-optic port 4-cutting valve10-manipulator 5-gas inlet11-cryogenic trap 6-anode12-float V measure 1-pumping system7-diaphragm 2-B-A manometer8-mass spectr. 3-Cap. Manometer9-optic port 4-cutting valve10-manipulator 5-gas inlet11-cryogenic trap 6-anode12-float V measure Vapor pressure vs. T for different species Vapor pressure vs. T for different species J.A. Ferreira et al. PFMC-11. Griefswald IAEA. Chengdu 2006 Submitted: J.Vac.Sci.Tech. Chem Vap. Dep. J.A. Ferreira et al. PFMC-11. Griefswald IAEA. Chengdu 2006 Submitted: J.Vac.Sci.Tech. Chem Vap. Dep.

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT CTAMS results CH 4 /N 2 /H 2 (10:10:80) plasma N 2 /H 2 (20:80) plasma condensation release Main product: acetylene Main product: acetylene Main product: HCN Main product: HCN

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT CTAMS summary Proposed mechanism: Proposed mechanism:

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT JET experiments ( Nov.06) Three scenarios: - SP low Horizontal+ Type I ELMs,GIM 11, Q< e/s - SP low Horizontal-sweep + Lmode,GIM 11, Q< e/s - SP low Vertical + Type I ELMs,GIM 11 Q< e/s N2N2 N2N2

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT JET experiments ctnd N2 in H mode L mode No significant effect seen with SP at low tile 3 either (H mode) Compatibility of toroidal injection with Type I ELM for required N 2 fluxes at JET??? try local injection with AUG fluxes(extrapolated)

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT Removal of a-C:H in gaps Plasma etching in castellated structures (1mm wide x3mm deep) Plasma etching in castellated structures (1mm wide x3mm deep) Etching rates Deduced by full annealing (TDS) before and after plasma exposure: He/O 2 (20%): 12 nm/min H 2 /N 2 (20%): 3.6 nm/min B/C films: much lower rates Etching rates Deduced by full annealing (TDS) before and after plasma exposure: He/O 2 (20%): 12 nm/min H 2 /N 2 (20%): 3.6 nm/min B/C films: much lower rates Similar rates if C-coated elements were facing the bottom of the chamber where only a weak plasma was detected (LP) Similar rates if C-coated elements were facing the bottom of the chamber where only a weak plasma was detected (LP) Atomic O, surviving after a few collisions with the walls, is the responsible of cleaning. Atomic O, surviving after a few collisions with the walls, is the responsible of cleaning. J.A. Ferreira et al. 12-ICFRM. Sta. Barbara To appear in J. Nucl. Mater. J.A. Ferreira et al. 12-ICFRM. Sta. Barbara To appear in J. Nucl. Mater.

Laboratorio Nacional de Fusión Asociación EURATOM-CIEMAT C-studies (future-2007) CD,C 2, He beam emission (pulsed) -Chemical sputtering of doped graphite (metal carbides) (in collaboration C. Garcia-Rosales) TJ-II NBI Plasma C doped C Methane/He injection Holder: rotable, radial displacement