Self Guided Tour of TagMate™QC Display Tag DATA Tag Data: PRINT TagMate™QC SETUP Display STATS Tags: START and READ SEND All Data to PC Additional Capabilities ® V 3.2

Click here to turn on the TagMate™QC Turning on the TagMate™QC This is what the screen looks like just after pressing the ON button After turning on TagMate™QC, this will be the default screen displayed Main Menu

Click on SELECT to review DATA – goes directly to most recent tag data in the sequence DATA Selected Main TagMate™QC Menu: DATA Click here to READ a tag ( active on all DATA Screens) Click here to SEND all data records to PC computer by IR link Click on Arrows (  or  ) for SETUP or STATS After turning on TagMate™QC, the DATA mode is automatically selected first Main Menu

DATA Selected For selected tags, displays tag number, ON/OFF status, current temperature, number of data points, and number of active alarms Data Screen 1 Temperature when tag was READ Main Menu

DATA Selected For selected tags, displays tag number, ON/OFF status, current temperature, number of data points, and number of active alarms Data Screen 1 Temperature when tag was READ Main Menu

Displays which alarms are active Active alarm type will blink on screen (T max in this example) Data Screen 2 Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer DATA Selected Main Menu

Displays the contents of the Info Field Data Screen 3 DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Displays remaining shelf life in days and compares to Setting Flashes if shelf life is less than Setting (example shown here) Shelf Life Screen (Option) DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Compares actual measured T max with pre-set T max setting Alarm value will blink (example shown here) Data Screen 4 DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Displays Time Over Temperature time value and compares it with the alarm setting DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu Data Screen 5

Compares actual measured Tmin with pre-set Tmin setting Alarm value will blink Data Screen 6 DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Displays Time Under Temperature time value and compares it with the alarm setting Data Screen 7 DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Compares actual measured Tavg* with pre-set Tavg* setting Alarm value will blink Data Screen 8 * If MKT was selected, MKT values are displayed in this screen DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Compares actual measured Tavg* with pre-set Tavg* setting Alarm value will blink Data Screen 9 * If MKT was selected, MKT values are displayed in this screen DATA Selected Click on SELECT to view next DATA screen Click on Arrows (  or  ) to go to other tag data records Click to PRINT a chart using MP-1 printer Main Menu

Displays Start Date and Start Time for the selected tag Data Screen 10 DATA Selected Click on SELECT to view next DATA screen Click to PRINT a chart using MP-1 printer Click on Arrows (  or  ) to go to other tag data records Main Menu

Second: Click on SELECT to review STATS – shows information on number of tags stored, etc. Main TagMate™QC Menu: STATS First: Click on Arrows (  or  ) for SETUP, DATA or STATS STATS Selected Main Menu

Click on SELECT to view next STATS screen STATS Selected Displays the number of tag records stored in TagMate™QC memory and how many of these records have alarms Stats Screen 1 Main Menu

Click on SELECT to view next STATS screen Displays Firmware Version number This screen is only used for reference in issues involving TurboTag™ Technical Support. Stats Screen 2 STATS Selected Main Menu

Click on SELECT to view next STATS screen Permits all tag records to be erased from TagMate™QC memory Stats Screen 3 STATS Selected Main Menu

Click on SELECT to review SETUP parameters – to control the way TagMate™QC displays data SETUP Selected Click on Arrows (  or  ) for SETUP, DATA or STATS Main TagMate™QC Menu: SETUP Main Menu

Click on SELECT to view next SETUP screen Displays time zone relative to GMT This can be reset using the Arrow (  or  ) buttons for higher or lower GMT Setup Screen 1 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays Daylight Savings ON/OFF status This can be reset using the Arrow (  or  ) buttons for ON/OFF Setup Screen 2 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays temperature units status °C or °F This can be reset using the Arrow (  or  ) buttons for switching units Setup Screen 3 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays ON/OFF status for automatic tag stopping This can be switched using the Arrow (  or  ) buttons for ON/OFF Setup Screen 4 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays averaging function that is active This can be switched using the Arrow (  or  ) buttons for simple mean or MKT Setup Screen 5 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays status of shelf life function This can be switched using the Arrow (  or  ) buttons for YES/NO Setup Screen 6 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays alarm level for the shelf life parameter This value can be set up and down using the Arrow (  or  ) buttons Setup Screen 7 SETUP Selected Main Menu

Click on SELECT to view next SETUP screen Displays ON/OFF status for sound signals This can be switched using the Arrow (  or  ) buttons for ON/OFF Setup Screen 8 SETUP Selected Main Menu

Press SEND button The tag to be printed must be displayed on the screen. Print a Chart How to Print a Chart Main Menu

Info Field Max & Min Alarms Time over Maximum Time under Minimum Average Temp (MKT) Start Time Full Graph Unique Session ID How to Print a Chart Main Menu

PC IR Port Press SEND button TagMate™QC Screen indicates connection Software confirms data capture All data is then erased in TagMate™QC Sending Data with TagMate™QC TagMate™QC must be in “Main Menu” mode to SEND tag data and software must be in “IR Receive” mode Main Menu

Press START button Starting Tag Starting with TagMate™QC TagMate™QC must have an internal dip switch set to START mode to act as a starter Main Menu

Press READ button Second long tone indicates alarm Reading Tag Reading with TagMate™QC TagMate™QC must be in “Main Menu” mode to READ a tag Main Menu

Additional Capabilities and Options A special fifth Carryover Mode can be used to concatenate monitoring sessions, with of current shelf life as initial shelf life. Shelf life calculation mode has three states: Never/Always/If Logging..Alarm Parameters Tmax Overshoot and Hrs Over and Hrs Under are displayed. Implementation of battery and line power options with auto detect and dynamic..switching. TagMate™QC Operates in 4 Modes settable by customer-accessible dip switches*: Read Only Read & Stop Start Only Configure & Start In Configure & Start Mode, the configuration used is stored on the TagMate™. It is updated by reading a setup tag made in Session Manager™ software. Main Menu * Or optionally by “scan cards” included with the product