1 Chang Shuan Eletronics Co., Ltd

2 CS1 SERIES FAMILY 0.8” LED will be available on Jun. 2007

3 CS1 series CS1-VA Voltage / Current Meters 0~600V / 0~10A for DC/AC/TRMS CS1-F Frequency Meters 0.01Hz~100KHz (Optional ~140KHz), 30~600Vp CS1-PR Linear Process Indicators 0~10V & 0(4)~20mA CS1-SG Strain Gauge Indicators 1.0/2.0/4.0 ~ 10.0/20.0/40.0 mV/V CS1-PM PotentioMeter Indicators 0~2.0K / 0~50.0K ohm ( 3 Wired) CS1-RS Resistance Indicators 0.1~200/~2000/~20.0K/200.0K ohm (2 wired)

4 CS1 series CS1-TP(C) Temperature Indicators Pt100 ohm / Thermocouple K,J,E,T,R,S,B. CS1-RL Linear Speed / Rotation Indicators 0.01~100KHz /~140KHz (Optional) NPN / PNP / Contact / Vp

Features of CS1 series Option for 1 relay output, Analogue output or RS 485 Communication 1 relay output Hi / Lo / Hi.HLd / Lo.HLd / do Hi / Lo / Hi.HLd / Lo.HLd / do with Start Delay / Hysteresis / Energized & De-energized Delay / DO / with Start Delay / Hysteresis / Energized & De-energized Delay / DO / Relay Energized Hold….. Relay Energized Hold….. Analogue output Analogue output Analogue High and Low settable as zoom-in function Analogue High and Low settable as zoom-in function Analogue output high limited function Analogue output high limited function RS 485 port RS 485 port Address number 1~255, Baud Rate from 2400~38400 bps Address number 1~255, Baud Rate from 2400~38400 bps Showing data in display screen from Modbus RTU mode 06 function Showing data in display screen from Modbus RTU mode 06 function

Display Present Value (PV) / Maximum or Minimum Hold / RS485 writing Present Value (PV) / Maximum or Minimum Hold / RS485 writing Low Cut, Average, Digital Filter, Scaling, Digital Fine adjustment….. Low Cut, Average, Digital Filter, Scaling, Digital Fine adjustment…..

1 relay output 1 relay output Hi / Lo / Hi.HLd / Lo.HLd / do Hi / Lo / Hi.HLd / Lo.HLd / do  Hi: High Limit Energized, when the PV >= Set-point  Lo: Low Limited Energized, when the PV <= Set-point  Hi.HLd (Lo.HLd): High (Low) Limit Energized continuously until manual reset by front key or External Control until manual reset by front key or External Control Input (ECI) Input (ECI)  do: Relay energized according to the RS485 command

8 Start Delay / Hystersis / Relay energized delay / Start Delay / Hystersis / Relay energized delay / Relay De-energized delay Relay De-energized delay Start Delay Start Delay Hysteresis: Settable range from 0~9999 Counts Hysteresis: Settable range from 0~9999 Counts Relay energized delay: Settable range from Relay energized delay: Settable range from 0.1(second)~9(minutes)59.9(seconds); 0.1(second)~9(minutes)59.9(seconds); Relay de-energized delay: Settable range from Relay de-energized delay: Settable range from 0.1(second)~9(minutes)59.9(seconds) 0.1(second)~9(minutes)59.9(seconds)

Analogue output Analogue output Accuracy: ≦  0.1% of F.S.; Accuracy: ≦  0.1% of F.S.; Response time: ≦ 200 msec. (10~90% of input) Response time: ≦ 200 msec. (10~90% of input) Isolation: AC 2.0 KV between input and output Isolation: AC 2.0 KV between input and output Functions: Functions:  Ao.Hi(output high): PV Hi vs. output range Hi  Ao.Lo(output range Low): PV Low vs. output range Lo  Ao.LMt(output High Limit): 0.00~110.00% of output High

RS 485 port RS 485 port Modbus RTU Mode Modbus RTU Mode  Address: 1~255.  Baud Rate: 1200 / 2400 / 4800 / 9600 / / selectable.  Parity: Even / Odd / None parity, 8 data bits, 1 stop bit / None parity, 8 data bits, 2 stop bit selectable. parity, 8 data bits, 2 stop bit selectable. Can read External Control Input (ECI) status Can read External Control Input (ECI) status Can send the data to display screen by Modbus command Can send the data to display screen by Modbus command Flexible Functions Flexible Functions Field Calibration for CS1-SG / CS1-PM / CS1-RS Field Calibration for CS1-SG / CS1-PM / CS1-RS

Specification CS1-VA  Measuring: Vdc, Vac, Adc, Aac / 0~600V or 0~10A  Accuracy: DC: ± 0.04%~0.1% F.S.± 1 count; AC: ± 0.1%~0.1% F.S.± 1 count AC: ± 0.1%~0.1% F.S.± 1 count  Display: ~29999, 0.56” high bright LED CS1-F CS1-F  Measuring: 0~100KHz(140KHz max.), Decimal Point auto set  Accuracy: ± 0.005% F.S. ± 1 count  Display: 0~99999, 0.56” high bright LED  Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal block block CS1-PR CS1-PR  Measuring: 0~(5)10Vdc & 0(4)~20mAdc All in one  Accuracy: ± 0.04%~0.1% F.S.± 1 count  Display: ~29999, 0.56” high bright LED

12 Specification CS1-SG  Measuring: 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V specify  Accuracy: ± 0.04%~0.1% F.S.± 1 count  Display: ~29999, 0.56” high bright LED CS1-PM CS1-PM  Measuring: 0.0~2.0KΩ/~100.0KΩ (3 wired)  Accuracy: ± 0.04% F.S. ± 1 count  Display: ~29999, 0.56” high bright LED CS1-RS CS1-RS  Measuring: 0.1~200Ω/~2000Ω/~20.0KΩ/~200.0KΩ (2 wired)  Accuracy: ± 0.04% F.S. ± 1 count  Display: ~29999, 0.56” high bright LED

13 Specification CS1-TP(C) CS1-TP(C)  Measuring: Pt100Ω (3 wired) / Thermocouple K,J,E,T,R,S,B..  Accuracy: Pt100Ω: ± 0.1% F.S. ± 1 count Thermocouple K,J,E,T: ± 0.2% F.S. ± 1 count Thermocouple K,J,E,T: ± 0.2% F.S. ± 1 count Thermocouple R,S,B: ± 0.3% F.S. ± 1 count Thermocouple R,S,B: ± 0.3% F.S. ± 1 count  Display: ~29999, 0.56” high bright LED CS1-RL CS1-RL  Measuring: 0~100KHz(140KHz max.), Decimal Point auto set  Accuracy: ± 0.005% F.S. ± 1 count  Display: 0~99999, 0.56” high bright LED  Input mode: NPN / PNP / Vp changeable by Dip Switch on rear terminal block block