Control Panel Overview

Purpose of the Control Panel  The Control Panel allows you to choose what you want your projector to display on the screen.

Control Panel  When you walk into your new classroom the control panel will look like this. The panel will be in sleep mode. Sleep mode will occur after 5 minutes of inactivity. This is an energy saving feature of the panel.

Quick overview DV D VCR TV Computer Volume up Volume down Mute Power Off Only N/A To activate the screen choose any of the buttons on the left hand side of the control panel. The PCHS screen will display if you choose the Power Off button on the lower right hand side of the panel. The Power Off button will turn off everything, DVD, VCR, etc…Except your computer.

Volume Controls  Volume controls are the top right buttons.  Volume Up  Volume Down  Mute  Volume controls are the top right buttons.  Volume Up  Volume Down  Mute

DVD player  To access the DVD player choose the upper left hand button.  Once you switch to DVD mode, the panel will look similar to any DVD navigation panel. Controls can be selected by touch.  To access the DVD player choose the upper left hand button.  Once you switch to DVD mode, the panel will look similar to any DVD navigation panel. Controls can be selected by touch.

VCR  To access the VCR choose the second button down on the left hand side.  Once you switch to VCR mode, the panel will look similar to any VCR navigation panel. Controls can be selected by touch.  To access the VCR choose the second button down on the left hand side.  Once you switch to VCR mode, the panel will look similar to any VCR navigation panel. Controls can be selected by touch.

Television  To access the TV choose the Third button down on the left hand side.  To play the Miner Morning show simply touch the MMS button on the display panel.  To access the TV choose the Third button down on the left hand side.  To play the Miner Morning show simply touch the MMS button on the display panel.

Projecting computer screen  To project what is on your computer screen your will need to choose the fourth button down on the left hand side of the control panel.  By default the Desktop Computer Input is selected.  To project what is on your computer screen your will need to choose the fourth button down on the left hand side of the control panel.  By default the Desktop Computer Input is selected.

Hooking up another computer If you want to hook up another computer you will need to choose the Room Computer Input. You will then need to plug the computer into the wall port next to the white board. If you want to hook up another computer you will need to choose the Room Computer Input. You will then need to plug the computer into the wall port next to the white board.

Hooking up external devices If you want to hook up an external devices such as an Elmo or a Video Ipod you will need to select the Room Video Input. These items will also need to be plugged into the wall port next to the white board. If you want to hook up an external devices such as an Elmo or a Video Ipod you will need to select the Room Video Input. These items will also need to be plugged into the wall port next to the white board.