doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 1 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: IEEE P TG2 / EMC Society Standards Development Committee Joint Meeting Date Submitted: 13 March 2001 Source: Stephen Berger Company TEM Consulting, LP Address 140 River Rd., Georgetown, Tx Voice: (512) , FAX: (512) , Re: Presentation prepared for joint meeting, 14 March, 2001 Abstract:This presentation presents the scope and charter of the IEEE EMC Society SDCom and discusses areas of mutual interest with IEEE TG2 Purpose:Initiation of liaison with IEEE EMC SDCom for areas of mutual interest Notice:This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 2 IEEE TG 2 & IEEE EMC Society Standards Development Committee (IEEE EMCS SDCom) Joint Meeting

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 3 IEEE EMCS SDCom Organization

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 4

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 5 IEEE EMCS SDCom Scope & Purpose The IEEE EMC Society Standards Development Committee is responsible to guide the development of IEEE EMC Standards. The IEEE EMC Society is the primary international developer of fundamental test and measurement standards for EMC.

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 6 IEEE EMCS SDCom Standards STD / DATETITLE STD IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on the Users Premises STD IEEE Recommended Practice for the Minimization of Interference from Radio Frequency Heating Equipment STD IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious Radiation from FM and Television Broadcast Receivers STD IEEE Standard Procedure for Measuring Conducted Emissions in the Range of 300kHz to 25MHz from Television and FM Broadcast receivers to Power Lines STD IEEE Standard Method of Measuring the Effectiveness of Electromagnetic Shielding Enclosures STD IEEE Standard for the Measurement of Impulse Bandwidth STD IEEE Recommended Practice for Communication Transmitters STD IEEE Practice for an Electromagnetic Site Survey (10kHz to 10 GHz) STD IEEE Measurement Procedure for Field Disturbance Sensor (RF Intrusion Alarm)

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 7 IEEE EMCS SDCom Standards STD / DATETITLE STD 1128IEEE Recommended Practice for RF Absorber Evaluation in the Range of 30MHz to 5GHz STD (Reaff 1999) IEEE Standard Procedures for the Measurement of Electric and magnetic Fields from Video Display Terminals (VDT’S) from 5Hz to 400kHz STD 1302 Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18GHz STD IEEE Standard Method for the Calibration of Electromagnetic Field Sensors and Field Probes, Excluding Antennas, from 9 kHz to 40GHz PAR 1530Recommended Practice for the Design and Construction of Calibration Artifacts for Cable and Connector Shielding Test Fixtures for Frequencies from 1 Hz to 10 GHz

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 8 Areas of Common Interest EM Interference & Immunity Accurate Measurement of EM Emissions Issues of EM Environment Coexistence of , with other equipment types

doc.: IEEE /168r0 Submission March 2001 Stephen Berger, TEM Consulting Slide 9 Key Parameters of Mutual Interest Maximum transmission amplitude Maximum & average transmission power Time domain transmission envelop Span and characteristics of developing EM environment from the 2.4 GHz band Appropriateness of immunity tests, ad hoc and other