DIY T-SHIRT UPDATES Ltec 3220 Maymester 2013

Muscle Tank DIY T-Shirt Updates BeanieRacer Back Tank MAIN MENU

Simple look for working out or wear over sport tops to the gym or beach! Muscle Tank

Need: Scissors Lay Shirt Flat Mark With Pen Where To Cut Sleeves NEXT

Optional: Fold shirt in half to ensure even cutting Trim neck for looser look NEXT

Final Touches Pull the newly trimmed edges to make ends roll onto themselves NEXT

Using old knits to make new options for your wardrobe! Beanie

Needed: Scissors Sharpie Needle Thread Measuring Tape NEXT

Measure about 11 inches of fabric from the bottom NEXT

Snip the side of one hem for one continuous panel Measure around the dome of your head NEXT

Rounding the Edge For this you will need to fold the panel in either thirds or fourths. Keep the panel inside out so when sewing, the edges will be clean! On the rough edge, create a dome shape by cutting a semi-circle NEXT

Sewing up the ends Using the needle and thread, sew the open end of the panel Then fold the dome shaped ends together and sew across NEXT

Final For this, there are four folds, creating a T- Shape at the dome NEXT

Added detail to a traditional tank Racer Back Tank

Similar to the first DIY Tank cut the sleeves and crew neck Using an example, the back will be cut more slimming to allow a fitted look. NEXT

Pull ends to roll edges Trim bottom hem for strings for next step NEXT

Tie at top of the sleeves at the shoulders with back facing up Wrap remaining rope hem around sleeves NEXT

At bottom of roped hem, double knot the ends and tuck under itself. NEXT

Final Return to Main Menu