FCA3000/3100 Series Timer/Counter/Analyzers Feature-rich Tools for Precision Measurements Features Featuring:  300 MHz, 3 GHz, 20 GHz models  Up to 3 input channels  12 digit/sec frequency resolution  50 ps (FCA3100) or 100 ps (FCA3000) single-shot time resolution  o phase resolution  250 k samples/sec data transfer rate to internal memory; up to 15 k samples/sec block data transfer rate over bus  Continuous data streaming over USB/GPIB bus (FCA3100)  Up to 13 automated frequency, time, phase and voltage measurements  Totalize measurement (FCA3100)  Trend plot, statistics, histogram analysis modes  USB and GPIB device ports on rear panel  National Instruments LabVIEW SignalExpress™ TE Limited Edition included  3-year warranty Benefits Analyze your device with graphical display modes The FCA3000 and FCA3100 Series offer industry-leading time and frequency resolution for accurate measurements. 12 digit/s frequency resolutionSee small changes in frequency with industry-leading frequency resolution. Down to 50 ps time resolutionAccurately capture signal details with industry-leading single-shot time resolution. Multi-parameter displayRead critical auxiliary measurement values displayed with your main frequency, time, or phase measurement to quickly asses your device’s performance. Trend Plot modePlot measurement trends and graphically identify the extent of drift and intermittent events. Histogram modeDiscover stability or noise problems by viewing results as a histogram. Statistics modeView multiple statistical values such as average, min, max, standard and Allan deviation to see how your signal is changing. Optional TimeView™ softwareTransform your counter/timer into a modulation domain analyzer and see frequency changes over time to truly characterize your device’s performance. USB and GPIB portsEasily connect to a personal computer for further analysis or into an ATE system with the back-panel USB and GPIB ports; an emulation mode for legacy counter/timers further simplifies integrating into an existing ATE system. PC ConnectivityControl your counter/timer, log data, and simply transfer and document your results with the included copy of NI LabVIEW SignalExpress software.

Key specifications and ordering information 9/10 GB/WWW 3CW FCA3000/3100 Series Timer/Counter/Analyzers Fact Sheet © 2010 Tektronix Models Max. FrequencyChannelsTime Resolution Frequency Resolution FCA MHz2100 ps12 digit/s FCA30033 GHz 2 – 300 MHz 1 – 3 GHz 100 ps12 digit/s FCA GHz 2 – 300 MHz 1 – 20GHz 100 ps12 digit/s FCA MHz250 ps12 digit/s FCA31033 GHz 2 – 300 MHz 1 – 3 GHz 50 ps12 digit/s FCA GHz 2 – 300 MHz 1 – 20GHz 50 ps12 digit/s Recommended Accessories, Test Leads and Probes TVA3000 TimeView™ Modulation Domain Analysis Software xx USB Host to Device Cable, 3 Feet xxGPIB Cable, Double Shielded xx BNC Male to BNC Male, 9 Feet. AC4000 Soft Carrying Case. HCTEK4321 Hard Carrying Case. Opt. C3/C5 3, 5 Year Calibration Service Plan. Opt. D1 Calibration Data Report. Opt. R5 5 Year Repair Service Plan. Key ApplicationsBenefits  Design and debug of embedded systems  Precisely measure frequency, time and phase parameters with industry-leading resolution, all with one instrument to save bench space.  Reveal signal quality issues like drift, transients and stability problems by viewing data as a real-time trend plot or histogram.  Data log readings to internal memory.  Automated Test  Substitute for legacy counter/timers into existing test systems using emulation modes.  Control remotely using most available application and development languages with SCPI compatibility and drivers.  Save 250,000 measurements/sec to internal memory then block transfer 15,000 measurements/sec (FCA31000) or 5,000. measurements/sec, saving precious test time. Standard Accessories  Power Cord  CD Rom with User Manual  Programmer’s Guide  Technical Specifications  Trial version of TimeView™ software  NI LabVIEW SignalExpress™ Tektronix Edition, Limited Edition Software  Certificate of Calibration  Three Year Warranty Instrument Options MS – Medium stability OCXO timebase, 2 X10 -7 HS – High stability OCXO timebase, 5 X10 -8 RP – Rear panel connectors