PCI Big Beam Contest New Oriental Junfeng Qian Shiyu Wang Qi Wang.

Slides:



Advertisements
Similar presentations
PCI Big Beam Contest Team 1 (XDF) Junfeng Qian Shiyu Wang Qi Wang.
Advertisements

1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore Mob:
Outline CH1.Introduction CH2.Preliminary Design CH3.3D Model.
Reinforced Concrete Design-8
Behaviors of Post-Tensioning and Anchorage Systems REU student: Geoff Madrazo PI’s: Dr. Richard Sause and Dr. James Ricles Graduate Mentor: David Roke.
ANALYSIS OF TWO-WAY SLABS WITH BEAMS
Overview Waffle Slab.
PCI 6 th Edition Handbook History. Presentation Outline PCI history Notable modifications to the 6 th Edition General chapter by chapter overview.
Reinforced Concrete Flexural Members
Shear and Diagonal Tension
1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore Mob:
SHEAR IN BEAMS. SHEAR IN BEAMS Example (4.1): A rectangular beam has the dimensions shown in Figure 4.12.a and is loaded with a 40 ton concentrated.
Abstract This project is a structural analysis and design of a residential building located in JENIEN City, The building is consisted of 7 floors. The.
Chp-6:Lecture Goals Serviceability Deflection calculation
ONE-WAY SLAB. ONE-WAY SLAB Introduction A slab is structural element whose thickness is small compared to its own length and width. Slabs are usually.
Chp.12 Cont. – Examples to design Footings
Dr. Jose Pires Structural, Geotechnical and Seismic Engineering Branch
Department of Civil Engineering NED University Engineering & Technology Building Prof Sarosh Lodi.
A Medical Office Building For The Primary Health Network Daniel Goff I Structural Option Dr. Thomas Boothby l Faculty Advisor Sharon, Pennsylvania Source:
Penn State Hershey Medical Center Children’s Hospital Hershey, Pennsylvania Matthew Vandersall Structural Option AE Senior Thesis Dr. Richard Behr.
Slab Design.
EXAMPLE 9.2 – Part VII PCI Bridge Design Manual
INTERNATIONAL LABOR STANDARDS
Structural Drawing Chapter Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson Education, Upper.
Plain & Reinforced Concrete-1 CE-313
George Read Hall The University of Delaware
Hershey Research Park Building One Jonathan Krepps Structural Option Senior Thesis 2013 Faculty Advisor: Dr. Hanagan.
Lecture 2 - Fundamentals. Lecture Goals Design Process Limit states Design Philosophy Loading.
By Reza Esfandiari, SULI Program Mentor: Carsten Hast August 14, 2009.
Southeast View of IRMC West View of IRMC. Presentation Outline Introduction Existing Structure Thesis Goals Structural Depth Lighting Breadth Conclusion.
Structural Design of Movenpick Hotel
◦ Ar-Rafedain building is 8 stories reinforced concrete building,located in Nablus city and used as commercial and residential building. ◦ The basement.
CTC 422 Design of Steel Structures
An-Najah National University Faculty of Engineering Civil Engineering Department.
Highly Flexible Design for Gantry Robot Systems Team: F08-77-FLXGANT1 Client: Logic One Robots Contact: Bill Egert, Engr VP.
URS – ARENA DISTRICT OFFICE BUILDING DAVID LEE STRUCTURAL OPTION.
Project title : Typical design of community college Supervisors: 1-Prof.Dr.abdulmohsion W. Dhowain 2-Dr. Mohammad Jamal AL Shannag 3-Dr. Ibrahim Hamouda.
CE A433 – RC Design T. Bart Quimby, P.E., Ph.D. Revised Spring 2009
Fordham Place Bronx, NY Aric Heffelfinger Structural Option Spring 2006.
Justin Purcell Structural Option Advisor: Dr. Hanagan.
By Dr. Attaullah Shah Swedish College of Engineering and Technology Wah Cantt. Reinforced Concrete Design-3 Flexural Design of Beams.
1 THE PCI “BIG BEAM CONTEST” – AN EFFECTIVE TEACHING TOOL RICHARD MILLER, FPCI PROFESSOR OF CIVIL ENGINEERING UNIVERSITY OF CINCINNATI CHAIR, PCI RESEARCH.
DESIGN OF SINGLY REINFORCED BEAM
Chagrin Highlands Building One Beechwood, Ohio Branden J. Ellenberger - Structural Option Senior Thesis 2004.
Practical Design of PT Buildings
Arlington Gateway Hotel 801 North Glebe Road Arlington, Virginia Michael Gray Penn State University AE Senior Thesis Presentation 2005.
Analysis and Design of Reinforced Concrete Beams
By Dr. Attaullah Shah Swedish College of Engineering and Technology Wah Cantt. Reinforced Concrete Design-6 Shear Design of Beams.
. Client: City of Pittsburgh, Brighton Heights Community Objectives : Develop a pedestrian/bicycle bridge reconnecting Brighton Heights to Riverview park.
Analysis and Design of Beams for Bending
AUTOMATED ROD SINGULATION SYSTEM Student: James Welch Concentration: Mechanical Class: ET-494 Spring 2015 Instructor: Dr. Cris Koutsougeras Advisors: Dr.
Dr Badorul Hisham Abu Bakar
R. Bryan Peiffer– Structural Option AE Senior Thesis 2011 Three PNC Plaza, Pittsburgh Pa.
DURABILITY OF CONCRETE STRUCTURES RURAL POLYTECHNIC TARIHAL
جامعة النجاح الوطنية كلية الهندسة قسم هندسة البناء
Dr. E. R. Latifee Md. Aminul Islam DebasisH Sen Rashedul Kabir
Advisor: Professor M. Kevin Parfitt
Lecture 39 - Design of Two-Way Floor Slab System
786 Design of Two Way Floor System for Slab with Beams
Northern Arizona University Concrete Canoe 2018
A Comparison of the Fire Performance of Prestressed Concrete Double T-beams using Design Provisions and SAFIR By: Nickolas Hatinger.
Reinforced Concrete Design-3 Flexural Design of Beams
Precast/Prestressed Concrete Institute: Big Beam Competition
Plain & Reinforced Concrete-1 CE3601
An Najah National University Submitted to : Dr.Munther Diab .
Reinforced Concrete Design-3 Flexural Design of Beams
" multifunctional building design"
Performance Reviews May, 2019 Dr. René E. Quiroz, Workday Services.
Research Administration Forum
How do architects determine the number of beams needed?
Presentation transcript:

PCI Big Beam Contest New Oriental Junfeng Qian Shiyu Wang Qi Wang

Presentation Outline Background Contest Rules Project Constrains Scope of Service Timeline

Background Sponsored by PCI and Sika Corporation PCI- Precast/Prestressed Concrete Institute Contest Period: 8/15/ /15/2013.

Background Cont. Judging Criteria – Design accuracy – Lowest cost – Lowest weight – Largest measured deflection at maximum total applied load – Report quality – Video

Contest Rules The beam must no longer than 20 feet and must be tested as a simply supported span of 18 feet The beam shall be designed for dead load plus two applied service live loads of 10 kips

Contest Rules Cont. All unit cost of available materials are provided by PCI All entries must meet the provisions of ACI or the 7th Edition of the PCI Design Handbook

Scope of Service Project Management Background and Literature Search Preliminary Analysis & Design Final Analysis & Design Testing Instrumentation Setting Up Service During Fabrication Beam Test Design Report

Scope Of Service Task 1-Project Management Weekly Team Meeting – Update Design – Comments Technical Coordination Meeting – Workshop – Meet with Project Manager of Sponsor Company

Scope of Service Cont. Task 2-Literature Search ACI PCI Design Handbook, 7th Edition

Scope of Service Cont. Task 3-Preliminary Analysis & Design Material Selection – Concrete Mix Lightweight Self Consolidating Concrete Normal Self Consolidating Concrete – Reinforcement Bar ASTM Standard #4 or #5 Design Spreadsheet Design Matrix – Six to Eight Options

Scope of Service Cont. Task 4-Final Analysis & Design Final Option Design Verification – Response 2000 Auto CAD Drawing – Cross Section View – Side View

Scope of Service Cont. Task 5-Testing Instrumentation Setting Up Task 6-Service during Fabrication – Troubleshooting Task 7-Beam Test – Test Results – Video Task 8-Design Report

Timeline

Reference Technical Advisor: Dr. Tuchscherer Project Manager: David L. Chapin Sponsor: Tpac Company Acknowledge ACI Code The 7th Edition of the PCI Design Handbook

Questions

Thank you!