Trusted Video Management NUUO Bridge Remote Setting
Trusted Video Management Overview NUUO Bridge Remote introduction Remote Access : Domain Remote Access : Workgroup
Trusted Video Management NUUO Bridge Remote Introduction Step : 1.Start up the Bridge for v Press Settings and select remote 3.There are two types for remote connection: Domain WorkGroup
Trusted Video Management Remote Access : Domain When select Domain for remote access to Lenel Onguard, you only need to enter the IP only. Please follow the instructions : 1) Start > Right Click Computer >Properties 2) Click Advanced System Settings on the left 3) Go to the Computer Name tab 4) Click Change next to “Rename this computer etc “ 5) Check the box for Domain, not Workgroup. Type your domain name then press OK. Note :You might have to enter the details of an Administrator account and you will have to restart the computer.
Trusted Video Management Domain : System Setting
Trusted Video Management Domain :Domain name Change
Trusted Video Management Domain: Log in with AD Username/Password
Trusted Video Management Remote Access : Workgroup When select Workgroup for remote access to Lenel Onguard, you need to enter the IP & username / Password Please follow the instructions : 1) Start > Right Click Computer >Properties 2) Click Advanced System Settings on the left 3) Go to the Computer Name tab 4) Click Change next to “Rename this computer etc “ 5) Check the box for Workgroup. Type “Workgroup “ then press OK.
Trusted Video Management Workgroup : System Setting
Trusted Video Management Workgroup : Change name
Trusted Video Management FAQ
Trusted Video Management Remote Onguard Configuration requirement 1) Allow WMI pass Windows Firewall Close Windows Firewall directly Refer to the link below for section 「 In Windows Firewall,... 」: 2) Query Device successfully , but can not connect to OnGuard Refer to the link below for section : 「 To grant DCOM remote access permissions 」
Trusted Video Management Thank you!