Illumination and the Wave Nature of Light

Illumination Light Light and sound are two methods by which you can receive information Of the two, light seems to provide the greater variety of information The human eye can detect tiny changes in the size, position, brightness, and color of an object. Our eyes usually can distinguish shadows from solid objects and sometimes distinguish reflections of objects from the objects themselves

Illumination Ray Model of Light Isaac Newton believed that light is a stream of fast-moving, unimaginably tiny particles, which he called corpuscles However, his model could not explain all of the properties of light Experiments showed that light also behaves like a wave In the ray model of light, light is represented as a ray that travels in a straight path, the direction of which can be changed only by placing an obstruction in the path

Illumination Ray Model of Light The ray model of light was introduced as a way to study how light interacts with matter, regardless of whether light is a particle or a wave This study of light is called ray optics or geometric optics

Illumination Sources of Light Rays of light come from sources of light Our major source of light is the Sun Other natural sources of light include flames, sparks, and even fireflies Incandescent bulbs, fluorescent lamps, television screens, lasers, and tiny, light-emitting diodes (LEDs) are each a result of humans using electricity to produce light

Illumination Sources of Light What is the difference between sunlight and moonlight Sunlight, of course, is much, much brighter. There is also an important fundamental difference between the two The Sun is a luminous source, an object that emits light In contrast, the Moon is an illuminated source, an object that becomes visible as a result of the light reflecting off it

Illumination Sources of Light An incandescent lamp, such as a common lightbulb, is luminous because electrical energy heats a thin tungsten wire in the bulb and causes it to glow An incandescent source emits light as a result of its high temperature A bicycle reflector, on the other hand, works as an illuminated source It is designed to become highly visible when it is illuminated by luminous automobile headlights

Illumination Sources of Light Illuminated sources are visible to you because light is reflecting off or transmitting (passing) through the object to your eyes Media, such as brick, that do not transmit light, but reflect some light, are opaque media Media that transmit light, such as air and glass, are transparent media Media that transmit light, but do not permit objects to be seen clearly through them, are translucent media Lamp shades and frosted light bulbs are examples of objects that are made of translucent media. Transparent or translucent media not only transmit light, but they can also reflect a fraction of the light. For example, you can often see your reflection in a glass window

Illumination Quantity of Light The rate at which light energy is emitted from a luminous source is called the luminous flux, P The unit of luminous flux is the lumen (lm) A typical 100-W incandescent lightbulb emits approximately 1750 lm You can think of the luminous flux as a measure of the rate at which light rays come out of a luminous source

Illumination Quantity of Light Imagine placing a lightbulb at the center of a 1-m-radius sphere The lightbulb emits light in almost all directions

Illumination Quantity of Light The 1750 lm of luminous flux characterizes all of the light that strikes the inside surface of the sphere in a given unit of time If the sphere was 2 m in radius, the luminous flux of the light bulb would be the same, because the total number of light rays does not increase

Illumination Quantity of Light Once you know the quantity of light being emitted by a luminous source, you can determine the amount of illumination that the luminous source provides to an object The illumination of a surface, or the rate at which light strikes the surface, is called the illuminance, E Illuminance is measured in lux, lx, which is equivalent to lumens per square meter, lm/m2

Illumination Quantity of Light What is the illuminance of the sphere’s inside surface? The equation for the surface area of a sphere is 4πr2, so the surface area of this sphere is 4π(1.00 m)2 = 4π m2

Illumination Quantity of Light The luminous flux striking each square meter of the sphere is 1750 lm/(4π m2) = 139 lx At a distance of 1.00 m from the bulb, 139 lm strikes each square meter. The illuminance of the inside of the sphere is 139 lx

Illumination An Inverse-square Relationship What would happen if the sphere surrounding the lamp was larger? If the sphere had a radius of 2.00 m, the luminous flux would still total 1750 lm

Illumination An Inverse-square Relationship But the area of the sphere would be 4π(2.00 m)2 = 16.0π m2, four times larger than the 1.00-m sphere, as shown in the figure The illuminance of the inside of the 2.00-m sphere is 1750 lm/(16.0π m2) = 34.8 lx, so 34.8 lm strikes each square meter

Illumination An Inverse-square Relationship The illuminance on the inside surface of the 2.00-m sphere is one- fourth the illuminance on the inside of the 1.00-m sphere In the same way, the inside of a sphere with a 3.00-m radius has an illuminance only (1/3)2, or 1/9, as large as the 1.00-m sphere the illuminance caused by a point source is proportional to 1/r2, an inverse-square relationship As the light rays spread out in straight lines in all directions from a point source, the number of light rays available to illuminate a unit of area decreases as the square of the distance from the point source

Illumination Luminous Intensity Some luminous sources are specified in candelas, cd A candela is not a measure of luminous flux, but of luminous intensity The luminous intensity of a point source is the luminous flux that falls on 1 m2 of the inside of a 1-m-radius sphere Thus, luminous intensity is luminous flux divided by 4π. A bulb with 1750 lm of flux has an intensity of 1750 lm/4π = 139 cd

Illumination Luminous Intensity For the light bulb to provide the same illuminance on the light bulb side of the screen as the candle does on the candle side of the screen, the light bulb would have to be four times brighter than the candle, and, therefore, the luminous intensity of the light bulb would have to be four times the luminous intensity of the candle

Illumination Point Source Illuminance Illuminate a Surface The illuminance caused by a point light source is represented by the following equation Point Source Illuminance

Illumination Illuminate a Surface If an object is illuminated by a point source of light, then the illuminance at the object is equal to the luminous flux of the light source, divided by the surface area of the sphere, whose radius is equal to the distance the object is from the light source Remember that the luminous flux of the light source is spreading out spherically in all directions, so only a fraction of the luminous flux is available to illuminate the desk

Illumination Illuminate a Surface Use of the point source illuminance equation is valid only if the light from the luminous source strikes perpendicular to the surface it is illuminating It is also only valid for luminous sources that are small enough or far enough away to be considered point sources Thus, the equation does not give accurate values of illuminance for long, fluorescent lamps or incandescent lightbulbs that are close to the surfaces that they illuminate

Illumination Illuminate a Surface Engineers who design lighting systems must understand how the light will be used If an even illumination is needed to prevent dark areas, the common practice is to evenly space normal lights over the area to be illuminated Because such light sources do not produce true even light, engineers also design special light sources that control the spread of the light, such that it will produce an even illumination over a large surface area Much work has been done in this field with automobile headlights

Illumination Illuminate a Surface An outdoor lamp has a luminous flux of 2500 lm. What is the illuminance on the ground if the lamp is mounted at a height of 2.8 m? What is the illuminance on a house that is 10.7 m from the lamp? What is the luminous intensity of the lamp? A home movie projector has an internal lamp with a luminous flux of 1500 lm. How far from the screen should the projector be positioned to obtain a screen illuminance of 3.32 lx? What would be the luminous flux of the projector if it produced the same screen illuminance at 4.89 m from the screen?

Illumination The Speed of Light For light to travel from a source to an object to be illuminated, it must travel across some distance According to classical mechanics, if you can measure the distance and the time it takes to travel that distance, you can calculate a speed Galileo was the first to hypothesize that light has a finite speed, and to suggest a method of measuring its speed using distance and time His method, however, was not precise enough, and he was forced to conclude that the speed of light is too fast to be measured over a distance of a few kilometers

Illumination The Speed of Light Danish astronomer Ole Roemer was the first to determine that light does travel with a measurable speed He recorded the times when Io emerged from Jupiter’s shadow, as shown in the figure

Illumination The Speed of Light Roemer made his measurements as part of a project to improve maps by calculating the longitude of locations on Earth After making many measurements, Roemer was able to predict when the next eclipse of Io would occur He compared his predictions with the actual measured times and found that Io’s orbital period increased on average by about 13 s per orbit when Earth was moving away from Jupiter and decreased on average by about 13 s per orbit when Earth was approaching Jupiter Roemer believed that Jupiter’s moons were just as regular in their orbits as Earth’s moon; thus, he wondered what might cause this discrepancy in the measurement of Io’s orbital period

Illumination The Speed of Light Roemer concluded that as Earth moved away from Jupiter, the light from each new appearance of Io took longer to travel to Earth because of the increasing distance to Earth Likewise, as Earth approached Jupiter, Io’s orbital period seemed to decrease

Illumination The Speed of Light Roemer noted that during the 182.5 days that it took Earth to travel from position 1 to position 3, as shown in the animation, there were (185.2 days)(1 Io eclipse/1.8 days) = 103 Io eclipses

Illumination Measurements of the Speed of Light Earth’s orbit, he calculated that it takes (103 eclipses)(13 s/eclipse) = 1.3×103 s, or 22 min Using the presently known value of the diameter of Earth’s orbit (2.9×1011 m), Roemer’s value of 22 min gives a value for the speed of light of 2.9×1011 m/((22 min)(60 s/min)) = 2.2×108 m/s Today, the speed of light is known to be closer to 3.0×108 m/s Thus, light takes 16.5 min, not 22 min, to cross Earth’s orbit

Illumination Measurements of the Speed of Light Although many measurements of the speed of light have been made, the most notable were performed by American physicist Albert A. Michelson. Between 1880 and the 1920s, he developed Earth-based techniques to measure the speed of light In 1926, Michelson measured the time required for light to make a round-trip between two California mountains 35 km apart. Michelson used a set of rotating mirrors to measure such small time intervals. Michelson’s best result was (2.997996 ± 0.00004)×108 m/s For this work, he became the first American to receive a Nobel Prize in science

Illumination Measurements of the Speed of Light The speed of light in a vacuum is a very important and universal value; thus it has its own special symbol, c Based on the wave nature of light, the International Committee on Weights and Measurements has measured and defined the speed of light in a vacuum to be c = 299,792,458 m/s For many calculations, the value c = 3.00×108 m/s is precise enough At this speed, light travels 9.46×1012 km in a year. This amount of distance is called a light-year

The Wave Nature of Light Diffraction and the Wave Model of Light

The Wave Nature of Light Color In 1666, Isaac Newton performed experiments on the colors produced when a narrow beam of sunlight passed through a glass prism, as shown in the figure Newton called the ordered arrangement of colors a spectrum

The Wave Nature of Light Color Using his corpuscle model of light, he believed that particles of light were interacting with some unevenness in the glass to produce the spectrum

The Wave Nature of Light Color If the spectrum was caused by irregularities in the glass, he reasoned that the second prism would increase the spread in colors Instead, the second prism reversed the spreading of colors and recombined them to form white light After more experiments, Newton concluded that white light is composed of colors, and that a property of the glass other than unevenness caused the light to separate into colors

The Wave Nature of Light Color Light has wave properties, and each color of light is associated with a wavelength Light falls within the range of wavelengths from about 400 nm (4.00×10–7 m) to 700 nm (7.00×10–7 m), as shown in the figure

The Wave Nature of Light Color As white light crosses the boundary from air into glass and back into air in the figure, its wave nature causes each different color of light to be bent, or refracted, at a different angle This unequal bending of the different colors causes the white light to be spread into a spectrum. This reveals that different wavelengths of light interact in different but predictable ways with matter

The Wave Nature of Light Color by Addition of Light White light can be formed from colored light in a variety of ways For example, when the correct intensities of red, green, and blue light are projected onto a white screen, as in the figure, the region where these three colors overlap on the screen will appear to be white

The Wave Nature of Light Color by Addition of Light Thus, red, green, and blue light form white light when they are combined. This is called the additive color process, which is used in color-television tubes A color-television tube contains tiny, dot-like sources of red, green, and blue light. When all three colors of light have the correct intensities, the screen appears to be white

The Wave Nature of Light Color by Addition of Light For this reason, red, green, and blue are each called a primary color The colors yellow, cyan, and magenta are each called a secondary color, because each is a combination of two primary colors Complementary colors are two colors of light that can be combined to make white light

The Wave Nature of Light Color by Subtraction of Light Apart from reflecting and transmitting light, objects can also absorb light Not only does the color of an object depend on the wavelengths present in the light that illuminates the object, but an object’s color also depends on what wavelengths are absorbed by the object and what wavelengths are reflected The natural existence or artificial placement of dyes in the material of an object, or pigments on its surface, give the object color

The Wave Nature of Light Color by Subtraction of Light A dye is a molecule that absorbs certain wavelengths of light and transmits or reflects others When light is absorbed, its energy is taken into the object that it strikes and is turned into other forms of energy A red shirt is red because the dyes in it reflect red light to our eyes

The Wave Nature of Light Color by Subtraction of Light When white light falls on the red object shown in the figure below, the dye molecules in the object absorb the blue and green light and reflect the red light When only blue light falls on the red object, very little light is reflected and the object appears to be almost black

The Wave Nature of Light Color by Subtraction of Light A pigment that absorbs only one primary color and reflects two from white light is called a primary pigment A pigment that absorbs two primary colors and reflects one color is called a secondary pigment Note that the primary pigment colors are the secondary colors. In the same way, the secondary pigment colors are the primary colors

The Wave Nature of Light Results in Color The grass looks green because of the chlorophyll in it Violet and blue light are scattered (repeatedly reflected) much more by molecules in the air than are other wavelengths of light, thus making the sky bluish Green and red light are not scattered much by the air, which is why the Sun looks yellow or orange

The Wave Nature of Light Polarization of Light Have you ever looked at light reflected off a road through polarizing sunglasses? As you rotate the glasses, the road first appears to be dark, then light, and then dark again Light from a lamp, however, changes very little as the glasses are rotated. Why is there a difference?

The Wave Nature of Light Polarization by Filtering One reason for this is that the light coming from the road is reflected The other reason is that the reflected light has become polarized Polarization can be understood by considering a rope model of light waves, as shown in the figure

The Wave Nature of Light Polarization by Filtering The transverse mechanical waves in the rope represent transverse light waves. The slots represent what is referred to as the polarizing axis of the polarizing medium When the rope waves are parallel to the slots, they pass through When they are perpendicular to the slots, the waves are blocked

The Wave Nature of Light Polarization by Filtering Ordinary light actually contains waves vibrating in every direction perpendicular to its direction of travel If a polarizing medium is placed in a beam of ordinary light, only the components of the waves in the same direction as the polarizing axis can pass through On average, half of the total light amplitude passes through, thereby reducing the intensity of the light by half The polarizing medium produces light that is polarized, meaning that it has a single plane of oscillation. Such a medium is said to be a polarizer of light and is called a polarizing filter

The Wave Nature of Light Polarization Analysis Suppose that you produce polarized light with a polarizing filter. What would happen if you place a second polarizing filter in the path of the polarized light? If the polarizing axis of the second filter is parallel to that of the first, the light will pass through If the polarizing axis of the second filter is perpendicular to that of the first, no light will pass through

The Wave Nature of Light Polarization Analysis The law that explains the reduction of light intensity as it passes through a second polarizing filter is called Malus’s law If the light intensity after the first polarizing filter is I1, then a second polarizing filter, with its polarizing axis at an angle, θ, relative to the polarizing axis of the first, will result in a light intensity, I2, that is equal to or less than I1 Malus’s Law

The Wave Nature of Light Polarization Analysis Using Malus’s law, you can compare the light intensity coming out of the second polarizing filter to the light intensity coming out of the first polarizing filter In this way, you can determine the orientation of the polarizing axis of the first filter relative to the second filter A polarizing filter that uses Malus’s law to accomplish this is called an analyzer Analyzers can be used to determine the polarization of light coming from any source

The Wave Nature of Light The Speed of a Light Wave The wavelength, λ, of a wave is a function of its speed in the medium in which it is traveling and its constant frequency, f For light of a given frequency traveling through a vacuum, wavelength is a function of the speed of light, c, which can be written as λ = c/f The development of the laser in the 1960s provided new methods of measuring the speed of light The frequency of light can be counted with extreme precision using lasers and the time standard provided by atomic clocks Measurements of wavelengths of light, however, are much less precise

The Wave Nature of Light The Speed of a Light Wave Different colors of light have different frequencies and wavelengths, but in a vacuum, they all travel at c Because all wavelengths of light travel at the same speed in a vacuum, when you know the frequency of a light wave in a vacuum, you can calculate its wavelength, and vice versa Thus, using precise measurements of light frequency and light speed, you can calculate a precise value of light wavelength

The Wave Nature of Light Relative Motion and Light

The Wave Nature of Light The Doppler Effect To study the Doppler effect for light, the problem can be simplified by considering axial relative speeds that are much less than the speed of light This simplification is used in the equation for the observed light frequency, fobs, which is the frequency of light as seen by an observer This equation can be used only for situations in which the axial relative speed is much less than the speed of light (v << c)

The Wave Nature of Light The Doppler Effect The observed frequency of light from a source is equal to the actual frequency of the light generated by the source, times the quantity 1 plus the relative speed along the axis between the source and the observer if they are moving toward each other, or 1 minus the relative speed if they are moving away from each other Because most observations of the Doppler effect for light have been made in the context of astronomy, the equation for the Doppler effect for light generally is written in terms of wavelength rather than frequency Observed Light Frequency

The Wave Nature of Light The Doppler Effect Using the relationship λ = c/f and the v << c simplification, the following equation can be used for the Doppler shift, ∆λ, which is the difference between the observed wavelength of light and the actual wavelength This quantity is positive if they are moving away from each other or negative if they are moving toward each other Doppler Shift

The Wave Nature of Light The Doppler Effect A positive change in wavelength means that the light is red-shifted. This occurs when the relative velocity of the sources is in a direction away from the observer A negative change in wavelength means that the light is blue-shifted. This occurs when the relative velocity of the source is in a direction toward the observer When the wavelength is red-shifted (lengthens), the frequency is lower as a result of the inverse relationship between the two variables, because the speed of light remains constant When the wavelength is blue-shifted, the frequency is higher

The Wave Nature of Light The Doppler Effect Researchers can determine how astronomical objects, such as galaxies, are moving relative to Earth by observing the Doppler shift of light This is done by observing the spectrum of light coming from stars in the galaxy using a spectrometer Elements that are present in the stars of galaxies emit specific wavelengths of light in the lab A spectrometer is able to measure the Doppler shift of these wavelengths

The Wave Nature of Light The Doppler Effect In 1929, Edwin Hubble suggested that the universe is expanding Hubble reached his conclusion of the expanding universe by analyzing emission spectra from many galaxies Hubble noticed that the spectral lines of familiar elements were at longer wavelengths than expected The lines were shifted toward the red end of the spectrum No matter what area of the skies he observed, the galaxies were sending red-shifted light to Earth. Hubble concluded that all galaxies are moving away from Earth

The Wave Nature of Light Polarization Two polarizing filters are set up so that light from a source passes through both of them. The intensity of the light leaving the second filter is 0.750 times the intensity of the light leaving the first filter. What is the angle between the filters?

The Wave Nature of Light The Doppler Effect A light source generates light with a frequency of 5.45 x 1012 Hz. What is the observed frequency of this light if the observer is moving away from the source at 2.60 x 104 m/s?

The Wave Nature of Light The Doppler Effect How fast do you have to approach a source of yellow light (λ = 585 nm) to reduce the observed wavelength to 575 nm?