FlexMove 9.8 FL SERIES FL FL Series Characteristic Beam Width: 150mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required:

Slides:

Advertisements

Similar presentations

FlexMove FB SERIES 9.8 FBSB-40x40 UOM : 3 meter / length Support Beam 40x40 – Aluminium Anodized FBSB-64x64 Support Beam 64x64 – Aluminium Anodized FBSB-64x64C.

Advertisements

Statics Worksheet Solutions

BARTOSZEK ENGINEERING 1 The Design of the Booster Collimators Larry Bartoszek BARTOSZEK ENGINEERING 3/10/03.

HFA 2220 Series Incline Conveyor The 2220 Incline Conveyor features a a low profile yet extremely rigid anodized extruded aluminum frame ● angle adjustment.

Hot Rolled pickled steel

FlexMove FA SERIES 9.8 FAHBS-40 FAHBS-60 FAHBS-80 FA For 40mm horizontal crossing support beam UOM : pc For 64mm horizontal crossing support beam UOM :

Sheet-Metal Forming.

Important aspects to improve conveyor performance

Bucket elevators Basic types Pitched bucket elevator

MultiRail Horizontal Anchorage Device

Remaining lectures Last lecture by Dr. Darpe: Wed, 3 rd Oct Lectures by Prof S R Kale 22 st Oct (Mon) 24 th Oct (Wed) and 31 st Oct (Wed) 11am – 11:55am.

Methods of Attaching Components to a Shaft

Course Name : DESIGN OF MACHINE ELEMENTS

1. How is torque calculated?. Torque = Force X length of torque arm T = F x l.

MICE Collaboration Meeting at Frascati, Jun 26~29, 2005 Iron Shield Mounting Design Stephanie Yang.

Screws, Fasteners, and the Design of Nonpermanent Joints

When two gears make contact at the Pitch Point, the areas of contact on the face of each gear will have the same instantaneous tangential velocity Vt.

>80>80>90>70>70>60>60>50>50>29>40>40 Average 66.4 Median 69 High 96 Low 29.

POWER TRANSMISSION with BELTS & CHAINS

4.5 REINFORCED EARTH (terre armee) FILLS CAN BE FORMED PLACING "REINFORCEMENTS" IN THEM AND COMPACTING (GLASS FIBRE REINFORCED, PLASTIC FIBRE, TRYLENE.

T082 Q1. A uniform horizontal beam of length 6

Pacific school of engineering

Rolling element bearings A. Lozzi 09

PROFACT AUTOMATION SOLUTIONS. CONVEYOR SYSTEM PRODUCTS We deals in Conveying System in which we have a brand Flexkon covers following the following sectors.

Access Business Development Division ThyssenKrupp A Division of ThyssenKrupp Access Ltd Flow 2 Introduction.

Bridge Modules BKK and BKR

Automation Simplified conveyor system It is a system of mechanical handling equipment that moves materials from one location to.

Presentation Pasteruizer Chain for Glass Bottles.

Majorana collaboration meeting, Seattle, Aug.7 - Aug. 9 Béla MajorovitsGERDA detector mounting 1 GERDA Detector Mounting The Detector Holders Detector.

Problem-1 A section of commercial steel shafting 2.0 m long between bearings carries a 1000 N pulley at its midpoint, as shown in Figure. The pulley is.

Robotics – 8. Plates (2-sizes) Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Available in two sizes.

Experiment 11 Gearing.

Belt Drives and Chain Drives

Conservation of Energy. Machines.. Conservation of Energy Energy: the ability to do work. The Law of Conservation of Energy: Energy cannot be created.

Gearmotors \ Industrial Gear Units \ Drive Electronics \ Drive Automation Driving the worldUIG / mlr / Basic Product Training 2003 Only for Internal.

9.8 FK SERIES FK Series Characteristic Beam Width: 45mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required: FASR-25K OR.

Radial Ball Bearing Product Overview

FlexMove 9.8 FC SERIES FC FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required:

BullBot is bull robot that can have bull fight with techniques of butting or lifting. Learn how bull fight, Korean traditional game, had started and kinds.

FlexMove FS 9.8 FS SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum.

Machine Design - II ME 441 Lecture 6-2: Flexible Mechanical Elements Belts, Ropes and Chains Chapter 17 Dr. Mohammad A. Irfan Oct 12, Zul Hajj.

LEGO Construction Tips.

1 158 Kč 878 Kč 1 FlexMove <70 ks <4 ks

Chapter 8 Review. 1. How is torque calculated? T = F x l.

Garage Door Design Analysis

Standout Technical Designers MAE 416: ME Senior Design Sponsored by Cooper Hand Tools Brian SearsNate Ouellette Pooria Javidi Nathan Mize Chris EvansJustin.

Multi-Angle Photos to help you build.

FABRICATION OF GRAVITY CONVEYOR Presented by Pankaj Paithankar

STABILIZER SYSTEM Sponsor: Dr. Peyman Honarmandi SLAP Tech Andre Kerr, Pinhao Liang, Gabriel Pena, Shripal Shah 1.

ROLLING Rolling is a process of reduction of the cross-sectional area or shaping a metal piece through the deformation caused by a pair of metal rolls.

H, I & PLUS BEAM FABRICATION LINE WITH MATERIAL HANDLING

Aluminium Available in 1000mm wide

Flat-and Round-Belt Drives

Automatic Door System Sliding Operator SD-60A2 Specification 1.

Chapter 4 Mechanisms.

Clamping & Braking Elements - pneumatically

Present status of the flux return yoke design

V Belt & Rope Drive Problems

POWER TRANSMISSION with BELTS & CHAINS

Remaining lectures Last lecture by Dr. Darpe: Wed, 3rd Oct

Automated Capping System

Two-Gear Gear Trains Using different size gear allows change in speed

Motion STARTER Parts list Quick task: Discuss in pairs all the parts shown. Agree the function each of these parts for the Tumbler motion, and write your.

ANALYSIS AND DESIGN CONSEPT OF GRE PF RETAINING WALL

Two-Gear Gear Trains Using different size gear allows change in speed

Two-Gear Gear Trains Using different size gear allows change in speed

Two-Gear Gear Trains Using different size gear allows change in speed

Presentation Pasteruizer Chain for Glass Bottles

LIFT,ESCALATOR AND MOVING WALKS

Presentation transcript:

FlexMove 9.8 FL SERIES FL FL Series Characteristic Beam Width: 150mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required: FASR-25 OR FASR-25U Slide Rail Colour: WHITE OR NATURAL COLOUR Slide Rail Material: HDPE OR UHMW Slide Rail Rivet & Screw: FASLR-4X6 or FASLS-M5 Connecting strip is used to connect 2 beams. Connecting Strip: FACS-25x140A Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width to be conveyed can be referred to guide rail assembly pages. Conveyor Beam FLCB-3 UOM: pc Chain Connecting Module FLCC-160 UOM : 3 Meter / Length 8-1 FlexMove reserves the right to make alteration without prior notification Every care has been taken to ensure the accuracy of the information contained in this catalogue but no liability can be accepted for any error or omissions Kč <10 ks 984 Kč <2 ks

FlexMove UOM: 5 Meter / box Application: Suitable for horizontal and slope < 5° transport of products with accumulation. Standard Plain Chain FLPC-5 UOM: 5 Meter / box Application: Suitable for transport of static sensitive product.. Conductive Chain FLCD-5 Friction Top Chain FLFT-5 FL SERIES FL Chain Common Data Packaging: 5m per box Pitch: 35.5mm Width: 150mm Tensile Strength at 20°C: 6000N Colour: White & Black (Conductive) Material : - Chain: White Acetal / POM Pivot: Polyamide Pivot Pin : Stainless Steel Insert (Wedge & Friction): TPE Grey Example for FLRC-5B-L# # = 1 cleated top chain with alternate of # link of plain chain The above chain is FLRC-5B-L1, 1 link cleated top chain with alternate of 1 link of plain chain. Note: # = 1, 2, 3, 4, 5…..20 UOM: 5 Meter / box Application: Suitable for transport product in slope > 5 ° but <= 30 ° without accumulation Kč <5 ks

FlexMove UOM: 5 Meter / box Application: Suitable for accumulation of product with low friction and pressure.. Roller Top Chain FLRT-5 Roller Cleat Chain FLRC-5B-L# UOM: 5 METER/BOX Application: (Safety Chain) Suitable for horizontal and slope < 5° transport of products with accumulation. Standard Plain Chain-V FLPC-5V FL SERIES FL Roller Cleat Chain FLRC-5A-L# # = 1, 2, 3, 4, 5…..20 UOM: 5 Meter / box Application: Suitable for vertical transportation of product in slope with no accumulation. UOM: 5 Meter / box Application: Suitable for vertical transportation of product in slope with no accumulation

FlexMove FL Direct End Drive with Motor (LEFT) FLDD-0.25L, 0.37L, 0.55L FL Direct End Drive with Motor (RIGHT) FLDD-0.25R, 0.37R, 0.55R FL SERIES FL UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Direct End Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FLDD-0L represents direct drive without gear motor. Multi channel drives are available upon request. The Direct End Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FLDD-0R represents direct drive without gear motor. Multi channel drives are available upon request. FL Direct End Drive without Motor (RIGHT) FLDD-0R FL Direct End Drive without Motor (LEFT) FLDD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 1250N 9 398Kč 1 ks 9 398Kč 1 ks

FlexMove FL Suspended End Drive with Motor (LEFT) FLSD-0.25L, 0.37L, 0.55L FL Suspended End Drive with Motor (RIGHT) FLSD-0.25R, 0.37R, 0.55R FL SERIES FL UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Suspended End Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FLSD-0L represents suspended drive without gear motor. The Suspended End Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FLSD-0R represents suspended drive without gear motor. FL Suspended End Drive without Motor (RIGHT) FLSD-0R FL Suspended End Drive without Motor (LEFT) FLSD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 1250N

FlexMove FL SERIES FL UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter FL Idler End-325 FLIE Kč 2 ks

FlexMove 9.8 FL End Transfer Bridge c/w Roller for Drive Unit FLTB-DRR FL End Transfer Bridge w/o Roller for Drive Unit FLTB-DR FL End Transfer Bridge c/w Roller for Idler Unit FCTB-IER FL End Transfer Bridge w/o Roller for Idler Unit FLTB-IE FL SERIES FL Kč 1 ks Kč 1 ks

FlexMove FL Wheel Bend 180° FLWB-180R210 FL Wheel Bend 90° FLWB-90R210 FL Wheel Bend 60° FLWB-60R210 FL SERIES FL UOM : pc Chain required 2-way : 2.2 meter Slide rail required 2-way: 4.2 meter UOM : pc Chain required 2-way : 1.5 meter Slide rail required 2-way: 3.0 meter UOM : pc Chain required 2-way : 1.3 meter Slide rail required 2-way: 2.5 meter

FlexMove FL SERIES FL UOM : pc Chain required 2-way : 1.4 meter Slide rail required 2-way: 2.6 meter UOM : pc Chain required 2-way : 1.1 meter Slide rail required 2-way: 2.1 meter FL Wheel Bend 45° FLWB-45R210 FL Wheel Bend 30° FLWB-30R210 FL Wheel Bend 5° - 180° Example for FL Wheel Bend Ordering Wheel bend, Ɵ ° ± 1° FLWB- Ɵ °R210 If an angle of 65° is needed for wheel bend, so the ordering part number is FLWB-65R The outer bend is assembled using connecting strip (FACS-25x140A). Angle of Ɵ ° must be indicated when ordering.

FlexMove FL Horizontal Plain Bend 15° FL FL SERIES FL Horizontal Plain Bend 30° FL Horizontal Plain Bend 45° UOM : pc Chain required 2-way (500, 700, 1000) : 1.1, 1.2, 1.4 meter Slide rail required 2-way (500, 700, 1000): 2.2, 2.4, 2.8 meter Horizontal plain bend, 15° ± 1° R = 500 ± 10mm FLHB-15R500 R = 700 ± 10mm FLHB-15R700 R = 1000 ± 10mm FLHB-15R1000 Horizontal plain bend, 30° ± 1° R = 500 ± 10mm FLHB-30R500 R = 700 ± 10mm FLHB-30R700 R = 1000 ± 10mm FLHB-30R1000 UOM : pc Chain required 2-way (500, 700, 1000) : 1.4, 1.6, 1.9 meter Slide rail required 2-way (500, 700, 1000): 2.8, 3.2, 3.8 meter Horizontal plain bend, 45° ± 1° R = 500 ± 10mm FLHB-45R500 R = 700 ± 10mm FLHB-45R700 R = 1000 ± 10mm FLHB-45R1000 UOM : pc Chain required 2-way (500, 700, 1000) : 1.6, 1.9, 2.4 meter Slide rail required 2-way (500, 700, 1000): 2.9, 3.3, 3.9 meter

FL FL SERIES FL Horizontal Plain Bend 60° FL Horizontal Plain Bend 90° Horizontal plain bend, 90° ± 1° R = 500 ± 10mm FLHB-90R500 R = 700 ± 10mm FLHB-90R700 R = 1000 ± 10mm FLHB-90R1000 UOM : pc Chain required 2-way (500, 700, 1000) : 2.4, 3.0, 4.0 meter Slide rail required 2-way (500, 700, 1000): 4.8, 6.0, 8.0 meter Horizontal plain bend, 60° ± 1° R = 500 ± 10mm FLHB-60R500 R = 700 ± 10mm FLHB-60R700 R = 1000 ± 10mm FLHB-60R1000 UOM : pc Chain required 2-way (500, 700, 1000) : 1.9, 2.3, 2.9 meter Slide rail required 2-way (500, 700, 1000): 3.7, 4.6, 5.8 meter

FL FL SERIES FL Horizontal Plain Bend 180° Horizontal plain bend, 180° ± 1° R = 500 ± 10mm FLHB-180R500 R = 700 ± 10mm FLHB-180R700 R = 1000 ± 10mm FLHB-180R1000 UOM : pc Chain required 2-way (500, 700, 1000) : 4.0, 5.2, 7.1 meter Slide rail required 2-way (500, 700, 1000): 7.9, 1.1, 14.2 meter FL Horizontal Plain Bend 5° - 180° Example for FL Horizontal Plain Bend Ordering Horizontal plain bend, Ɵ ° ± 1° R = 500 ± 10mm FLHB- Ɵ °R500 R = 700 ± 10mm FLHB- Ɵ °R700 R = 1000 ± 10mm FLHB- Ɵ °R1000 If an angle of 120° is needed for radius R500 horizontal plain bend, so the ordering part number is FLHB-120R500 UOM : pc Chain required 2-way (500, 700, 1000) : meter (variable to angle) Slide rail required 2-way (500, 700, 1000): meter (variable to angle)

FlexMove FL FL SERIES FL Vertical Bend 5° FLVB-5R500 UOM: pc Chain required 2-way: 0.5 meter Slide rail required 2-way: 0.9 meter FL Vertical Bend 10° FLVB-10R500 UOM: pc Chain required 2-way: 0.5 meter Slide rail required 2-way: 1.0 meter

FlexMove FL FL SERIES FL Vertical Bend 15° FLVB-15R500 UOM: pc Chain required 2-way: 0.6 meter Slide rail required 2-way: 1.2 meter FL Vertical Bend 20° FLVB-20R500 UOM: pc Chain required 2-way: 0.7 meter Slide rail required 2-way: 1.4 meter

FlexMove FL FL SERIES FL Vertical Bend 30° FLVB-30R500 UOM: pc Chain required 2-way: 0.9 meter Slide rail required 2-way: 1.7 meter FL Vertical Bend 45° FLVB-45R500 UOM: SET Chain required 2-way: 1.2 meter Slide rail required 2-way: 2.3 meter

FlexMove FL SERIES FL FL Vertical Bend 5°-90° Example for FL Vertical Bend Ordering Vertical bend, Ɵ ° ± 1° FLVB- Ɵ °R500 If an angle of 65° is needed for vertical bend, so the ordering part number is FLVB-65R The outer bend is assembled using connecting strip (FACS-25x140A). Angle of “ Ɵ °” must be indicated when ordering.