Function Keys, Grid, Snap, Limits1 Function Keys, Grid, Snap Limits Sacramento City College EDT 310

Function Keys, Grid, Snap, Limits2 Material to Cover u Selecting AutoCAD Commands u Function Keys u Drawing with keyboard coordinates u LINE command u ID command u OSNAP settings u LIMITS u UNITS u SNAP u GRID and ORTHO

Function Keys, Grid, Snap, Limits3 Selecting AutoCAD Commands

Function Keys, Grid, Snap, Limits4 Selecting AutoCAD Commands u Commands may be selected in four ways u 1. Executed by picking a toolbar button or icon u 2. Selected from one of the pull-down menus u 3. Selected from the digitizer table menu overlay u 4. Typed at the keyboard

Function Keys, Grid, Snap, Limits5 Selecting AutoCAD Commands u Command Line Editing u You can select previously used commands by using the up and down arrow keys u This capability allows for fast, repeated use of the same command. u Just hit the “up” arrow to recall the command.

Function Keys, Grid, Snap, Limits6 Keys

7 The [Enter] key and the [Spacebar] Function Keys, Grid, Snap, Limits

8 The [Enter] key and the [Spacebar] u The [Spacebar] functions (most of the time) like the [Enter] key. u A good habit is to use your left thumb as the [Enter] key.

Function Keys, Grid, Snap, Limits9 Keys u The [Esc] key u Control Keys u Function Keys

Function Keys, Grid, Snap, Limits10 Keys u The [Esc] key u Cancels a command and returns to the Command: prompt

Function Keys, Grid, Snap, Limits11 Keys u Control Keys u Control functions are activated by pressing and holding the [Ctrl] key while pressing a second key.

Function Keys, Grid, Snap, Limits12 Keys u Ctrl B - Snap mode (toggle) u Ctrl C - Copy u Ctrl D - coordinate display on/off toggle u Ctrl E - crosshairs in isoplane toggle (left/right/top) u Ctrl G - Grid on/off toggle u Ctrl H - same as backspace u Ctrl K - PICKADD system variable toggle u Ctrl L - Ortho mode toggle u Ctrl O - Open

Function Keys, Grid, Snap, Limits13 Keys u Ctrl P - Print (Plot) u Ctrl R - toggle viewport u Ctrl S - Save u Ctrl T - Tablet mode toggle u Ctrl V - Paste u Ctrl X - Cut u Ctrl Y - Redo u Ctrl Z - Undo

Function Keys, Grid, Snap, Limits14 Drawing Aids

Function Keys, Grid, Snap, Limits15 Drawing Aids u AutoCAD provides drawing aids that help prepare the drawing layout, increase speed and efficiency and ensure accuracy. u GRID u SNAP u ORTHO

Function Keys, Grid, Snap, Limits16 The GRID

Function Keys, Grid, Snap, Limits17 The GRID u A grid is a predefined spacing of points which is used to help lay out a drawing u The GRID command places this pattern of dots at any desired spacing. u It can be equal or non-equal spacing u The grid pattern shows only within the drawing limits u Entering the GRID command provides a prompt showing the default grid spacing and several other options.

Function Keys, Grid, Snap, Limits18 The GRID Command

The GRID u GRID u Is a COMMAND and a TOGGLE u Command u Displays a grid pattern in the current viewport. u Toggle u Turns the display of the grid pattern in the current viewport ON or OFF. Function Keys, Grid, Snap, Limits19

Function Keys, Grid, Snap, Limits20 Grid Settings Right-click GRID button

Function Keys, Grid, Snap, Limits21

Function Keys, Grid, Snap, Limits22 GRID Command u GRID can also be set by using the Command: prompt. u More tedious to use than right-clicking GRID on Status Bar. u Command: GRID u Grid spacing (X) or ON/OFF/Snap/Aspect <0.5…): 0.25

Function Keys, Grid, Snap, Limits23 GRID Command u GRID on or off: u Click the GRID button on the Status Bar u or u The [F7] function key u or u [Ctrl + [G]

Function Keys, Grid, Snap, Limits24 GRID Command – Aspect Option u Aspect Option u Setting a different horizontal/vertical grid spacing can be done. u Type a different X, Y value. u From the Command: prompt u Select the Aspect option of the GRID command.

Function Keys, Grid, Snap, Limits25

Function Keys, Grid, Snap, Limits26 GRID Command – Aspect Option u Command: GRID u Grid spacing (X) or ON/OFF/Snap/Aspect : A u Horizontal spacing (X) : 1 u Vertical spacing (Y) :.5

Function Keys, Grid, Snap, Limits27 The SNAP Command

The SNAP u SNAP u Is a COMMAND and a TOGGLE u Command u Restricts cursor movement to specified intervals. u Toggle u Turns the SNAP action ON or OFF. Function Keys, Grid, Snap, Limits28

Function Keys, Grid, Snap, Limits29 SNAP u The cursor crosshairs move freely on the screen u It may be difficult to accurately place a point u It would be desirable to cause the cursor to move only to an invisible grid. u This is called “SNAP”. u Very useful u Makes drawing much easier and more accurate

Function Keys, Grid, Snap, Limits30 SNAP u Snap grid or snap resolution u controls the movement of the cross-hairs to this invisible grid. u It can be set to a different value than the GRID command. u The two commands SNAP and GRID are generally used together.

Function Keys, Grid, Snap, Limits31 The SNAP Command

Function Keys, Grid, Snap, Limits32 The SNAP Command u Properly setting the Snap Grid can greatly increase your drawing speed. u The SNAP command is used to set the invisible snap grid. SNAP Settings Right-click SNAP button

Function Keys, Grid, Snap, Limits33

Function Keys, Grid, Snap, Limits34 The SNAP Command u Setting SNAP can also be done at the Command: prompt u Command: SNAP u Snap spacing or ON/OFF/Aspect/Rotate/Style u Pressing [Enter] u accepts the value shown in brackets. u If a different spacing is required, such as 0.25, enter the new value.

Function Keys, Grid, Snap, Limits35 The SNAP Command u Command: SNAP u Snap spacing or ON/OFF/Aspect/Rotate/Style : 0.25 u This sets up snap at 0.25

Function Keys, Grid, Snap, Limits36 Rotating the SNAP Grid

Function Keys, Grid, Snap, Limits37 Rotating the SNAP Grid u The normal snap grid is horizontal rows and vertical columns. u The grid can be rotated using the Rotate option of the SNAP command. Command: SNAP Snap spacing or ON/OFF/Aspect/Rotate/Style : R Basepoint :(press [Enter], type a new coordinate value, or pick a new base point. Rotation angle : 25

Function Keys, Grid, Snap, Limits38 Setting the SNAP Style u The Style option of the SNAP command allows you to set the snap grid to either a u Standard (default) or u Isometric pattern. u Command: SNAP u Snap spacing or ON/OFF/Aspect/Rotate/Style : S u Standard/Isometric S

Function Keys, Grid, Snap, Limits39 Setting Grid Spacing Relative To SNAP Spacing u The visible grid can be set to be the same as the invisible snap grid. u Choose the Snap option of the GRID command.

Function Keys, Grid, Snap, Limits40 Setting Grid Spacing Relative To SNAP Spacing u Command: GRID u Grid spacing or ON/OFF/Aspect : 2x u In this case the GRID spacing would be 2x the SNAP setting.

Function Keys, Grid, Snap, Limits41 Limits

Function Keys, Grid, Snap, Limits42 The AutoCAD Drawing Area u The AutoCAD drawing area is basically INFINITE in all directions. u Think “outer space” u It is beneficial to “define a drawing area” that represents the size of your project. u LIMITS are the extent of the drawing area.

Function Keys, Grid, Snap, Limits43 The AutoCAD Drawing Area u LIMITS allow you to define a reasonable drawing area. u This area can be turned u On u Off u You can draw outside the area when LIMITS is turned off.

Function Keys, Grid, Snap, Limits44 Limits u LIMITS are the extent of the drawing area. u If you wanted a 17” x 11” drawing area, you would set the LIMITS to 17, 11. u The first number is the horizontal dimension. u The second number is the vertical dimension.

Function Keys, Grid, Snap, Limits45 Limits u LIMITS can be turned ON or OFF. u To set LIMITS, enter "LIMITS" at the Command: prompt. u AutoCAD restricts you from drawing outside the area defined by the LIMITS when the LIMTS are ON

Function Keys, Grid, Snap, Limits46 Limits u If you wanted an 11” x 8.5” drawing area, you would set the LIMITS to 11, 8.5. u The first number is the horizontal dimension (X dimension) u The second number is the vertical dimension (Y dimension)

Function Keys, Grid, Snap, Limits47 The “ORTHO” Mode

Function Keys, Grid, Snap, Limits48 The ORTHO Mode u The term ORTHO comes from the word “orthogonal”, which means at “at right angles”. u The ORTHO mode restricts the cursor movement to the X, Y plane ONLY.

Function Keys, Grid, Snap, Limits49 The ORTHO Mode u Turn ORTHO mode on or off with u The F8 key. u The Cntrl L key combination.