10 th Annual Sucker Rod Pumping Workshop Renaissance Hotel, Oklahoma City, Oklahoma September , 2014 Focus on Sucker Rod Pumping Technology, Information, Automation, Experiences

Sept. 16 – 19, Sucker Rod Pumping Workshop2 Copyright Rights to this presentation are owned by the company(ies) and/or author(s) listed on the title page. By submitting this presentation to the Sucker Rod Pumping Workshop, they grant to the Workshop, the Artificial Lift Research and Development Council (ALRDC), and the Southwestern Petroleum Short Course (SWPSC), rights to: –Display the presentation at the Workshop. –Place it on the web site, with access to the site to be as directed by the Workshop Steering Committee. –Place it on a CD for distribution and/or sale as directed by the Workshop Steering Committee. Other use of this presentation is prohibited without the expressed written permission of the author(s). The owner company(ies) and/or author(s) may publish this material in other journals or magazines if they refer to the Sucker Rod Pumping Workshop where it was first presented.

Sept. 16 – 19, Sucker Rod Pumping Workshop3 Disclaimer The following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course. A similar disclaimer is included on the front page of the Sucker Rod Pumping Web Site. The Artificial Lift Research and Development Council and its officers and trustees, and the Sucker Rod Pumping Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Sucker Rod Pumping Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained. The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations. The author is solely responsible for the content of the materials. The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources. The Sponsoring Organizations provide these presentations and/or training materials as a service. The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose.

Sept. 16 – 19, Sucker Rod Pumping Workshop4 General Chairman Mike Poythress Mike started his oilfield career in 1979 as a Service Tech for Axelson, Inc, based out of Houston. In 1985 he was promoted to District Manager and transferred to the Giddings Austin Chalk. With the arrival of horizontal wells in the early 90’s, much of the industry focused on bigger pumps and more production. During this time Mike was responsible for both the Giddings and Pearsall Austin Chalk, which gave him exposure to the challenges of pumping horizontal wells – both above and below the kickoff point. In 1994 Mike moved back to Houston and began traveling to fields throughout the US. Over the next 19 years his career took him through positions at Weatherford, CDI Energy Services (Axelson Pump Shops) and NOV Wilson. For most of the last 15 years, the majority of Mike’s time was spent working with customers to reduce failures through tracking pump components and failures. He has had the honor to travel to and work on projects in Argentina, Australia, Brunei, Canada, Indonesia, Mexico, Russia, Trinidad, Ukraine and Venezuela – oh, and California. In March 2014 he joined ConocoPhillips’ Global Production Engineering Team as the Artificial Lift Specialist for Beam Pumping wells. Among Mike’s many blessings, is to have been married to his wife Susan, for the last 32 years. They have one daughter, Michelle, who is the very best daughter ever, even though she decided to avoid the oilfield and become a 3 rd grade teacher. Mike and Susan recently move back to Houston from behind the Pine Curtain (Tyler, Texas).

Sept. 16 – 19, Sucker Rod Pumping Workshop5 Keynote Speaker With an engineering degree from Oklahoma State University and graduate work in industrial engineering, Richard Spears has worked for 34 years in the upstream oil and gas industry, starting as a field engineer for Halliburton. Today, Richard is one of the managing directors of Spears & Associates, an oilfield market research firm founded in The firm has 400 clients worldwide, including all major oil companies, many national oil companies, all major service companies and over one hundred private and institutional investors. Richard has been with the firm since 1985 and leads the firm’s mergers and acquisitions support practice. Richard is a 28 year member of the Society of Petroleum Engineers and was an SPE Distinguished Lecturer 2005 ‐ He is also a 26 year member of the Association of Energy Service Companies. Richard is on the board of directors and is an owner of several oilfield service companies: Varel International, a global drill bit manufacturer; Federal, the company that built the devices that ultimately plugged the BP Macondo blowout; Allied Wireline, an oilfield service company that is commercializing GE’s digital openhole logging technology; and W-Technology, a manufacturer of MWD components.

Sept. 16 – 19, Sucker Rod Pumping Workshop6 Gal Friday Ronda Brewer Southwestern Petroleum Short Course and ALRDC Very special thanks to Ronda. Without her hard work and dedication, this Workshop couldn’t come together as well as it does. Thank You!

Sept. 16 – 19, Sucker Rod Pumping Workshop7 Continuing Education Courses One-Day Courses on Tuesday Course Basic Sucker Rod Pumping –Tom vanAkkerenTues: 8:00 – 5:00Room 20 Course Shooting and Interpreting Fluid Levels in Sucker Rod Wells –Lynn RowlanTues : 8:00 – 5:00Room 19 Course Dynagraph Analysis –Louis RayTues: 8:00 – 5:00 Room 18 Course Dealing with Corrosion –Norm HeinTues: 8:00 – 5:00 Room 16

Sept. 16 – 19, Sucker Rod Pumping Workshop8 Continuing Education Courses One-Day Courses on Wednesday Course Sucker Rod Pump Automation Hardware and Software –Anthony AllisonWed: 8:00 – 5:00Room 18 Course Troubleshooting Rod and Pump Problems –Lynn RowlanWed: 8:00 – 5:00Room Course School for Pumpers –Mike BrockWed: 8:00 – 5:00Room 16

Sept. 16 – 19, Sucker Rod Pumping Workshop9 Continuing Education Courses Two-Day Course on Tuesday & Wednesday Course Care, Handling, Best Practices, and Failures –Mike BrockTues & Wed: 8:00 – 5:00Room 17 –Mike Poythress –Russell Stevens –Rodney Sands

Sept. 16 – 19, Sucker Rod Pumping Workshop10 Technical Sessions INew Technology, R&D –Thursday: 7:55 – 12:00 Rooms 19 – 20 –Chair: Brent Thomas, Tom vanAkkeren –Sandia DynagraphsEchometer –TroubleshootingCOG Operating –Sucker Rod MythsNorris Rods –Stress AnalysisWeatherford –Gas Assisted Rod PumpGARP –Downhole CounterbalanceLOTRAM –Vector RodVector Sum, Inc.

Sept. 16 – 19, Sucker Rod Pumping Workshop11 Technical Sessions IIDesign, Automation, Optimization, Challenges –Thursday: 1:30 – 4:00 Rooms –Chair: Norm Hein, Anthony Allison –Load Cell Simulation Norris –Fluid Level Sensing Reservoir Management –Downhole Separation Echometer –Enhanced Analysis Echometer III Case Histories, Experiences, Best Practices –Friday: 7:55 – 12:00Rooms –Chair: Dr. Victoria Pons, Rick Web –Animation Echometer –Downhole Separation Echometer –Gas Free Pump Wells Whisper –Pumping Coal Fines ConocoPhillips –Runtimes for Deviated Wells ConocoPhillips –

Sept. 16 – 19, Sucker Rod Pumping Workshop12 Breakout Sessions IUnderstanding Issues Faced by Operations –Thursday: 4:30 – 6:00 –Room 19 – 20 –Facilitator: Tom Cochrane IIRod Pumping System Failure Frequency and Failure Analysis –Thursday: 4:30 – 6:00 –Room 16 –Facilitator: Mike Poythress IIIRod Pumping Horizontal Wells –Thursday: 4:30 – 6:00 –Room 17 –Facilitator: Norm Hein

Sept. 16 – 19, Sucker Rod Pumping Workshop13 Workshop Sponsors Artificial Lift R&D Council Dover Artificial Lift South Western Petroleum Short Course

Sept. 16 – 19, Sucker Rod Pumping Workshop14 Workshop Sponsors Texas Tech. Dept. of Petroleum Engineering Weatherford

Sept. 16 – 19, Sucker Rod Pumping Workshop15 Workshop Exhibitors Black Gold Pump & Supply Distribution NOW Dover Artificial Lift Echometer, Inc.

Sept. 16 – 19, Sucker Rod Pumping Workshop16 Workshop Exhibitors Tenaris

Sept. 16 – 19, Sucker Rod Pumping Workshop17 Workshop Meals & Events Tuesday Continuing Education (8:00 – 5:00) ALRDC Board Meeting (6:30 pm, at Workshop Hotel) Wednesday Continuing Education (8:00 – 5:00) Reception (5:15 – 7:00) Thursday Technical Session (7:55 – 12:00) Lunch (12:00 – 1:00) Keynote Address (1:00 – 1:30) Technical Session (1:30 – 4:00) Breakout Sessions (4:30 – 6:00) Friday Technical Session (7:55 – 12:00) Door prizes (12:00 – 12:10) Lunch (12:10 – 1:30) Steering Committee (12:10 – 1:30)

Sept. 16 – 19, Sucker Rod Pumping Workshop18 Presentations on the Web Use the ALRDC Web Site –Go to: Workshops Fall 2014 Sucker Rod Presentations (or Breakouts) Access Code: 2014EE8