1 Division Appareillage et Système Résidentiels 1 IP SYSTEM Wiring Devices and Home Systems Division

2 Division Appareillage et Système Résidentiels SETTING PC with WINDOWS XP

3 Division Appareillage et Système Résidentiels  SETTING  CONTROL PANNEL    ACTIVATION UPNP CONNECTION (MANDATORY) SYSTEM TROUBLESHOOTING:

4 Division Appareillage et Système Résidentiels MANDATORY “Start  Control Panel  Administrative Tools  Services” and start and set as “Automatic” the following services: SSDP Discovery Service Universal Plug and Play Device Host

5 Division Appareillage et Système Résidentiels SYSTEM TROUBLESHOOTING: MANDATORY setting parameters : -Disable FIREWALL -Enable UPNP

6 Division Appareillage et Système Résidentiels “C:\ProgramFiles\CommonFiles\Bticino\BtCommunicationServer\Bticino.OpenServer.exe ” SYSTEM TROUBLESHOOTING: MANDATORY :ENABLE THE BTICINO.OPENSERVER On the WINDOWS FIREWALL go to the EXCEPTION MENU and ADD a program following this link:

7 Division Appareillage et Système Résidentiels Go to “Start  Control Panel  Windows Firewall  Allow a program or feature through Windows Firewall  Change settings” and enable “Network Discovery” and “Bticino.OpenServer.exe” (you must click “Add Program…”  “Browser” and select “C:\Program Files\Common Files\Bticino\BtCommunicationServer\Bticino.OpenServer.exe” for x86 platform or “C:\Program Files (x86)\Common Files\Bticino\BtCommunicationServer\Bticino.OpenServer.exe” for x64 platform. For both program you must enable “Home/Work (Private)” and “Public”. How disable FIREWALL using WINDOWS 7 ?

8 Division Appareillage et Système Résidentiels Go to “Start  Control Panel  Network and Sharing Center  Change Advanced sharing settings” and activate the “Network Discovery” Then go to “Start  Control Panel  Administrative Tools  Services” and start and set as “Automatic” the following services: SSDP Discovery UPnP Device Host How to enable UPNP SERVICE using WINDOWS 7?

9 Division Appareillage et Système Résidentiels HOW RUN A SW IN DIAGNOSTIC MODALITY?

10 Division Appareillage et Système Résidentiels SOFTWARE TROUBLESHOOTING: HOW RUN THE SOFTSWITCHBOARD IN DIAGNOSTIC WAY? -Create a link on the desktop of the SW SOFTSWITCHBOARD -Change the properties adding “ /LOG” FOR WINDOWS XP: C:\Documents and Settings\Name Surname\Documents\BTicino\SoftSwitchboard_0300\logs FOR WINDOWS VISTA and 7: C:\Users\Name Surname\Documents\BTicino\SoftSwitchboard_0300\logs WHERE I FOUND THE LOGS FILES?

11 Division Appareillage et Système Résidentiels SOFTWARE TROUBLESHOOTING: HOW RUN THE ALARM MANAGER IN DIAGNOSTIC WAY? -Create a link on the desktop of the SW ALARM MANAGER -Change the properties adding “ /LOG=1” FOR WINDOWS XP: C:\Documents and Settings\Name Surname\Documents\BTicino\AlarmManager_0100\logs FOR WINDOWS VISTA and 7: C:\Users\Name Surname\Documents\BTicino\AlarmManager_0100\logs

12 Division Appareillage et Système Résidentiels WHERE I FOUND THE LOGS FILE? WINDOWS XP  c:\document and settings\all user\application data\BTicino\VDESystemSuite\SVR\Logs To activate logs for BtCommunicationServer and BtAlarmLogger you must respectively modify these text files: C:\Program Files \Common Files\Bticino\BTAlarmLogger\Bticino.AlarmLogger.exe.config C:\Program Files \Common Files\Bticino\BtCommunicationServer\Bticino.OpenServer.exe.config Select and OPEN it with note pad. You must set to 1 the tag under “LOGLEVEL”: SOFTWARE TROUBLESHOOTING:

13 Division Appareillage et Système Résidentiels THE END