PBv2.x Pen F/W Upgrade SOP WWPM_Brian Hung 2011/12/21

1. Plug the H/W tool to PC via USB port. The H/W tool only support Windows XP!!

1. Find the device from device manager 2. Browse the folder of “WinXP driver” to update the driver. Install H/W Tool Driver

Install F/W Upgrade Program 1. Execute “FET-Pro430-Setup.exe“ and finish the installation process

1. Turn off the PB. 2. Connect the PB to H/W tool.

1. Execute “Lite FETPro430”

1. Change the setting as the figure.

1. Change the “Memory Options“ as the figure.

1. Change the “Connection/Device Reset“ as the figure.

1. Click “Open Code File” and choose correct F/W file.

1. Click “AUTO PROG.”.

1. Check the Status is Pass 2. Check if the Check sum of source and memory are the same.