*INVERPUL EPOXY PRIMER ANTICORROSIVE Inverpul Specialties *INVERPUL EPOXY PRIMER ANTICORROSIVE

*INVERPUL EPOXY PRIMER ANTICORROSIVE Inverpul Specialties Cod. 87130 *INVERPUL EPOXY PRIMER ANTICORROSIVE GENERAL FEATURES Thermosetting powder with epoxy resins cured with a fit hardener, containing special anticorrosive pigments, zinc metallic free. The product is used for anticorrosive protection of metal structures, mainly on sand blasted to the Sa 2½-3 grade supports, like a primer (thickness 50-70 Micron) before further coating with Inverpul Polyester or Epoxypolyester powder and 2K liquid enamel like Inverplast and Inverpur.

*INVERPUL EPOXY PRIMER ANTICORROSIVE Inverpul Specialties Cod. 87130 *INVERPUL EPOXY PRIMER ANTICORROSIVE Result after 1 year of exposure in industrial environment Support used: Sand blasted steel Sa 2½ grade Cycle with Polyester Extra 120 mm in all

*INVERPUL EPOXY PRIMER ANTICORROSIVE Inverpul Specialties Cod. 87130 *INVERPUL EPOXY PRIMER ANTICORROSIVE Results after 750 hours of salt spray test Cycle with Polyestere Extra 120 mm in all Competitor zinc rich Primer Inver Primer

*INVERPUL EPOXY PRIMER FZ GREY Cod. 87130 *INVERPUL EPOXY PRIMER FZ GREY Results after 750 hours of salt spray test (comparison among Inver epoxy primer with zinc phosphates and competitors zinc rich primers) Competitor 1 Competitor 2 Inver Support used: Sand blasted steel Sa 2½ grade Competitor 3

Inverpul Specialties Cod. 87130 *INVERPUL EPOXY PRIMER ANTICORROSIVE Principal differences between a rich zinc primer (competitors) and the cod. 87130 Inver Competitors Inver Tap bulk density 1,4 0,675 Yield at 1 mm 365 m2 675 m2 (+ 85%) Salt spray test on smooth steel (250 h) No adhesion Good resistance